Part Verification and Datasheet Analysis

Thought for 10 mins 41 sec

Done. I reviewed the part project, used the existing official TE document set, and cross-checked what is currently defined in the part against the available manufacturer documentation.

1) Part information currently available in the project Project metadata summary

Table

Field	Value
MPN	2-6437285-9
Manufacturer	TE Connectivity
Part type	Connector
Mount	PCB mount
Description from project	26-position, 4-row, horizontal/right-angle style connector, black, gold-plated, 1 mm system
Existing datasheet URL	PDF

Schematic/symbol summary

Table

Item	Observed
Symbol pin count	26
Pin numbering present	1 to 26
Per-pin names	Not defined
Per-pin descriptions	Not defined
Pin electrical type	All set to Unspecified
Nets	None defined

Footprint/layout summary

Table

Item	Observed
Footprint present	Yes
Pad count	26 pads
Pad numbering present	1 to 26
Detailed pad geometry from layout API	Not exposed in retrieved data
Stackup/rules in part project	None returned

2) Datasheet property status

A datasheet URL was already set on the part, so no property update was required.

I also found the official TE product page and related official documents for this MPN:

TE product page
SUPERSEAL 1.0 catalog PDF
TE product spec reference: 108-78140
TE product drawing listed on product page: JPN_CD_2-6437285-9_A.pdf

3) Datasheet/document scan summary Identified part

Table

Field	Value
Official description	1.0 mm Header, Superseal 1.0, 26 way, 2 key (4 row), black, 90° molded gold pins, PCB mount, double locking
Orientation	90° / right angle
Positions	26
Rows	4
Keying type	2 (4 row)
Locking	Double
Mating plug housing	1-1447232-7

Mechanical/package metadata

Table

Field	Value
Connector style	Header
Mounting	PCB mount
PCB termination	Through Hole - Solder
Profile height from PCB	21.4 mm
Connector length	39.6 mm
Connector width	23 mm
Pitch / centerline reported in accessible docs	3 mm / 3.5 mm
Mounting holes	With
PCB mount alignment	Without
PCB mount retention	Without

Electrical characteristics found in accessible official docs

Table

Parameter	Value
Voltage rating	250 V AC, DC
Insulation resistance	100 MΩ minimum
Dielectric withstanding	1000 V AC or 1600 V DC for 1 minute between contacts and between contact and earth
Current rating	Up to 15 A
Operating temperature	-40 °C to +125 °C

Materials / finish

Table

Field	Value
Contact material	Brass
Contact finish, mating part	Gold over Ni
Contact finish, soldering/crimp area	Tin-lead over Ni or catalog variants note tin/tin-lead family differences
Housing material	PBT/PET

Environmental / special features

Table

Feature	Value
Sealable	Yes
Ingress protection	IP67 for all versions, IP69K with backshell for flange and lever version
Keying / polarization	Keyed
Locking	Double locking
Vibration note	Random vibration testing referenced in product spec 108-78140

Pin descriptions

Table

Item	Result
Individual functional pin names	Not found in accessible TE catalog/spec extracts
Cavity numbering map / viewed-from drawing	Not retrieved from accessible extracts
Practical interpretation	This is a numbered connector; pins appear to be position numbers rather than function-specific signal names

Absolute maximum ratings

Table

Item	Result
Explicit "Absolute Maximum Ratings" table	Not found

That is normal for many connector documents: TE provides performance/specification data rather than IC-style absolute max tables.

4) Cross-check: symbol and footprint vs manufacturer docs What matches

Table

Check	Result	Notes
MPN	Match	Project MPN matches TE docs
Part family	Match	SUPERSEAL 1.0 header
Position count	Match	26 positions in project and docs
Row count	Match	4-row called out in docs
Orientation	Match	Right-angle / 90° matches docs
Mounting style	Match	PCB mount, through-hole style matches docs
Pad/pin count	Match	26 schematic pins and 26 footprint pads present

Flags and potential issues

Table

Severity	Finding	Why it matters
High	Footprint geometry could not be fully verified against the TE product drawing	I could confirm pad count, but not the exact hole sizes, pad sizes, row spacing, or mechanical hole locations from the retrieved Flux/layout data. That means there is still a manufacturing-risk gap until the footprint is checked against JPN_CD_2-6437285-9_A.pdf or TE CAD.
Medium	Symbol pins have no names/descriptions and all pin types are Unspecified	This will not usually break manufacturing, but it increases the chance of wiring mistakes and weak ERC behavior in downstream designs.
Medium	No retrieved cavity identification view from the manufacturer drawing	The project has numbered pins, but without the official cavity map/drawing view, I cannot confirm that the symbol's left/right visual arrangement matches TE's official numbering convention. That can cause schematic-to-harness wiring mistakes.
Low	Project uses a minimal connector symbol representation	Acceptable for a part project, but not ideal for documentation quality.

Bottom line Current status

Table

Area	Verdict
Core metadata	Good
MPN / family / orientation / pin count consistency	Good
Datasheet presence	Good
Electrical summary availability	Good
Symbol completeness	Needs improvement
Footprint manufacturability verification	Not fully completed from accessible data

Most important risk

The biggest unresolved issue is mechanical footprint verification. The part project has 26 pads, which is promising, but I could not retrieve enough dimensional detail from the current tool outputs to prove the land pattern matches TE's official product drawing.

Recommended fixes

Table

Priority	Fix
1	Verify the footprint against the TE product drawing JPN_CD_2-6437285-9_A.pdf or TE CAD model before manufacturing use
2	Add proper pin names/descriptions, or at minimum keep numbered positions but set pin type to Passive instead of Unspecified
3	Add/confirm the official cavity numbering view in the symbol documentation so users wire it correctly

If you want, I can do a follow-up pass focused specifically on:

pulling the TE drawing/CAD references into a tighter mechanical checklist, or
turning this into a concise QA report file for the part project.

Mechanical checklist report

Review symbol pin types

Check part reviews

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.2k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k