Pin Function Grouping
Looking at the datasheet of this component, can you group together pins by their functions? for example for Power, 3v3, gnd_1 gnd_2 etc
NOTE: If you group them, can you not add the same pin if you already added them in a group? You should know which pin function is common for its function
Thought for 1 min 14 sec
Yes — from the BME280 datasheet pin table, I’d group each pin exactly once like this:
Table
| Functional group | Pins |
|---|---|
| Power | Pin 8: VDD — analog supply; Pin 6: VDDIO — digital/interface supply |
| Ground | Pin 1: GND, Pin 7: GND |
| Communication / Interface | Pin 2: CSB — chip select; Pin 3: SDI — serial data input / SDA; Pin 4: SCK — serial clock / SCL; Pin 5: SDO — serial data output / I²C address select |
No pin is duplicated across groups. For naming, I’d keep both ground pins in the same Ground group but label them separately as
GND_1 = pin 1 and GND_2 = pin 7 if the symbol needs unique terminal names.Update pin groups
Check BME280 connections
Verify pin naming
Run ERC checks
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.