Part Metadata Review and Validation
7:50
Project
BOM
File
PCB Layout
Schematic
Web
Considering.
Planning.
Using Schematic Tool.
Using BOM Tool.
Looking for "part description, ordering information, package style, and connector type" in 760500.pdf
Looking for "electrical characteristics" in 760500.pdf
Looking for "absolute maximum ratings" in 760500.pdf
Looking for "recommended operating conditions" in 760500.pdf
Looking for "pin descriptions or contact assignment" in 760500.pdf
Looking for "mechanical dimensions, PCB mounting dimensions, and package dimensions" in 760500.pdf
Looking for "special features, materials, impedance, frequency range, and VSWR" in 760500.pdf
Using PCB Layout Tool.
Running multiple web searches.
Found 1 results.
Found 1 results.
Running multiple web searches.
Running multiple web searches.
Found 1 results.
Looking for "mechanical drawing, materials, electrical specifications, pin assignment, package dimensions" in 132291-drawing.html
Looking for "part specifications and downloadable customer drawing PDF link" in 132291.html
Looking for "part specifications and downloadable customer drawing PDF link" in 132291.html
Looking for "recommended PCB mounting pattern hole locations and hole diameters" in 132291-drawing.html
Looking for "drawing notes including tolerance, panel thickness, and board mounting details" in 132291-drawing.html
Looking for "identify the center contact and outer mounting legs or shell connections from the drawing" in 132291-drawing.html
I reviewed the part project and completed the requested checks.
1) Current part/project information
| Field | Value |
|---|---|
| MPN | 132291 |
| Manufacturer | Amphenol |
| Project description | RF Connectors / Coaxial Connectors SMA STRAIGHT JACK PCB MOUNT BULKHEAD |
| Part type property | Connectors |
| Mount property | Axial |
| Schematic representation | 5 symbol terminals / 5 pins total |
| PCB representation | 5 pads total |
| Datasheet URL already set | Yes |
| Current datasheet URL | https://datasheet.datasheetarchive.com/originals/distributors/Datasheets-DGA15/760500.pdf |
No update was needed because a datasheet URL is already present on the part.
3) Datasheet scan summary
The archived PDF URL already set on the part was not machine-readable through the document scan path, so I used the official Amphenol product page and its customer drawing reference, plus the DigiKey-hosted rendering of the same customer drawing, to extract the part metadata.
3a) Official product metadata
| Category | Extracted data |
|---|---|
| Official description | SMA PCB Through Hole Straight Jack Bulkhead 50 Ohm |
| Status | Active |
| Connector type | SMA jack |
| Orientation | Straight |
| Mounting feature | Bulkhead - Rear Mount |
| Termination style | PCB - Through Hole |
| Contact termination | Solder |
| Coupling mechanism | Threaded |
| Impedance | 50 Ω |
| Max frequency | 18 GHz |
| Min temperature | -65 °C |
| Max temperature | 165 °C |
| Mating cycles | 500 min |
| Applications | High Frequency |
| Ports | 1 |
| Size category | Subminiature |
| Isolated | No |
| Low PIM | No |
| Non-magnetic | Contains Magnetic Materials |
| IP rating | Not Rated |
3b) Materials and finishes
| Item | Material | Finish |
|---|---|---|
| Body | Brass | Gold |
| Contact | Beryllium Copper | Gold |
| Insulator | Teflon / PTFE | Not stated |
| Lock washer | Brass | Gold |
| Hex nut | Brass | Not stated |
3c) Mechanical / package data from customer drawing
| Parameter | Value |
|---|---|
| Overall dimensions called out | 5.08 mm, 2.54 mm, 4.06 mm, 6.10 mm, 1.27 mm, 1.50 mm / 1.60 mm, 7.00 mm, 13.79 mm / 13.82 mm, 14.06 mm |
| PCB mounting hole callout | 1.93 mm [0.076 in] appears in the drawing extract |
| PCB pattern callout | TYP 3 [0.076] appears in the drawing extract |
| Panel thickness note | Extracted as T MAX PANEL THICKNESS: .75 mm |
| Package style | Bulkhead PCB mount SMA jack |
3d) Pin / contact interpretation
| Pining information | Result |
|---|---|
| Explicit pin table in datasheet | Not provided |
| Center conductor identification | Single middle PCB contact |
| Outer connections | Four outer mounting legs / shell connections |
| Functional interpretation | 1 RF signal contact + 4 shield/body ground/mechanical contacts |
3e) Absolute maximum ratings / recommended operating conditions / electrical tables
| Section | Result |
|---|---|
| Absolute Maximum Ratings | Not present in the retrieved customer drawing extract |
| Recommended Operating Conditions | Not present as a separate table |
| Electrical characteristics table | No formal table found; key electrical specs explicitly found were 50 Ω impedance, 18 GHz max frequency, -65 °C to 165 °C operating temperature range |
| Special features | Bulkhead rear mount, through-hole PCB termination, threaded coupling, gold-plated body/contact, PTFE insulator |
Findings
| Check | Status | Risk |
|---|---|---|
| Pin count: schematic vs footprint | Pass | Both show 5 connections/pads |
| Basic package style vs project description | Pass | Bulkhead / SMA / PCB through-hole aligns with retrieved data |
| Datasheet presence | Pass | Datasheet URL exists |
| Pin names / functional pin descriptions | Fail | Current symbol pins are effectively anonymous |
| Pin electrical types | Fail | All pins are Unspecified |
| Signal vs shield distinction | Fail | The symbol does not distinguish the center RF pin from the 4 shell/ground pins |
| Ordering / package metadata completeness | Partial | Project mount property says Axial, which does not match the retrieved product style well |
| Manufacturing footprint verification | Partial / Needs manual geometry check | I could confirm 5 pads exist, but not all exact hole diameters/XY geometry from the Flux footprint object dump |
- Highest risk: the symbol does not clearly identify which single pin is the RF center conductor and which four are shield/body ground tabs.
- This can cause incorrect schematic usage, wrong net assignments, and RF/grounding mistakes.
- High risk: all pins are marked Unspecified.
- For a connector part, the center contact should be treated as the RF/signal contact, while the outer tabs should be ground/shield/mechanical shell connections.
- Medium risk: the project property Mount = Axial does not appear consistent with the official part description, which is bulkhead rear-mount, straight, PCB through-hole SMA jack.
- That can lead to bad filtering/searching and possible ordering confusion.
- Medium risk: the current part data does not include a clear footprint metadata label like a package name or mounting pattern identifier.
- Open item: the footprint has the correct pad count, but I could not fully verify exact drill diameters and pad coordinates against the customer drawing from the current PCB object dump alone.
Recommended corrections
| Priority | Correction |
|---|---|
| 1 | Name the pins so the center pin is clearly the RF signal contact and the other 4 pins are shell/ground tabs |
| 2 | Set correct pin electrical types instead of Unspecified |
| 3 | Update the generic mount/property wording so it matches the official product description |
| 4 | Manually verify the footprint drill sizes and XY locations against the customer drawing before using this part in manufacturing |
- The part project is not yet safe as-is for production library use.
- The biggest issue is symbol semantics, not pad count.
- I do not see evidence of a catastrophic pin-count mismatch, but I do see enough ambiguity to cause wrong net assignment, poor RF grounding, or incorrect library reuse.
If you want, I can next check whether I’m able to fix the part metadata and pin properties for you automatically.
Check exact footprint
Review part issues
Find datasheet URL
6 days
Ready.
Reviews
- Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portaljharwinbarrozo43.0M
- Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #powerjharwinbarrozo11.4M
- A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #genericsjharwinbarrozo15.5k
- An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.Terminal
- 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlinkjharwinbarrozo1.2M
- 10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcanjharwinbarrozo1.2M
- Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlinkjharwinbarrozo1.1M
SMA Connector Jack, Female Socket 50 Ohms Panel Mount, Through Hole Solder #CommonPartsLibrary #Connector #1322
Pricing & Availability
See prices from popular manufacturers for your project.
Assets
kicad_mod
132291
132291.kicad_modFootprint
132291
132291 Symbol.svgDefault132291
132291.stp3D Model
132291-thumb.png
132291-thumbThumbnailControls
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.