The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template #hat

Controller for vending machine. Use stm32f407, pressure sensor HX711, FRAM, TFT display connectivity.

Autonomous irrigation system for up to 4 individual pots. It has an integrated humidity, pressure and temperature sensor, as well as 4 ports for soil moisture sensors. #esp32 #iot #matter

OpenSpritzer, an open hardware pressure ejection system for reliably delivering picolitre volumes.

AHT20+BMP280 Temperature Humidity Pressure Module High-Precision Digital Sensors #I2C #AHT20 #BMP280 #part #digital

AHT20+BMP280 Temperature Humidity Pressure Module High-Precision Digital Sensors #I2C #AHT20 #BMP280 #part #digital

OpenSpritzer, an open hardware pressure ejection system for reliably delivering picolitre volumes. Designed for ease of use, robustness and low-cost, the “Openspritzer” is an open hardware “Picospritzer” as routinely used in biological labs around the world. The performance of Openspritzer and commercial alternatives is effectively indistiguishable. It uses Arduino Nano.

Board packed with sensors to measure mainly pressure and temperature, but also acceleration, humidity, temperature.

ESP8684H4 based thermostat module which will control the heater. The module will have 18650 Li-Ion battery cell with 3.7V nominal voltage. The module also has a switch-mode buck NVDC power path which can simultaneously charge the battery and provide power to the system. The system voltage is 3.3V. Input voltage is 5V from USB-C. The system also contains a temperature, humidity and pressure sensor. The Wi-Fi and Bluetooth antenna implemented by PCB tracks.

The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template #hat

The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template #hat

Autonomous irrigation system for up to 4 individual pots. It has an integrated humidity, pressure and temperature sensor, as well as 4 ports for soil moisture sensors. #esp32 #iot #matter

The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template #hat

OpenSpritzer, an open hardware pressure ejection system for reliably delivering picolitre volumes.

BME280 Humidity + Barometric Pressure + Temperature Sensor

The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template #hat

This project develops an ESP32-based differential pressure measurement module using the Sensirion SDP810-500Pa sensor for ventilation diagnostics (Ventilation OBD system). The device measures airflow pressure differences across filters, ducts, and fans to evaluate system performance and detect blockages or imbalances.

The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template #hat

The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template #hat

The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template #hat

The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light #RaspberryPi #Raspberry #Pi #RPi #Pico #template #project #project-template #hat

- ESP32 DevKitC V4 (microcontroller) - 2x BME280 sensors (temperature, humidity, pressure) - 8ch relay board with 12VDC relays (NO/NC SPDT) - 12VDC power supply - USB connectivity - Various components (resistors, caps, opto couplers, op-amps, motor drivers, multiplexers) - 2x SPDT relay boards (for fan fail-safe) - 4x 2ch bidirectional level controllers (3.3V to 5V) - ESP32 GPIO 21 (SCL) to BME280's SCL - ESP32 GPIO 22 (SDA) to BME280's SDA - ESP32 GPIO 5 (digital output) to 8ch relay board input - ESP32 GPIO 25 (PWM output) -> Fan PWM (0-255 value) - ESP32 GPIO 26 (PWM output) -> Light PWM (0-255 value) - ESP32 GPIO 34 (analog input) -> Tachometer input (0-4095 value, 12-bit ADC) - Add a 5V voltage regulator (e.g., 78L05) to power the ESP32 and other 5V components - Add a 3.3V voltage regulator (e.g., 78L03) to power the BME280 sensors and other 3.3V components - Include decoupling capacitors (e.g., 10uF and 100nF) to filter the power supply lines - Ensure proper grounding and shielding to minimize noise and interference -- Power supply: - VCC=12VD Available, to be used for LM358P - 5V voltage regulator (78L05) - VCC=5V, GND=0V - 3.3V voltage regulator (78L03) - VCC=3.3V, GND=0V - 3.3V voltage regulator (78L03) - VCC=3.3V, GND=0V - Fan PWM boost: - Input (3.3V PWM): 0-3.3V, frequency=20kHz - Output (5V PWM): 0-5V, frequency=20kHz - LM358P op-amp (unity gain buffer) - VCC=5V, GND=0V - R1=1kΩ, R2=1kΩ, R3=1kΩ, R4=1kΩ - C1=10uF (50V), D1=1N4007 - 0-10V signal conditioning: - Input (3.3V PWM): 0-3.3V, frequency=13kHz - Output (0-10V): 0-10V, frequency=13kHz - LM358P op-amp (non-inverting amplifier) - VCC=5V, GND=0V - R5=2kΩ, R6=1kΩ, R7=2kΩ, R8=1kΩ, R9=1kΩ, R10=2kΩ - C2=10uF (50V), R11=10kΩ (1%) ------------------------------------ Fan PWM Boost (3.3V to 5V): 1. ESP32 GPIO 25 (PWM output) -> R1 (1kΩ) -> VCC (3.3V) 2. ESP32 GPIO 25 (PWM output) -> R2 (1kΩ) -> Vin (LM358P) 3. LM358P (Voltage Follower): - VCC (5

Board packed with sensors to measure mainly pressure and temperature, but also acceleration, humidity, temperature.

Board packed with sensors to measure mainly pressure and temperature, but also acceleration, humidity, temperature.

Board packed with sensors to measure mainly pressure and temperature, but also acceleration, humidity, temperature.