Part Verification and Datasheet Analysis

flux

Done. I reviewed the part project, used the existing official TE document set, and cross-checked what is currently defined in the part against the available manufacturer documentation.
1) Part information currently available in the project Project metadata summary

Table

FieldValue
MPN2-6437285-9
ManufacturerTE Connectivity
Part typeConnector
MountPCB mount
Description from project26-position, 4-row, horizontal/right-angle style connector, black, gold-plated, 1 mm system
Existing datasheet URLPDF
Schematic/symbol summary

Table

ItemObserved
Symbol pin count26
Pin numbering present1 to 26
Per-pin namesNot defined
Per-pin descriptionsNot defined
Pin electrical typeAll set to Unspecified
NetsNone defined
Footprint/layout summary

Table

ItemObserved
Footprint presentYes
Pad count26 pads
Pad numbering present1 to 26
Detailed pad geometry from layout APINot exposed in retrieved data
Stackup/rules in part projectNone returned
2) Datasheet property status
A datasheet URL was already set on the part, so no property update was required.
I also found the official TE product page and related official documents for this MPN:
3) Datasheet/document scan summary Identified part

Table

FieldValue
Official description1.0 mm Header, Superseal 1.0, 26 way, 2 key (4 row), black, 90° molded gold pins, PCB mount, double locking
Orientation90° / right angle
Positions26
Rows4
Keying type2 (4 row)
LockingDouble
Mating plug housing1-1447232-7
Mechanical/package metadata

Table

FieldValue
Connector styleHeader
MountingPCB mount
PCB terminationThrough Hole - Solder
Profile height from PCB21.4 mm
Connector length39.6 mm
Connector width23 mm
Pitch / centerline reported in accessible docs3 mm / 3.5 mm
Mounting holesWith
PCB mount alignmentWithout
PCB mount retentionWithout
Electrical characteristics found in accessible official docs

Table

ParameterValue
Voltage rating250 V AC, DC
Insulation resistance100 MΩ minimum
Dielectric withstanding1000 V AC or 1600 V DC for 1 minute between contacts and between contact and earth
Current ratingUp to 15 A
Operating temperature-40 °C to +125 °C
Materials / finish

Table

FieldValue
Contact materialBrass
Contact finish, mating partGold over Ni
Contact finish, soldering/crimp areaTin-lead over Ni or catalog variants note tin/tin-lead family differences
Housing materialPBT/PET
Environmental / special features

Table

FeatureValue
SealableYes
Ingress protectionIP67 for all versions, IP69K with backshell for flange and lever version
Keying / polarizationKeyed
LockingDouble locking
Vibration noteRandom vibration testing referenced in product spec 108-78140
Pin descriptions

Table

ItemResult
Individual functional pin namesNot found in accessible TE catalog/spec extracts
Cavity numbering map / viewed-from drawingNot retrieved from accessible extracts
Practical interpretationThis is a numbered connector; pins appear to be position numbers rather than function-specific signal names
Absolute maximum ratings

Table

ItemResult
Explicit "Absolute Maximum Ratings" tableNot found
That is normal for many connector documents: TE provides performance/specification data rather than IC-style absolute max tables.
4) Cross-check: symbol and footprint vs manufacturer docs What matches

Table

CheckResultNotes
MPNMatchProject MPN matches TE docs
Part familyMatchSUPERSEAL 1.0 header
Position countMatch26 positions in project and docs
Row countMatch4-row called out in docs
OrientationMatchRight-angle / 90° matches docs
Mounting styleMatchPCB mount, through-hole style matches docs
Pad/pin countMatch26 schematic pins and 26 footprint pads present
Flags and potential issues

Table

SeverityFindingWhy it matters
HighFootprint geometry could not be fully verified against the TE product drawingI could confirm pad count, but not the exact hole sizes, pad sizes, row spacing, or mechanical hole locations from the retrieved Flux/layout data. That means there is still a manufacturing-risk gap until the footprint is checked against JPN_CD_2-6437285-9_A.pdf or TE CAD.
MediumSymbol pins have no names/descriptions and all pin types are UnspecifiedThis will not usually break manufacturing, but it increases the chance of wiring mistakes and weak ERC behavior in downstream designs.
MediumNo retrieved cavity identification view from the manufacturer drawingThe project has numbered pins, but without the official cavity map/drawing view, I cannot confirm that the symbol's left/right visual arrangement matches TE's official numbering convention. That can cause schematic-to-harness wiring mistakes.
LowProject uses a minimal connector symbol representationAcceptable for a part project, but not ideal for documentation quality.
Bottom line Current status

Table

AreaVerdict
Core metadataGood
MPN / family / orientation / pin count consistencyGood
Datasheet presenceGood
Electrical summary availabilityGood
Symbol completenessNeeds improvement
Footprint manufacturability verificationNot fully completed from accessible data
Most important risk
The biggest unresolved issue is mechanical footprint verification. The part project has 26 pads, which is promising, but I could not retrieve enough dimensional detail from the current tool outputs to prove the land pattern matches TE's official product drawing.
Recommended fixes

Table

PriorityFix
1Verify the footprint against the TE product drawing JPN_CD_2-6437285-9_A.pdf or TE CAD model before manufacturing use
2Add proper pin names/descriptions, or at minimum keep numbered positions but set pin type to Passive instead of Unspecified
3Add/confirm the official cavity numbering view in the symbol documentation so users wire it correctly
If you want, I can do a follow-up pass focused specifically on:
  • pulling the TE drawing/CAD references into a tighter mechanical checklist, or
  • turning this into a concise QA report file for the part project.
Mechanical checklist report
Review symbol pin types
Check part reviews

To get started, talk to Flux or create a New Document.

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    kicad_mod

    2-6437285-9

    264372859.kicad_modFootprint
    stp

    2-6437285-9

    2-6437285-9.stp3D Model
    2-6437285-9-thumb.png

    2-6437285-9-thumb.png

    2-6437285-9-thumbThumbnail
    2-6437285-9

    2-6437285-9

    2-6437285-9 Symbol.svgDefault

    2-6437285-9

    2-6437285-9 thumbnail
    Connector Header Through Hole, Right Angle 26 position 0.039" (1.00mm) #CommonPartsLibrary #Connector #Superseal

    Properties

    2-6437285-9

    TE Connectivity

    Connectors

    te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=1-1773962-8&DocType=Data%20Sheet&DocLang=English&PartCntxt=2-6437285-9&DocFormat=pdf

    J

    PCB

    creativecommons.org/licenses/by/4.0/

    Pricing & Availability

    See prices from popular manufacturers for your project.

    Controls