Schematic for example stm32l0 board: Development board based on...

PCB Flux Project Help

pcbfluxer

169 days

flux

0:42

General (prev)

Project

Hello! How can I help you with your Flux project today?

169 days

Ready.

please explain what J6 does.

liangxhao

@copilot please explain what J6 does.

copilot

The J6 designator in your project refers to a connector part used for interfacing various signals and power lines. Based on the description and the members connected to the nets, J6 is a multi-purpose connector with numerous pins, each serving different functions. Here’s a breakdown of J6’s role based on the pin connections:

Data Signals for USB Interface:
- USB Data Lines: Pins D1+ (pin 24) and D1- (pin 23), and D2+ (pin 22) and D2- (pin 21) are likely used for USB data transmission. These pins are connected to the net with pins labeled USB_D+ and USB_D-, indicating differential data lines for USB communication.
- The connection to U1:PA11 and U1:PA12 for USB_D- and USB_D+ suggests this part of the connector is interfaced with a USB peripheral on the STM32L0 MCU (U1), facilitating USB communication.
Power Delivery (VBUS) Pins: Pins VBUS1 (pin 28), VBUS2 (pin 27), VBUS3 (pin 26), and VBUS4 (pin 25) are connected to the VIN power net. This indicates these pins are likely used for power delivery, connecting external power sources to the board.
Ground (GND) Pins: Several pins (pin 17, pin 18, pin 19, and pin 20) are dedicated GND (ground) connections. This is typical for providing multiple ground points to improve grounding and reduce noise in the circuit.
Shield Ground Pins: Pins labeled with "SHIELD" and numbers (pins 13, 14, 15, 16) are also connected to ground. These are possibly for shielding purposes, offering a ground reference for shielded cables connected to J6, further helping with electromagnetic interference (EMI) reduction.
Side Band Use (SBU) and Configuration Channel (CC) pins: Pins like SBU1 (pin 7), SBU2 (pin 8), CC1 (pin 5), and CC2 (pin 6) indicate use in applications needing additional, or configuration-related signals, possibly related to USB Type-C or other multifunctional interface specifications.
Differential Pair Pins for High-Speed Data: Pins like TX1+, TX1-, TX2+, TX2-, RX1+, RX1-, RX2+, and RX2- may be used for differential signaling, useful in high-speed data transfer applications. These could be employed, for instance, in high-speed USB, HDMI, or other digital interfaces requiring differential pairs.

Overall, J6 appears to be a versatile, multifunction connector that handles power input, grounding, USB communication, and possibly other high-speed data interfaces. Its exact usage would depend on how the connected nets and their signals are intended to be used in the larger context of the project's design goals. Given it's made by Molex (a reputable manufacturer known for high-quality connectors), J6 likely supports robust connectivity options for the development board.

Someone is typing...

please explain what J6 does.

siheng

@copilot please explain what J6 does.

copilot

Designator J6 is a USB Type-C Connector manufactured by Molex. It has multiple pins for different functionalities:

D1+ and D2+ are used for USB data transmission (USB_D+).
D1- and D2- are also used for USB data transmission (USB_D-).
CC1 and CC2 are the Channel Configuration pins used to identify the cable orientation and establish the role of the source and device.
VBUS1 up to VBUS4 are the power pins providing the source voltage (often 5V in standard USB applications, noted as VIN in your project).
GND1 up to GND4 and SHIELD up to SHIELD__3 are the ground pins, providing a common reference for the voltage in the circuit (noted as GND in your project).
The SBU1 and SBU2 (Sideband Use) pins, TX and RX pins are for alternate modes, such as DisplayPort, HDMI, etc.
The rest of the pins are not connected in your design.

In your project, this connector is likely used for power input (through the VBUS pins), ground reference, and data communication between the STM32L0 development board and an external device (like a computer). The specifics depend on how these pins are connected to other components in your circuit.

Someone is typing...

list all ICs and the decoupling capacitors attached to each. Ensure to include a...

miranda309302

@copilot list all ICs and the decoupling capacitors attached to each. Ensure to include all ICs present in the design, including digital ICs, power converters, LDOs, etc. For every IC, clearly state:

What power net the decoupling capacitors are attached to. What is the stated voltage of that net.
The voltage rating and value of the attached decoupling capacitors.
Signal with the expression “[WARNING]” if any of the following conditions are met: no decoupling capacitors are attached; the voltage of the power net is higher than the voltage rating of the capacitor; No voltage range was stated for the capacitor. Give a separate “[WARNING]” for each condition. Signal with the expression “[OK]” if none of those conditions are met
Express the result in a markdown-formatted table

Someone is typing...

explain this project.

shankar26

@copilot explain this project.

copilot

Sure, let's break down your project, which is a development board based on the STM32L0 microcontroller family. Here are the key elements and components of your project:

Overview

STM32L0 Microcontroller:
- The central component (U1: STM32L053R8T6) is an ultra-low-power ARM Cortex-M0+ MCU by STMicroelectronics.
- Connected peripherals include various sensors, LEDs, and power management components.

Key Components

Microcontroller:
- STM32L053R8T6 (U1): Provides several I/O pins (PAx, PBx, PCx, etc.), power supply pins (VDD, VDD_USB, VDDA, etc.), and other essential function pins (NRST, BOOT0).
Sensors:
- VL53L1CXV0FY/1 (U3): A time-of-flight sensor from STMicroelectronics.
Microphone:
- MP34DT06JTR (M1): A MEMS microphone by STMicroelectronics.
LED Indication:
- LEDs (LED2, G_LED, B_LED, R_LED): Dual/multi-color LEDs for indicating various states.
Power Management:
- AP2112K-3.3TRG1 (U2): A low dropout (LDO) regulator to supply 3.3V.
- VIN and 3V3: Various power nets for different supply voltages.
- Decoupling Capacitors (C1, C2, C11, C12): Capacitors to stabilize voltage supplies.
Connectors:
- J1, J2, J3: Connectors for interfacing with external components and programming/debugging.

Key Nets and Connections

Power Connections:
- Connect U2 to VIN.
- Connect U2 to the 3.3V power net (3V3).
- Multiple GND connections such as U1, U2, and other components' grounds.
I2C Connections:
- Connect U1 to U3, ensuring I2C clock signal.
- Connect U1 to U3 for I2C data.
Other Key Signals:
- USB_D :P1 and USB_D-:P1: For USB data connections.
- Digital and analog I/O pins such as U1, U1, etc., connected to other components.

Functional Description

The STM32L053R8T6 microcontroller serves as the brain, controlling all peripherals and handling data processing tasks.
Power Management:
- The AP2112K LDO regulator ensures a stable 3.3V supply to all necessary components.
- Decoupling capacitors stabilize power supply lines, reducing any noise/interference.
Sensor Interface:
- The VL53L1CX sensor communicates with the MCU over the I2C bus for distance measurements.
- The MEMS microphone captures audio signals to be processed by the MCU.

Assumptions

Sensors and LEDs Interface: I assumed the specific interface (I2C) for the VL53L1CX, and general purpose I/O for LEDs.
Power Connections: Typical voltage levels and power distribution conventions are followed.
Decoupling Requirements: Standard decoupling capacitor values for LDO regulation are used.

If there are any specific details or clarifications needed, feel free to ask!

Someone is typing...

list all U1 pins in a table format. For each pin provide its pin number, pin nam...

kalijana

@copilot list all U1 pins in a table format. For each pin provide its pin number, pin name and function.

copilot

I'm sorry, but unfortunately, I don't have any datasheet excerpts available for the STM32L053R8T6 that includes pin functions. For that reason, I can't provide the requested table with specific pin functions. Here is the list of pin numbers and names from the information I currently have:

Table

Pin Number	Pin Name
1	VLCD
2	PC13
3	PC14
4	PC15
5	PH0
6	PH1
7	NRST
8	PC0
9	PC1
10	PC2
11	PC3
12	VSSA
13	VDDA
14	PA0
15	PA1
16	PA2
17	PA3
18	VSS
19	VDD
20	PA4
21	PA5
22	PA6
23	PA7
24	PC4
25	PC5
26	PB0
27	PB1
28	PB2
29	PB10
30	PB11
31	VSS
32	VDD
33	PB12
34	PB13
35	PB14
36	PB15
37	PC6
38	PC7
39	PC8
40	PC9
41	PA8
42	PA9
43	PA10
44	PA11
45	PA12
46	PA13
47	VSS
48	VDD_USB
49	PA14
50	PA15
51	PC10
52	PC11
53	PC12
54	PD2
55	PB3
56	PB4
57	PB5
58	PB6
59	PB7
60	BOOT0
61	PB8
62	PB9
63	VSS
64	VDD

Please refer to the STM32L053R8T6 datasheet for specific pin functions.

Someone is typing...

where are decoupling capacitors?

bbayrm

@copilot where are decoupling capacitors?

copilot

In your design, there are four capacitors (C1, C2, C11, C12) present, which could function as decoupling capacitors, depending on how they are interconnected in your circuit. However, without a specific mention of their use as decoupling capacitors in the text, it is difficult to confirm their exact role. Ideally, decoupling capacitors are placed as close as possible to the power supply pins of the ICs.

Here's where these capacitors are connected:

C1 is connected to GND and 3V3.
C2 is connected to GND and VIN.
C11 is connected to GND and 3V3.
C12 is connected to GND and 3V3.

These capacitors appear to be connected in a typical decoupling configuration. Decoupling capacitors are commonly connected between a power and ground net, which matches the configuration of these capacitors. Note that I'm making the assumption that they are used as decoupling capacitors due to their typical connection.

If these capacitors are indeed meant for decoupling, C1, C11, and C12 are decoupling the 3.3V supply, and C2 is decoupling the VIN supply.

Remember to place these capacitors as close to the power supply pins as possible for the best decoupling performance.

Someone is typing...

create a high level mermaid block diagram of this project. Include key component...

shankar26

@copilot create a high level mermaid block diagram of this project. Include key component's manufacturer part number in each block whenever possible.

copilot

Sure, here is a high-level mermaid block diagram of your project, including key components and their manufacturer part numbers:

Image

Someone is typing...

can u design stm32 mcu pcb board

girisht

@copilot can u design stm32 mcu pcb board

copilot

Sure, I can help you design an STM32 MCU PCB. Let's break down the process into specific steps:

Component Selection and Placement
Power Supply Circuit
Clock Circuit (if needed)
Reset Circuit
Peripheral Connections (e.g., UART, I2C, SPI, ADC)
Programming Interface (SWD)
Misc. Components (e.g., LEDs, Buttons)

Step-by-Step Design Process: 1. Component Selection and Placement

MCU: STM32L0 (e.g., STM32L053R8T6 - U1)
Power Regulator: AP2112K-3.3TRG1 (U2)
Capacitors: 10µF decoupling capacitors (C1, C2, C12)
Resistors: 10kΩ, 220Ω (R1, R2, R3, R9, R10)
Connectors: Headers for SWD, UART, etc. (J1, J2, J3, J6)
Others: LEDs (R_LED, G_LED, B_LED)

2. Power Supply Circuit

VIN: Primary power input (usually 5V)
3V3: Regulated 3.3V output

Connect as follows:

Connect VIN to U2:VIN.
Connect U2:VOUT to 3V3.
Connect U2:EN to VIN (to enable the regulator).
Place decoupling capacitors close to the MCU's power pins (C1, C2, C12).

3. Clock Circuit

Depending on your application, you may need an external crystal or can use the internal clock.

4. Reset Circuit

Usually, a pull-up resistor (10kΩ) to 3.3V and a reset button.

Connect U1:NRST to 3V3 via a 10kΩ resistor (R1).
Connect a button from U1:NRST to GND for manual reset.

5. Peripheral Connections

For I2C:

Connect U1:PB7 to U3:SDA (VL53L1CX).
Connect U1:PB6 to U3:SCL.

For UART:

Assign PA2 (TX) and PA3 (RX).

6. Programming Interface (SWD)

SWDIO: Connect U1:PA13 to J1:Pin_1.
SWCLK: Connect U1:PA14 to J1:Pin_3.
Connect GND and 3V3 to corresponding connector pins.

7. Misc. Components

LEDs: Connect cathode to a GPIO and anode through a current-limiting resistor to 3V3.
- Example: Connect R_LED to U1:PC15 via R9.

Let's define and connect specific nets based on the provided list:

Connections

Power Supply:
- Connect VIN:P1 to U2:VIN and U2:EN.
- Connect U2:VOUT to 3V3:P1.
- Connect capacitors C1, C2, C12 in parallel close to U1:VDD pins.
MCU Pins:
- Connect U1:PA13 to J1:Pin_1 (SWDIO).
- Connect U1:PA14 to J1:Pin_3 (SWCLK).
- Connect U1:PB7 to U3:SDA.
- Connect U1:PB6 to U3:SCL.
- Connect U1:PA2 to UART_TX.
- Connect U1:PA3 to UART_RX.
- Connect U1:PA15 to J3:Pin_12.
- Connect U1:PC10 to J3:Pin_11.
- Connect U1:PA9 to J2:Pin_11.
- Connect U1:PA8 to J2:Pin_10.
- Connect U1:PC8 to J2:Pin_8.
- Connect U1:PC9 to J2:Pin_9.
- Connect U1:PA10 to J2:Pin_12.
- Connect U1:PA0 to J2:Pin_4.
- Connect U1:PB3 to J3:Pin_8.
I2C Connection:
- Connect U3:SDA to U1:PB7 and I2C_SDA:P1.
- Connect U3:SCL to U1:PB6 and I2C_SCL:P1.
LED Connections:
- Connect R_LED to U1:PC15 via R9.
- Connect G_LED to U1:PC14 via R2.
- Connect B_LED to U1:PC13 via R10.

Schematic Creation:

You can now put these connections into Flux along with necessary symbols and footprints.

Next Steps

Place Components: Start by placing the MCU (U1) centrally. Add connectors, LEDs, and other components around it meaningfully.
Route Connections: Use the routing tool to make the connections as described above.
Power and Ground Planes: Include power and ground planes for stability.
Verification: Double-check connections, especially for power, reset, and SWD.

Sample Net Connections

Markdown
- Connect R1:1 to 3V3:P1.
- Connect R1:2 to NRST:P1.
- Connect R9:2 to R_LED:P1.
- Connect R10:2 to B_LED:P1.
- Connect U3:SDA to I2C_SDA:P1, PB7:P1.

Other possible connections are provided above.

Let me know if you need further instructions!

Someone is typing...

how do I use Flux?

liangxhao

@copilot how do I use Flux?

copilot

Using Flux, the browser-based electronics CAD program, involves several steps to design electrical schematics and lay out PCBs. Here’s a brief overview of how to get started:

Access Flux: Open your web browser and go to the Flux website. Create an account or log in to your existing account.
Start a New Project: Once logged in, you can start a new project by selecting the option to create a new schematic or PCB layout.
Design Your Schematic:
- Place Components: In the schematic editor, you can place components by dragging them from the library onto your canvas. You can search for specific components in the library.
- Make Connections: Use wires to connect the components. Each wire represents an electrical connection between components.
- Define Net Names: For easier reference, you can name different parts of your circuit (nets). This is especially helpful for complex designs.
Layout Your PCB:
- Once your schematic is complete, you can switch to the PCB layout view. Flux will transfer your schematic into a board layout, where you can place components physically.
- Arrange Components: Move the components around the board to find an efficient layout that minimizes wire lengths and avoids interference.
- Route Traces: Connect the pins of your components with traces. You can use auto-routing features or manually route for better control.
Inspect and Export: Use the design rule check (DRC) to inspect your design for common errors. When satisfied, you can export your design in various formats for manufacturing or further analysis.

For more detailed guides and tutorials on using Flux, including your first project:

First Project in Flux & Tutorials: Refer to the tutorials and guides for an in-depth explanation of each feature[1].
Video Tutorials: Explore the library of video tutorials on Flux's YouTube channel for visual learning[2].
Join the Community: For direct support and to engage with other users, join the Flux Slack community[3].

Remember, practice is key to mastering any tool, and Flux is designed to be intuitive for both beginners and experienced users. Don't hesitate to dive into the documentation and tutorials to enhance your learning process.

[1] https://docs.flux.ai/introduction

[2] https://docs.flux.ai/Introduction/upverter-to-flux

[3] https://docs.flux.ai/Introduction/getting-support

Someone is typing...

why is this capacitor here

joskrsul

connect this

akash347

@copilot why is this capacitor here

copilot

The closest capacitor to the chat thread schematic position (621, 568) is C2. It's a non-polarized capacitor with a capacitance of 10uF.

In general, capacitors in electronic circuits can serve numerous functions such as filtering, decoupling, and energy storage.

This capacitor (C2) most likely serves as a decoupling capacitor. Decoupling capacitors are used to filter out voltage spikes and prevent them from negatively impacting the rest of the circuit. They are typically placed close to the power supply pins of integrated circuits (ICs), in this case, the AP2112K-3.3TRG1 IC (U2).

The capacitor helps to maintain a steady voltage level across the IC by supplying current to the IC during sudden changes in demand. This helps to stabilize the power supply and prevent transient voltage spikes that could potentially damage the IC or cause it to malfunction.

Someone is typing...

wheres code for this

tomas1251

Como funciona

sudarshan

wheres code for this

Someone is typing...

create a high level mermaid block diagram of this project. Include key component...

crazychel

@copilot create a high level mermaid block diagram of this project. Include key component's manufacturer part number in each block whenever possible.

copilot

Thinking...

Someone is typing...

please explain what U3 does.

amirbr

@copilot please explain what U3 does.

copilot

The component U3 in your project is a VL53L1CXV0FY/1 by STMicroelectronics. This is a Time-of-Flight (ToF) distance sensor. It uses ST's FlightSense technology to measure distances to objects up to 4 meters away with high accuracy and speed.

Here's an overview of its function:

Time-of-Flight Technology: It calculates the distance by measuring the time taken by a light pulse to travel to the target and back.
High Precision and Accuracy: Offers precise distance measurements, which are useful in applications like gesture recognition, proximity sensing, and robotics.
Compact and Power-Efficient: Designed for minimal power consumption, making it suitable for battery-powered devices.

If you’re integrating this component, you’ll likely connect it to your microcontroller via I2C, utilizing the SDA and SCL pins for data communication.

Let me know if you need further assistance with its connections or configuration!

By the way, would you like to proceed with integrating this sensor into your schematic with specific connections? I can help outline the necessary connections for you.

Someone is typing...

please explain what J6 does.

liangxhao

@copilot please explain what J6 does.

copilot

J6 in your design is a fairly complex connector with various functions, based on its pin assignments. It's specified with the manufacturer part number 2012670005 from Molex. This specific connector incorporates a plethora of signal types spanning from USB data lines to power and other communication interfaces. Here's a breakdown of J6's functionality based on the pin assignments provided:

USB Data Lines: It includes USB data lines D1+ (pin 24), D1- (pin 23), D2+ (pin 22), D2- (pin 21). These lines are used for USB communication, facilitating data transfer between devices.
Power Lines (VBUS): It has multiple VBUS pins (pins 25, 26, 27, 28) which are used to provide power to connected devices through the USB interface.
Ground Lines: It features multiple ground lines (pins 17, 18, 19, 20) for common grounding with connected devices, which is essential for proper operation of electronic circuits.
Differential Signal Pairs for USB 3.0 or Alternate Modes:
- TX1+ (pin 1) and TX1- (pin 2)
- TX2+ (pin 3) and TX2- (pin 4)
- RX1+ (pin 9) and RX1- (pin 10)
- RX2+ (pin 11) and RX2- (pin 12) These pairs are used for high-speed data transmission in USB 3.0 or alternate modes like DisplayPort over USB Type-C.
Configuration Channel and Sideband Use Lines:
- CC1 (pin 5) and CC2 (pin 6) serve as Configuration Channel lines for USB Type-C, allowing for cable orientation detection and configuration for Alternate Modes.
- SBU1 (pin 7) and SBU2 (pin 8) are Sideband Use lines, which can be used for alternate mode signaling or additional data channels.
Shielding: The connector includes pins for shielding (pins 13, 14, 15, 16), which are crucial for reducing electromagnetic interference (EMI) and maintaining the integrity of high-speed signals.

Overall, J6 is a multifunctional connector that supports both power delivery and high-speed data transfer, making it suitable for applications requiring USB connectivity with potential for alternate modes or additional functionalities.

Someone is typing...

recommend a replacement for U1.

ashmit

@copilot recommend a replacement for U1.

copilot

The U1 in your project is STM32L053R8T6 by STMicroelectronics, a low-power ARM Cortex-M0+ MCU.

A potential alternative for this MCU is the STM32L073RZT6. This MCU also belongs to the STM32L0 family and features an ARM Cortex-M0+ core. They have similar features and both can be used in low-power applications due to their ultra-low-power performance.

However, note that STM32L073RZT6 has more Flash memory (192KB compared to 64KB in STM32L053R8T6) and more RAM (20KB compared to 8KB in STM32L053R8T6). The pinouts are also not identical, so the STM32L073RZT6 may not be a drop-in replacement depending on your requirements.

Make sure to validate any new parts in your schematic and layout, as there may be subtle differences that could cause issues in your design. As always, confirm the availability of the chips since the global electronics supply chain can sometimes cause chips to be in short supply.

Someone is typing...

what pin of u1 would best be used to measure the input voltage of the system

kirbie426600

@copilot what pin of u1 would best be used to measure the input voltage of the system

copilot

To measure input voltage, typically an Analog-to-Digital Converter (ADC) would be used. From the datasheet excerpts, it seems the STM32L053R8T6 microcontroller (U1) provides several ADC inputs. Depending on the system requirements, one of these ADC inputs could be used to measure the input voltage.

The exact pin you should use depends on the specific configuration and requirements of your system. For example, if you want to make an isolated measurement, you could use the ADC input pins such as PA0 or PA1. However, additional circuit components such as a voltage divider may be required to scale the input voltage to a range that the ADC can safely convert.

In your case, please remember to consider the maximum and minimum voltage values the ADC can handle (0 to 3.3V for this case) to avoid damaging the microcontroller. If your input voltage exceeds 3.3V you should use a voltage divider or other means to bring this voltage to an acceptable range.

Please note that you may need to properly configure the ADC in your microcontroller's software to read these voltage measurements correctly.

kirbie426600

please recommend a sensible resistor divider to measure VIN based on the ratings of U2.

copilot

To create a voltage divider for measuring the VIN, which is connected to U2 (AP2112K-3.3TRG1) regulator, we need to consider the maximum possible voltage input of VIN. However, the information provided doesn't seem to specify the maximum voltage of VIN. For the sake of this exercise, let's assume it could be up to 12V.

The goal of the resistor divider is to step down the potentially 12V input to a maximum of 3.3V as it is the maximum ADC input for the STM32L053R8T6 MCU. A suitable resistor divider would be a 27kΩ resistor for R1 and a 10kΩ resistor for R2.

In this configuration, the connection would be as follows:

Connect the VIN to one end of R1.
Connect the other end of R1 to one lead of R2, and to an ADC pin on the microcontroller.
Connect the other end of R2 to Ground.

This setup would give you a voltage division of approximately 1/4, enough to bring a 12V signal down to around 3V, which is within the acceptable range for the ADC on the STM32L053R8T6.

In the actual circuit design, you may want to consider adding a small capacitor parallel to R2 to ground to filter out any potential high-frequency noise.

Please note to replace the 10kΩ and 27kΩ resistors with actual resistor values that you have on hand or that suit your exact design requirements.

Someone is typing...

LM5122MHX/NOPB schematic

yaksh

@copilot LM5122MHX/NOPB schematic

copilot

Based on the description of your project and the components listed in it, it looks like you are interested in incorporating the LM5122MHX/NOPB into your schematic. The LM5122 is a wide voltage range, synchronous boost controller from Texas Instruments that supports the design of boost or SEPIC (Single-Ended Primary-Inductor Converter) configurations.

I'll guide you through a basic connection setup for the LM5122 in a boost converter configuration, assuming you want to integrate it into your existing project. Since the LM5122MHX/NOPB is not explicitly listed in your project description, I will go ahead with generic guidance based on the typical application circuit from its datasheet and make assumptions where necessary. Keep in mind, you'll need to adapt these guidelines based on your specific requirements such as input voltage, output voltage, and load current.

LM5122 Basic Boost Converter Configuration

Input Capacitor: Place a high-quality ceramic input capacitor close to the VIN and GND pins of the LM5122. This helps in managing the input surge currents.
- Connect CIN:1 (positive) to VIN of LM5122.
- Connect CIN:2 (GND) to system ground.
Bootstrap Capacitor: The bootstrap capacitor is essential for the high-side gate driver. It should be placed close to the BOOT and SW pins of the LM5122.
- Connect CBOOT:1 to BOOT of LM5122.
- Connect CBOOT:2 to SW of LM5122 (through an external diode if required by your configuration).
Output Capacitor: A high-quality output capacitor is necessary to stabilize the output voltage and manage the load transients.
- Connect COUT:1 (positive) to VOUT of LM5122.
- Connect COUT:2 (GND) to system ground.
Inductor: The inductor value determines the boost converter's performance, including efficiency, output voltage ripple, and transient response.
- Connect L:1 to SW of LM5122.
- Connect L:2 to VOUT of boost converter configuration.
Feedback and Compensation: Feedback from the output voltage is necessary for regulation, and compensation components are required for loop stability.
- Connect FB of LM5122 to the voltage divider network tied to the output voltage.
- Connect COMP of LM5122 to the compensation network designed based on your loop stability analysis.
Gate Drivers: External gate drivers (for the high-side and low-side MOSFETs) are connected to the GH and GL pins.
- Connect GH of LM5122 to the gate of the high-side MOSFET.
- Connect GL of LM5122 to the gate of the low-side MOSFET.
Power MOSFETs: High-side and low-side MOSFETs are critical components in the boost converter design. Selection depends on the maximum input voltage, output current, and switching frequency.
- Connect DRAIN of high-side MOSFET to L:1.
- Connect SOURCE of high-side MOSFET to SW of LM5122 and DRAIN of low-side MOSFET.
- Connect SOURCE of low-side MOSFET to system ground.
Power Ground and Signal Ground: Ideally, keep the power ground (PGND) and signal ground (AGND) connections separate to reduce noise and improve performance. They can be connected at a single point near the source of the LM5122.

Since your project appears to be under development, please adjust the component values such as capacitors (CIN, CBOOT, COUT), inductor (L), and resistors in the feedback and compensation networks based on your specific needs. Always refer to the LM5122 datasheet for detailed design considerations, including layout tips, to optimize performance.

This setup is a high-level overview. If you have specific aspects of the LM5122 circuit you'd like to discuss, such as feedback loop design, switching frequency considerations, or thermal management, let me know!

Someone is typing...

please explain what U2 does.

aakashts98

@copilot please explain what U2 does.

copilot

Explanation of U2

Designator:

U2

Part Number: AP2112K-3.3TRG1
Manufacturer: Diodes Incorporated

The AP2112K-3.3TRG1 is a 3.3V low-dropout (LDO) linear voltage regulator.

Functionality

Voltage Regulation: $U2$ regulates an input voltage down to 3.3V with a stable output.
Low Dropout: Allows the regulator to work efficiently with a small differential between input and output voltage.
Enable Pin: The EN (Enable) pin controls whether the regulator is on or off. When EN is high, the regulator is enabled.

Pin Description

VIN (Pin 1): The input voltage to the regulator. It should be higher than 3.3V plus the dropout voltage.
GND (Pin 2): Ground pin.
VOUT (Pin 5): The regulated 3.3V output.
EN (Pin 3): Enable pin.

Schematic Details

In your design:

The input voltage ( $VIN$ ) is supplied to VIN.
The output voltage (VOUT) provides 3.3V to various components.
The ground pin (GND) is connected to the common ground plane.
The EN pin is also tied to the VIN, ensuring that the regulator is always enabled when power is supplied.

Assumptions

Here are the assumed connections based on your project details:

VIN Source: Assumed as a supply voltage higher than 3.3V.
GND: Common ground.

Connections

Connect $VIN:1$ to $U2:VIN$ .
Connect $GND$ :GND to $U2:GND$ .
Connect $U2:VOUT$ to the 3.3V power net ( $3V3$ ).
Connect $U2:EN$ to $VIN$ :P1 (or another method of controlling the EN pin if you wish to disable the regulator under certain conditions).

Someone is typing...

explain this project.

rpthilakarathne

@copilot explain this project.

copilot

This project is a development board based on the STM32L0 microcontroller.

The board includes several components with the microcontroller U1, an STM32L053R8T6, as the central component. Here's a summary of the key components:

STM32L053R8T6 (U1): This is the STM32L0 microcontroller by STMicroelectronics, which is known for its low-power operation.
VL53L1CXV0FY/1 (U3): This is a Time-of-Flight (ToF) ranging sensor with advanced ranging capabilities, which can provide highly accurate distance measurements.
AP2112K-3.3TRG1 (U2): This is a 600mA CMOS LDO regulator, used in the project for power management.
MP34DT06JTR (M1): This is a MEMS audio sensor omnidirectional digital microphone, providing sound capture capabilities to the project.
2012670005 (J6): This is a USB Type-C connector, providing USB connectivity to devices.
Passive components like resistors (R1, R2, R3, etc.), capacitors (C1, C2, etc.), and LEDs (LED2).

The components are arranged in specific nets to allow the proper flow of electrical current and signals. The project also includes connectors (like J1, J2, and J3) to facilitate linking with other devices or components.

Although the exact functionality of the board would depend on the firmware loaded to the STM32L0 microcontroller, it appears to have the capability of capturing audio data, performing range sensing, and communicating with other devices over USB given the selected components.

Source(s):

Someone is typing...

SWCLK

PB4

PA2

PB5

PA8

I2C_SDA

PC8

PA15

PA3

PC10

PC11

PA10

B_LED

USB_D-

G_LED

PC7

PA9

PA1

I2C_SDA

DOUT

SWDIO

PC6

I2C_SCL

BOOT

PB3

PC9

PC12

R_LED

I2C_SCL

SCK

USB_D+

VIN

3V3

Capacitance

10u F

3V3

VIN

3V3

LED2

Capacitance

10u F

VIN

3V3

R10

C12

Capacitance

10u F

End of Life

C11

Capacitance

10u F

Reviews

Electrical Rule Checks

Missing Footprints

Reports parts that have no footprint.

Design Rule Checks

Overlapping Copper • 36

Des	Net	Des	Net
Trace 6c6d	GND	U1:VSS	None
Trace 20ba	GND	LED2:A	None
Trace 027a	GND	U3:AVSSVCSEL	None
Trace 60db	GND	U1:VSSA	None
Trace 63bd	GND	J1:Pin_2	None
Trace 94ca	GND	U2:GND	None
Trace 1402	GND	U3:AVSSVCSEL	None
Trace 1402	GND	U3:GND	None
Trace 4728	GND	U1:VSS	None
Trace 8310	GND	U1:VSS	None
Trace aa15	GND	U1:VSS	None
Trace dde3	GND	U1:VSSA	None
Trace 6e57	Net (J6 - D2+)	J6:D1+	None
Trace 04b1	Net (LED2 - B)	LED2:B	None
Trace 04b1	Net (LED2 - B)	R10:P1	None
Trace 5b0e	Net (LED2 - B)	R10:P1	None
Trace 03c3	Net (M1 - CLK)	M1:CLK	None
Trace 011b	Net (M1 - CLK)	U1:PB10	None
Trace 390e	Net (M1 - CLK)	M1:CLK	None
Trace be7d	Net (M1 - CLK)	M1:CLK	None
Trace e138	Net (M1 - CLK)	M1:CLK	None
Via	Net (M1 - CLK)	M1:CLK	None
Trace 4e37	Net (U1 - PA1)	U1:PA1	None
Trace 48e1	Net (U1 - PA1)	J2:Pin_3	None
Trace 049a	Net (U1 - PA1)	U1:PA1	None
Trace 0f2f	Net (U1 - PC3)	U1:PC3	None
Trace c86b	Net (U1 - PC3)	M1:DOUT	None
Trace d416	Net (U1 - PC3)	M1:DOUT	None
Trace 8ac5	Net (U1 - PC10)	U1:PC10	None
Trace 9e38	Net (U1 - PC10)	U1:PC10	None
Trace 106b	Net (U1 - PC10)	J3:Pin_11	None
C2:P1	None	Trace fe42	GND
J6:D2+	None	Trace 8ae5	Net (J6 - D2+)
J6:D2+	None	Trace ca98	Net (J6 - D2+)
U1:PA12	None	Trace f9ed	Net (J6 - D2+)
U3:GND	None	Trace 561b	GND

Invalid Layer

Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.

Component Overrides • 15

	Designator	Ruleset
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀VALUE｀＊	Override rule for ＊｀VALUE｀＊
	＊｀VALUE｀＊	Override rule for ＊｀VALUE｀＊
	＊｀VALUE｀＊	Override rule for ＊｀VALUE｀＊
	＊｀VALUE｀＊	Override rule for ＊｀VALUE｀＊
	＊｀VALUE｀＊	Override rule for ＊｀VALUE｀＊
	＊｀VALUE｀＊	Override rule for ＊｀VALUE｀＊

Airwires

Reports missing routed traces between pads in a net.

Deprecated Rules

Reports nodes that are using rules that are not supported anymore.

Layers with Multiple Fills

Reports layers that have multiple copper fills of different nets. Make sure the Connected Layers rule value of nets with fills is valid.

Floating Copper • 3

	Name
	Trace 4a5f
	Trace 3bc0
	Trace 8215

Protected Intrusions

Reports intrusions from objects of other nets into polygons or fills that have the Protected layout rule applied.

Manufacturing

Manufacturer Part Number • 12

	Designator	MPN
	C1	None
	C2	None
	C11	None
	C12	None
	J1	None
	J2	None
	J3	None
	R1	None
	R2	None
	R3	None
	R9	None
	R10	None

Parts Available

Beta

Checks that all parts have a part number and are available from distributors.

System Checks

Auto-Layout

Beta

Reports issues with Auto-Layout if Flux cannot route something or must ignore a configuration.

Passive Components

Resistor Power Rating

Beta

Checks that the power traveling across a given resistor is under its rating with 50% headroom.

Learn more

Pull Up/Pull Down Presence

Beta

Checks that IC pins that require pull up or pull down resistors have them.

Learn more

Capacitor Voltage Rating

Beta

Checks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
jharwinbarrozo
15.1k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Inspect

example stm32l0 board

Controls

Properties

License

https://creativecommons.org/licenses/by/4.0/

Availability & Pricing

Distributor		Qty 1
	Arrow	$9.87–$14.97
	Digi-Key	$11.43–$18.26
	LCSC	$9.44–$9.46
	Mouser	$14.28
	Verical	$7.59–$15.85

Assets

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.