ESP32 and MPU6500 Circuit Design

tiagomastercampo

Let’s accept 4x4x2.0mm. @library find 2.2uH shielded inductors, Isat ≥2A, DCR ≤40mΩ, 4020 footprint.

34 days

flux

5:17

Chat History

Project

Library

Preparing knowledge queries.

Setting up library queries.

Using Knowledge Base Tool.

Searching for a component.

Dispatching Library tool to find: "Shielded inductor 2.2uH 4020 4.0x4.0x2.0 mm Isat >= 2A DCR <= 0.04 ohm, for non-inverting buck-boost around 1.5 MHz (TPS63001)"

Creating search plan for: "Shielded inductor 2.2uH 4020 4.0x4.0x2.0 mm Isat >= 2A DCR <= 0.04 ohm, for non-inverting buck-boost around 1.5 MHz (TPS63001)"

Searching.

Found 17 results.

Searching: "Shielded inductor 2.2uH 4020 4.0x4.0x2.0 mm Isat >= 2A DCR <= 0.04 ohm, for non-inverting buck-boost around 1.5 MHz (TPS63001)"

Searching.

Found 19 results.

Searching: "Shielded inductor 2.2uH 4020 4.0x4.0x2.0 mm Isat >= 2A DCR <= 0.04 ohm, for non-inverting buck-boost around 1.5 MHz (TPS63001)"

Finished searching for a component.

Searching for components.

Dispatching Library tool to find: "2.2uH shielded inductor 4020 4.0x4.0x2.0 mm Isat >= 2A DCR <= 0.04 ohm"

Dispatching Library tool to find: "4020 2R2 shielded power inductor low DCR 40mOhm max Isat 2A min"

Dispatching Library tool to find: "4.0x4.0x2.0 mm shielded inductor 2.2 uH for buck-boost TPS63001 1.5 MHz"

Creating search plan for: "2.2uH shielded inductor 4020 4.0x4.0x2.0 mm Isat >= 2A DCR <= 0.04 ohm"

Creating search plan for: "4020 2R2 shielded power inductor low DCR 40mOhm max Isat 2A min"

Creating search plan for: "4.0x4.0x2.0 mm shielded inductor 2.2 uH for buck-boost TPS63001 1.5 MHz"

Searching.

Found 38 results.

Searching: "4020 2R2 shielded power inductor low DCR 40mOhm max Isat 2A min"

Searching.

Found 16 results.

Searching: "2.2uH shielded inductor 4020 4.0x4.0x2.0 mm Isat >= 2A DCR <= 0.04 ohm"

Searching.

Found 20 results.

Searching: "4.0x4.0x2.0 mm shielded inductor 2.2 uH for buck-boost TPS63001 1.5 MHz"

Searching.

Found 16 results.

Searching: "2.2uH shielded inductor 4020 4.0x4.0x2.0 mm Isat >= 2A DCR <= 0.04 ohm"

Searching.

Found 32 results.

Searching: "4020 2R2 shielded power inductor low DCR 40mOhm max Isat 2A min"

Finished searching for components.

Searching for components.

Dispatching Library tool to find: "SMNR4020 2.2uH shielded inductor"

Dispatching Library tool to find: "SRN4020 2R2 shielded inductor 4x4x2.0mm"

Dispatching Library tool to find: "VLS4020 2R2 shielded inductor 4.0x4.0x2.0mm 2A"

Creating search plan for: "SMNR4020 2.2uH shielded inductor"

Creating search plan for: "SRN4020 2R2 shielded inductor 4x4x2.0mm"

Creating search plan for: "VLS4020 2R2 shielded inductor 4.0x4.0x2.0mm 2A"

Searching.

Found 18 results.

Searching: "VLS4020 2R2 shielded inductor 4.0x4.0x2.0mm 2A"

Found 20 results.

Searching: "SMNR4020 2.2uH shielded inductor"

Found 20 results.

Searching: "SRN4020 2R2 shielded inductor 4x4x2.0mm"

Searching.

Found 15 results.

Searching: "VLS4020 2R2 shielded inductor 4.0x4.0x2.0mm 2A"

Finished searching for components.

Searching for a component.

Searching.

Finished searching for a component.

Linking inductor results.

Here are compact 4020 (4.0 x 4.0 x 2.0 mm class) 2.2 uH shielded inductor options that match your constraints (Isat ≥ 2 A, DCR ≤ 40 mΩ). I will verify exact DCR/Isat from datasheets once you pick one.

Candidates

Table

Part	Notes
SMNR4020-2.2UH	2.2 uH, 4020 footprint, power inductor. Meets your target class; we will confirm DCR ≤ 40 mΩ and Isat ≥ 2 A from the datasheet.
SRP4020TA-2R2M	Bourns shielded 4020 series. Close mechanical match; we will confirm DCR/Isat against your thresholds.

Which one would you like to use? If you choose one, I’ll pull the datasheet to confirm specs and then add it with the TPS63001 BOM and wiring.

Pick SRP4020TA option

Verify footprint dimensions

Broaden library search

Check inductor sizing vs load

Compare two candidates

34 days

Ready to start.

Show Plan

SCL/SCLK

3V3

INT

IC1

Not Recommended for New Designs

ESD

Capacitance

0.1u F

3V3

FSYNC

SDA/SDI

Resistance

10K Ω

Resistance

10K Ω

3V3

ESC

Resistance

10K Ω

Capacitance

0.1u F

ESD

Capacitance

0.1u F

AD0

3V3

Resistance

10K Ω

Resistance

10K Ω

Reviews

Electrical Rule Checks

Duplicate Designators

Reports components with identical designators.

No-Connect Violation

Reports no-connect pins that are connected.

Pin-to-Pin Conflicts

Reports incompatible pin connections on the same net based on electrical pin types.

Shorted Components

Reports any 2-pin component with both pins connected to the same net.

Missing Power

Reports power input pins that are not connected to a power source.

Single Pin Nets

Reports nets that have only one pin connected.

Missing Designator

Reports components without a designator.

Design Rule Checks

Overlapping Copper • 1

	Des	Net	Des	Net	...
	IC1:25	None	Trace c74d	GND

Reports copper elements that are shorting.

Invalid Layer

Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.

Component Overrides • 9

	Designator	Ruleset
	＊｀REF｀＊	C2
	＊｀REF｀＊	C1
	＊｀REF｀＊	R4
	＊｀REF｀＊	R1
	＊｀REF｀＊	R2
	＊｀REF｀＊	R3
	＊｀REF｀＊	IC1
	＊｀REF｀＊	R5
	＊｀REF｀＊	C3

Reports components that have been modified using the "!important" flag.

Airwires

Reports missing routed traces between pads in a net.

Layers with Multiple Fills

Reports layers that have multiple copper fills of different nets. Make sure the Connected Layers rule value of nets with fills is valid.

Floating Copper

Detect any via, trace or copper fill island that is not connected to any net.

Protected Intrusions

Reports intrusions from objects of other nets into polygons or fills that have the Protected layout rule applied.

Missing Footprints

Reports components that need a footprint but don't have one.

Manufacturing

Manufacturer Part Number • 9

	Designator	MPN
	C1	None
	C2	None
	C3	None
	J1	None
	R1	None
	R2	None
	R3	None
	R4	None
	R5	None

Reports components that have no manufacturer part number.

Parts Available

Beta

Checks that all components are available from distributors.

System Checks

Auto-Layout

Beta

Reports issues with Auto-Layout if Flux cannot route something or must ignore a configuration.

Passive Components

Resistor Power Rating

Beta

Checks that the power traveling across a given resistor is under its rating with 50% headroom.

Learn more

Pull Up/Pull Down Presence

Beta

Checks that IC pins that require pull up or pull down resistors have them.

Learn more

Capacitor Voltage Rating

Beta

Checks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
jharwinbarrozo
15.4k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Inspect

MPU-6500 Reference Design

Controls

Properties

License

https://creativecommons.org/licenses/by/4.0/

Availability & Pricing

Distributor		Qty 1
	LCSC	$2.35
	Mouser	$8.70

Assets

Thumbnail

MPU-6500 Reference Design.png

id=MPU-6500 Reference Design

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

vasyl / MPU-6500 Reference Design

Schematic