Temperature and Humidity Sensor Node Design

flux

1:21

Reflecting on tool usage.

Identifying design intents.

Planning tool usage.

Developing the PCB design plan.

Accessing knowledge base.

Structuring the project plan.

I’ll create your low-power USB‑C environmental node with Wi‑Fi + BLE and a digital T/RH sensor. Here’s the plan:

Add core parts: a dual‑radio Wi‑Fi+BLE MCU/module, a digital T/RH sensor, a USB‑C Receptacle with Rd CC resistors and a USB Data-Line TVS Diode; plus a programming/debug header.
Power path & protection: add an input TVS Diode, Resettable PTC Fuse, and reverse‑current element (Ideal Diode Controller / MOSFET OR-ing or Schottky Diode); implement an OVP/UVLO/OCP Protection IC sized for 0.5–3 A sources; regulate 5 V to 3.3 V with a Buck Converter (or LDO if acceptable), and required bulk/decoupling caps.
Connectivity & nets: connect I2C between MCU and sensor with 4.7k Resistors pull‑ups; wire USB‑C CC with proper Rd for 5 V default; add boot/reset circuits, decoupling, and test points.
PCB: reserve antenna keep‑outs for a 2.4 GHz Antenna, apply RF and USB ESD routing practices, place and auto‑route; iterate DRC/ERC and part availability.
Finalize: silkscreen, verify protections and power rails, and generate BOM and manufacturing files.

This plan is ready to run. Click Start to execute, or let me know if you’d like any changes (MCU/module choice, antenna type, sensor accuracy, or board size).

Plan

#Goal

Design and build a low-power consumer environmental node, featuring an ultra‑low‑power MCU with dual‑radio Wi‑Fi (802.11 b/g/n 2.4 GHz) and BLE 5.x, powered by a USB‑C 5 V source, incorporating reverse polarity, OVP, UVLO, and OCP protections, and integrated with a digital temperature/humidity sensor.

#Implementation plan

Core components integration
1. Select and add a dual‑radio MCU/module supporting Wi‑Fi 802.11 b/g/n and BLE 5.x to the project.
2. Select and add a digital temperature/humidity sensor.
3. Include a USB‑C receptacle with appropriate CC port resistors (Rd) and ESD protection.
4. Add a programming/debug header for firmware updates.
Power path and protection circuitry
1. Integrate a three-element input protection scheme using a bidirectional low‑capacitance TVS for USB data lines (D+/D-) and series Schottky diode for reverse‑current prevention.
2. Add a resettable PTC and TVS for robust surge and overcurrent protection on the USB‑C input.
3. Use an ideal‑diode or MOSFET solution for reverse‑current protection.
4. Implement an OVP/UVLO/OCP integrated protection circuit to manage input from 0.5–3 A sources.
5. Add a 5 V to 3.3 V regulator (buck converter if power budget permits for efficiency, or LDO if noise is critical) with supplementary decoupling and bulk capacitors.
Inter-component connectivity & support circuits
1. Connect the digital sensor to the MCU via I²C and add appropriate pull-up resistors.
2. Wire USB‑C CC lines with recommended resistors for 5 V default operation.
3. Integrate proper boot/reset circuits and assign test points for debugging.
4. Ensure required bypassing and decoupling for RF performance and noise reduction.
PCB layout preparation
1. Reserve clear zones for the RF antenna and adhere to RF routing best practices.
2. Place components strategically with respect to the USB‑C interface and sensor placement.
3. Assure that input protection components and power circuitry are optimally positioned.
Final review and documentation
1. Run DRC/ERC checks for schematic and PCB layout compliance.
2. Verify power and protection circuits function as per design requirements.
3. Generate the BOM and manufacturing files.

#Success criteria

The schematic includes a dual‑radio MCU, digital temperature/humidity sensor, USB‑C interface with CC resistors, and necessary programming/debug header.
The power path features reverse polarity, OVP, UVLO, and OCP protections suitable for USB‑C operation.
Complete and error-free layout with reserved RF antenna zones, proper component placement, and connections meeting design specifications.
All relevant design rules (DRC/ERC) and fabrication guidelines are met.

Pick MCU module

Choose T/RH sensor

USB-C sink setup

Select protection IC

Power rail approach

77 days

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.8k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M

Project Name

Prime Harlequin Flying Cab

Description

Welcome to your new project. Imagine what you can build here.

Properties

Properties describe core aspects of the project.

Pricing & Availability

See prices from popular manufacturers for your project.

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

sm7tjc / Prime Harlequin Flying Cab

Schematic