ESP32 Automation PCB Design
Adding CH 1–4 silkscreen labels...
0:34
Autopilot
Started: Change the project to add silkscreen text “CH 1”, “CH 2”, “CH 3”, and “CH 4” alongside the ESP32 header terminals
13 days
Placing STEPPER silkscreen label...
0:32
Autopilot
Started: Place the silkscreen label “STEPPER” adjacent to the A4988 socket (U2)
13 days
Executing autoroute between ESP32 and A4988...
1:05
Autopilot
Started: Execute autorouting to connect the ESP32 headers and the A4988 socket
13 days
Positioning ESP32 headers at 27.94 mm spacing...
0:30
Autopilot
Started: Change project to set J10 and J11 positions: align both 1×15 ESP32 headers parallel, center-to-center spacing of exactly 27.94 mm, and lock their positions
13 days
Setting 12V net trace width...
0:31
Autopilot
Started: Change project to set trace width rule for the 12V net to 1.0 mm
13 days
Worked
0:22
Autopilot
13 days
0:00
Autopilot
I wasn’t able to apply any of the requested changes automatically.
Remaining tasks:
- Precisely position the two ESP32 headers (J10, J11) at a 27.94 mm center-to-center spacing and lock their placement.
- Set the trace width rule for the 12V net to 1.0 mm.
- Set the trace width rule for the GND net to 1.0 mm.
- Add silkscreen labels “CH 1”, “CH 2”, “CH 3”, “CH 4” at the ESP32 header terminals.
- Add a silkscreen label “STEPPER” adjacent to the A4988 socket (U2).
- Run a DRC before routing to catch violations.
- Execute autorouting between the ESP32 headers and the A4988 socket.
- Run a post-routing DRC to verify no violations.
None of the success criteria have been met yet. Next, you’ll need to make these adjustments inside Flux or grant edit access so they can be applied.
13 days
Cannot run plan.
Show Plan
U2 ~ENABLE - U1 24
GND
GND
U2 DIR - U1 22
GND
D1
R3
Resistance
10k Ω
U2 DIR - U1 22
Q4 G - U1 27
U2 MS1 - U1 21
R1
Resistance
10k Ω
D2
U3 VIN - J5 1
Q3 G - U1 14
D3
R4
Resistance
10k Ω
U2 MS2 - U1 18
Q4 G - U1 27
U2 MS3 - U1 17
Q3 G - U1 14
GND
J4
U3 OUT - U1 2
Q3
U3 OUT - U1 2
Q1 G - U1 13
U2 MS2 - U1 18
Q2 G - U1 12
R5
Resistance
10k Ω
U2 STEP - U1 23
D4
U2
U2 ~RESET - U1 30
Q4
GND
U2 ~RESET - U1 30
Q2
U2 ~ENABLE - U1 24
U3 OUT - U1 2
Q1
Q2 G - U1 12
R2
Resistance
10k Ω
Reviews
Electrical Rule Checks
Duplicate Designators
Reports components with identical designators.
No-Connect Violation
Reports no-connect pins that are connected.
Pin-to-Pin Conflicts
Reports incompatible pin connections on the same net based on electrical pin types.
Shorted Components
Reports any 2-pin component with both pins connected to the same net.
Missing Power • 2
Single Pin Nets
Reports nets that have only one pin connected.
Missing Designator
Reports components without a designator.
Design Rule Checks
Overlapping Copper • 1
Des | Net | Des | Net | ... | |
|---|---|---|---|---|---|
Invalid Layer
Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.
Component Overrides
Reports components that have been modified using the "!important" flag.
Airwires
Reports missing routed traces between pads in a net.
Layers with Multiple Fills
Reports layers that have multiple copper fills of different nets. Make sure the Connected Layers rule value of nets with fills is valid.
Floating Copper
Detect any via, trace or copper fill island that is not connected to any net.
Protected Intrusions
Reports intrusions from objects of other nets into polygons or fills that have the Protected layout rule applied.
Missing Footprints
Reports components that need a footprint but don't have one.
System Checks
Auto-Layout
BetaReports issues with Auto-Layout if Flux cannot route something or must ignore a configuration.
Passive Components
Resistor Power Rating
BetaChecks that the power traveling across a given resistor is under its rating with 50% headroom.
Learn morePull Up/Pull Down Presence
BetaChecks that IC pins that require pull up or pull down resistors have them.
Learn moreCapacitor Voltage Rating
BetaChecks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.
- Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portaljharwinbarrozo43.0M
- Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #powerjharwinbarrozo11.4M
- A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #genericsjharwinbarrozo15.2k
- An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.Terminal
- 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlinkjharwinbarrozo1.2M
- 10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcanjharwinbarrozo1.2M
- Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlinkjharwinbarrozo1.1M
Inspect
Continuous Fuchsia P.K.E. Meter
Controls
Properties
Net Type: 5V
Power
Net Type: GND
Ground
Net Type: MS1
Low Speed
Net Type: MS2
Low Speed
Net Type: GPIO27
Low Speed
Net Type: STEP
Low Speed
Net Type: 3.3V
Power
Net Type: MS3
Low Speed
Net Type: GPIO14
Low Speed
Net Type: DIR
Low Speed
Net Type: GPIO12
Low Speed
Net Type: 12V
Power
Net Type: RESET
Low Speed
Net Type: GPIO13
Low Speed
Net Type: ENABLE
Low Speed
Availability & Pricing
| Distributor | Qty 1 | |
|---|---|---|
| Arrow | $1.71–$6.43 | |
| Digi-Key | $7.50–$8.37 | |
| LCSC | $3.32–$5.39 | |
| Mouser | $7.43 | |
| TME | $8.64 | |
| Verical | $1.80–$21.88 | |
Assets
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.