Part Datasheet Review and Verification
1:36
Using Schematic Tool.
Using PCB Layout Tool.
Using BOM Tool.
Looking for "part description and ordering information including package, number of positions, mounting style, dimensions, and special features" in DDEController?Action=srchrtrv&DocNm=1-1773962-8&DocType=Data%20Sheet&DocLang=English&PartCntxt=6473711-1&DocFormat=pdf
Looking for "electrical characteristics including current rating, voltage rating, contact resistance, insulation resistance, dielectric withstanding voltage, and operating temperature" in DDEController?Action=srchrtrv&DocNm=1-1773962-8&DocType=Data%20Sheet&DocLang=English&PartCntxt=6473711-1&DocFormat=pdf
Looking for "absolute maximum ratings or environmental and mechanical specifications including durability, vibration, shock, and flammability" in DDEController?Action=srchrtrv&DocNm=1-1773962-8&DocType=Data%20Sheet&DocLang=English&PartCntxt=6473711-1&DocFormat=pdf
Looking for "recommended operating conditions and application specification references" in DDEController?Action=srchrtrv&DocNm=1-1773962-8&DocType=Data%20Sheet&DocLang=English&PartCntxt=6473711-1&DocFormat=pdf
Looking for "pin descriptions or contact numbering and row layout for all 26 positions plus mounting holes" in DDEController?Action=srchrtrv&DocNm=1-1773962-8&DocType=Data%20Sheet&DocLang=English&PartCntxt=6473711-1&DocFormat=pdf
Looking for "package dimensions and recommended pcb layout including hole diameters, pad sizes, pitch, row spacing, connector body size, and mounting hole locations" in DDEController?Action=srchrtrv&DocNm=1-1773962-8&DocType=Data%20Sheet&DocLang=English&PartCntxt=6473711-1&DocFormat=pdf
Looking for "special features including contact plating, boardlock, shrouding, mating interface, polarization, and compliance information" in DDEController?Action=srchrtrv&DocNm=1-1773962-8&DocType=Data%20Sheet&DocLang=English&PartCntxt=6473711-1&DocFormat=pdf
Using PCB Layout Tool.
Considering.
Using PCB Layout Tool.
Ordering.
Project metadata
| Field | Value |
|---|---|
| MPN | 6473711-1 |
| Manufacturer | TE Connectivity |
| Part type | Connectors |
| Mount | PCB |
| Designator prefix | J |
| Datasheet URL already present | Yes |
| BOM mapping | Current BOM shows only generic internal terminals, not a resolved purchasable placed part entry |
Datasheet-described product
| Field | Value |
|---|---|
| Product | 1.0 mm Header, Superseal 1.0, 26 way, 1 key (2 row), black, 90° molded gold pins, PCB mount, upper locking |
| Series | Superseal 1.0 |
| Orientation | Right Angle |
| PCB termination | Through Hole - Solder |
| Positions | 26 |
| Rows | 2 |
| Mounting holes | With |
| Mating pin diameter | 1 mm [.039 in] |
| Pitch | 3.5 mm [.138 in] |
| Connector width | 23 mm [.905 in] |
| Connector length | 62 mm [2.44 in] |
| Profile height from PCB | 22.3 mm [.877 in] |
| Locking | Upper locking |
| Keying | 1 key |
| Contact finish | Gold pins |
Electrical characteristics
| Parameter | Datasheet value |
|---|---|
| Current rating | Up to 15 A |
| Voltage rating | 250 V AC, DC |
| Dielectric withstanding voltage | 1000 V AC or 1600 V DC for 1 minute between contacts and between contact and earth |
| Insulation resistance | 100 megohms minimum |
| Operating temperature | -40°C to +125°C for gold plated, -40°C to +105°C for tin plated |
Environmental / reliability / mechanical performance
| Parameter | Datasheet value |
|---|---|
| Durability | 10 cycles at maximum rate of 600 cycles per hour |
| Physical shock | 50 G half-sine shock pulses of 11 ms duration; three shocks in each direction along 3 mutually perpendicular planes, 18 total shocks; no discontinuities of 1 microsecond or longer duration |
| Random vibration | 10 Gs for 8 hours each plane, 10-500 Hz frequency range |
| Immersion | Leakage current not to exceed 50 micro-amperes at 48 V DC; immerse to 100 mm in 5% salt water at 23 ± 5°C for 1 hour |
Recommended operating / application information
| Item | Datasheet value |
|---|---|
| Contact system | Accepts contact size 1.0 mm |
| Wire size | 1.25-0.50 mm² |
| Supported cavity arrangements | 26, 34, and 60 |
| Housing | Rectangular, thermoplastic housing |
| Latch | Integrated latch for mating |
| Contact retention / alignment | TPA confirms contact alignment and retention |
| Reference documents | 108-78140 and 114-78011 |
Pin / contact information
| Item | Datasheet result |
|---|---|
| Contact count | 26 positions |
| Row count | 2 rows |
| Numbering / row layout | The datasheet extraction confirms 26 positions, 2 rows, but did not return a full per-pin functional description table because this is a passive connector header. |
| Mounting features | 2 mounting holes present |
Package / mechanical dimensions
| Parameter | Datasheet value |
|---|---|
| Connector length | 62 mm [2.44 in] |
| Connector width | 23 mm [.905 in] |
| Profile height from PCB | 22.3 mm [.877 in] |
| Pitch | 3.5 mm [.138 in] |
| Mating pin diameter | 1 mm [.039 in] |
| Mount retention | Mounting Hole |
| PCB layout drawing in extracted datasheet text | Not fully extractable from the PDF text returned |
Special features
| Feature | Datasheet value |
|---|---|
| Keying / polarization | 1 key, enhanced keying to prevent mis-mating |
| Locking | Upper locking |
| Finish | Gold plated contacts / gold pins |
| Orientation | 90° molded / right angle |
| Color | Black |
| Mating system protection | Polarization and keyed geometry intended to prevent incorrect mating |
What matches
| Check | Result |
|---|---|
| Signal positions | Match: project has 26 numbered contacts |
| Mechanical holes | Match: project includes 2 mounting-hole pads |
| Overall pin concept | Match: 26 electrical contacts plus 2 mechanical features is consistent with the datasheet |
Issues / risks found
| Issue | Risk |
|---|---|
| The part project is built as separate generic pins/pads rather than a single fully defined connector symbol with named pins | High risk of poor library quality, harder reuse, weak BOM behavior, and easier accidental mis-ordering |
| All symbol pins are marked Pin Type: Unspecified | ERC quality is degraded; incorrect interface checking may be missed |
| No resolved purchasable BOM entry is shown for the placed object set | Risk of manufacturing/order confusion if this published part is reused without a proper mapped component identity |
| Project description shows Connector Length 57.4 mm, while the datasheet extraction reports 62 mm [2.44 in] | Mechanical metadata mismatch; this can cause enclosure or placement mistakes if someone trusts the project properties instead of the datasheet |
| No extracted evidence of footprint drill sizes, pad sizes, row spacing, or exact mounting-hole coordinates from the current accessible data | Cannot fully verify manufacturability of the footprint land pattern from the available extracted geometry alone |
| Datasheet-specific connector attributes like upper locking, 1 key, right angle, and gold pins are not clearly represented as structured footprint/symbol constraints | Risk of creating a visually similar but mechanically wrong part variant |
Status
| Area | Result |
|---|---|
| MPN / description consistency | Mostly good |
| Datasheet presence | Good |
| Electrical metadata coverage | Good |
| Symbol quality | Needs improvement |
| Footprint manufacturability verification | Incomplete from currently extractable dimensions |
| Ordering risk | Moderate to high unless the part is converted into a proper single connector component with locked metadata |
- The mechanical length mismatch (57.4 mm in project description vs 62 mm in datasheet) should be corrected.
- The part should not rely on 28 generic internal pins/pads as its final published representation if you want safe reuse.
- The footprint cannot be fully signed off for manufacturing until the exact PCB drawing dimensions are verified against the TE product drawing/CAD files.
Ready.
Reviews
- Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portaljharwinbarrozo43.0M
- Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #powerjharwinbarrozo11.4M
- A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #genericsjharwinbarrozo15.5k
- An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.Terminal
- 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlinkjharwinbarrozo1.2M
- 10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcanjharwinbarrozo1.2M
- Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlinkjharwinbarrozo1.1M
Pricing & Availability
See prices from popular manufacturers for your project.
Assets
6473711-1
64737111.kicad_modFootprint
6473711-1-thumb.png
6473711-1-thumbThumbnail
6473711-1
6473711-1 Symbol.svgDefault6473711-1
6473711-1.stp3D ModelControls
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.