Interface ICs
An interface IC is a type of integrated circuit that is designed to facilitate communication between two devices or systems. These devices are commonly used in electronic systems to enable the transfer of data and control signals between different components or subsystems. Some common use cases for interface ICs include connecting microcontrollers to peripherals such as sensors or displays, linking multiple processors together in a network, and enabling communication between devices using different communication protocols. Flux.ai has the world's largest community-driven public library of interface ICs, with footprints, symbols, datasheets, and simulation models. This library is a valuable resource for engineers and designers who need access to accurate and up-to-date information on these important components. Whether you are working on a new design project or simply looking to learn more about interface ICs, Flux.ai is an excellent resource to help you find the information you need.
MCP9808T-E/MS
Temperature Sensor Digital, Local -40°C ~ 125°C 10 b 8-MSOP The MCP9808T-E/MS is a high-accuracy digital temperature sensor developed by Microchip Technology for precision thermal monitoring applications. The device communicates through a standard I²C-compatible serial interface and is optimized for low-power embedded systems requiring accurate ambient temperature measurement. It integrates internal temperature sensing, analog-to-digital conversion, programmable alert functionality, and configurable power management within a compact MSOP package. The sensor is designed for applications including industrial monitoring, consumer electronics, IoT devices, thermal management systems, medical instrumentation, and battery-powered portable equipment. Its low operating current and shutdown capability make it suitable for energy-efficient systems where thermal accuracy and minimal power consumption are critical. The device supports programmable temperature limits and interrupt generation for over-temperature events, enabling autonomous thermal supervision without continuous host processor intervention. The MCP9808T-E/MS maintains high measurement accuracy across a wide operating temperature range and offers stable digital output without requiring external calibration components. Electrical Characteristics Supply voltage operation supports low-voltage and standard logic systems. Low operating current enables efficient continuous monitoring. Shutdown mode significantly reduces power consumption during inactive periods. Digital I²C interface supports standard and fast communication modes. Integrated temperature conversion engine provides direct digital temperature output. Temperature Sensing Features High-accuracy ambient temperature measurement. Wide operating temperature range suitable for industrial environments. Programmable resolution for balancing conversion speed and precision. Configurable upper, lower, and critical temperature alert thresholds. Integrated hysteresis control for stable thermal event detection. Communication Interface I²C-compatible serial communication interface. Configurable slave addressing for multi-device bus operation. Supports read and write access to internal configuration registers. Compatible with common microcontrollers and embedded processors. Functional Features Integrated alert output for thermal event signaling. Programmable interrupt and comparator operating modes. Internal registers support temperature monitoring and device configuration. Power-on reset circuitry ensures predictable startup behavior. Device identification registers support system-level verification. Mechanical Characteristics Package type is MSOP with compact surface-mount footprint. Suitable for automated PCB assembly processes. RoHS-compliant and lead-free manufacturing. Typical Applications Industrial temperature monitoring systems. Portable battery-powered electronics. Embedded microcontroller systems. Thermal protection and supervision circuits. Consumer and IoT sensing devices. Medical and laboratory instrumentation. #CommonPartsLibrary #Sensor #Transducer #Temperature-Sensor #MCP9808
22 Uses0 StarsTMP114NCIYMTR
Temperature Sensor Digital, Local -40°C ~ 125°C 16 b 4-PICOSTAR (0.76x0.76) The TMP114NCIYMTR is a high-accuracy digital temperature sensor designed for precision thermal monitoring applications in industrial, automotive, medical, and embedded electronic systems. The device integrates a precision band-gap temperature sensing element, analog-to-digital conversion circuitry, EEPROM memory, and a digital communication interface within a compact low-power package. The sensor supports accurate local temperature measurements with factory calibration and programmable alert functionality, enabling reliable thermal protection and environmental monitoring in space-constrained designs. Engineering Specification Manufacturer: Texas Instruments Manufacturer Part Number: TMP114NCIYMTR Device Type: Digital Temperature Sensor Temperature Measurement Method: Local Semiconductor Temperature Sensing Interface Type: I²C-Compatible Serial Interface Supply Voltage Range: Ultra-Low Voltage Operation Compatible with Battery-Powered Systems Temperature Measurement Range: Industrial Temperature Range Support Accuracy: High-Precision Factory-Calibrated Temperature Measurement Resolution: High-Resolution Digital Temperature Output Conversion Architecture: Integrated Sigma-Delta Analog-to-Digital Conversion Programmable Features: High and low temperature alert thresholds EEPROM-stored configuration settings Programmable conversion rate Offset correction calibration Alert and interrupt functionality Power Consumption: Optimized for Low-Power Embedded Applications Communication Speed: Standard and Fast-Mode I²C Support Package Type: Small Outline Leadless Package Mounting Type: Surface Mount Technology Operating Environment: Suitable for Industrial and Embedded Control Systems Protection Features: Integrated thermal monitoring alerts Nonvolatile configuration retention Robust digital communication interface Applications: Industrial temperature monitoring Medical instrumentation Battery-powered electronics Thermal management systems Precision embedded sensing Data acquisition equipment Environmental monitoring devices #commonpartslibrary #integratedcircuit #temperaturesensor #digital
5 Uses0 StarsINA229AIDGST
Current Monitor Regulator High-Side 10mA 10-VSSOP The INA229AIDGST is a high-precision digital power monitor designed for accurate measurement of shunt voltage, bus voltage, current, power, energy, and charge in low- and high-side sensing applications. The device integrates a low-offset delta-sigma analog-to-digital converter with programmable calibration and alert functionality, enabling precise system-level power monitoring in industrial, automotive, telecommunications, server, and battery-powered applications. The device communicates through a high-speed I²C- and SMBus-compatible serial interface and supports wide common-mode voltage operation for flexible integration into multi-rail power systems. Internal computation engines provide direct digital reporting of current, power, accumulated energy, and charge values, minimizing host processor overhead. The INA229AIDGST includes programmable conversion timing, averaging modes, alert outputs, and diagnostic monitoring features to support advanced power management and protection architectures. Its low input offset and high measurement accuracy make it suitable for precision instrumentation, energy metering, and power optimization systems. Key Features High-accuracy current, voltage, power, energy, and charge monitoring Supports both high-side and low-side current sensing architectures Wide common-mode input voltage range Integrated precision delta-sigma ADC architecture Direct digital calculation of power, energy, and accumulated charge Programmable calibration and averaging configuration I²C- and SMBus-compatible communication interface Configurable alert and fault monitoring output Low offset voltage and low gain error for precision measurements Programmable conversion time and operating modes Integrated temperature measurement support Suitable for industrial, enterprise, automotive, and battery-powered systems Electrical Characteristics Precision shunt voltage measurement capability High-resolution bus voltage monitoring Integrated current and power computation engine Low quiescent current operation Wide supply voltage operating range High common-mode transient immunity Low measurement drift over temperature Interface and Control I²C-compatible serial interface SMBus compatible operation Programmable device addressing Configurable alert pin functionality Internal register-based configuration and diagnostics Package Information Package Type: VSSOP Package Variant: DSG Surface-mount package configuration Thermally optimized compact footprint suitable for dense PCB layouts Typical Applications Power supply monitoring Battery management systems Industrial automation equipment Telecom infrastructure Server and data center power management Embedded system power analytics Energy monitoring and metering DC motor and actuator monitoring #commonpartslibrary #integratedcircuit #powermanagement #powersupplycontroller
1 Uses0 StarsINA228AIDGSR
Power Supply Controller Digital Power Monitor 10-VSSOP The INA228AIDGSR is a high-precision digital power monitor and current-sense amplifier designed for accurate measurement of shunt voltage, bus voltage, current, power, energy, and charge in DC power systems. The device integrates a low-offset differential amplifier with high-resolution analog-to-digital converters and supports bidirectional current sensing across a wide common-mode voltage range. Communication is provided through an I²C- and SMBus-compatible digital interface, enabling direct telemetry integration into embedded control and battery management systems. The device is optimized for high-accuracy power monitoring applications requiring low drift, low offset, and high dynamic range. Integrated mathematical computation functions reduce host processor overhead by internally calculating current, power, accumulated energy, and charge values. Programmable conversion timing and averaging modes allow optimization between measurement speed and noise performance. The INA228AIDGSR is suitable for server power distribution, industrial automation, telecom infrastructure, automotive subsystems, battery-powered equipment, and precision instrumentation requiring real-time power analytics and fault monitoring. Engineering Specification Device Type Digital power monitor with integrated current-sense amplifier and high-resolution ADC. Measurement Functions Supports measurement of: Differential shunt voltage Bus voltage Current Power Energy accumulation Charge accumulation Temperature through external sensing methods Current Sensing Supports bidirectional current measurements using an external shunt resistor with programmable calibration scaling. ADC Architecture Incorporates high-resolution delta-sigma analog-to-digital converters with programmable conversion time and averaging configuration. Interface Uses I²C- and SMBus-compatible serial communication interface with programmable device addressing. Voltage Monitoring Supports high-side and low-side sensing across a wide common-mode input voltage range suitable for multi-rail power systems. Accuracy Features Includes: Low input offset voltage Low offset drift Precision gain architecture High measurement linearity Integrated calibration engine Power Computation Internally computes: Instantaneous power Average power Energy accumulation over time Charge accumulation over time Alert and Protection Features Provides programmable alert functionality for: Overcurrent Undervoltage Overvoltage Power threshold violations Conversion-ready indication Operating Modes Supports: Continuous conversion mode Triggered conversion mode Low-power shutdown mode Package Information Supplied in a compact VSSOP surface-mount package suitable for automated PCB assembly and space-constrained applications. Temperature Range Designed for operation across industrial temperature environments suitable for embedded and power-management systems. Typical Applications Battery management systems Power supply monitoring Server and telecom power rails Industrial control systems DC energy metering Embedded power analytics Automotive electronics Portable instrumentation #commonpartslibrary #integratedcircuit #powermanagement #powersupplycontroller
15 Uses0 StarsBQ27220YZFR
Battery Battery Monitor IC Lithium Ion 9-DSBGA The BQ27220YZFR is a highly integrated single-cell battery fuel gauge IC developed for rechargeable lithium-ion and lithium-polymer battery applications. The device utilizes Texas Instruments’ Impedance Track™ algorithm to provide highly accurate battery capacity measurement, state-of-charge estimation, runtime prediction, and battery health monitoring across varying load and temperature conditions. The device is designed for compact portable electronics, wearable devices, IoT products, handheld instruments, and low-power embedded systems requiring precise battery monitoring and extended operating life. The BQ27220YZFR supports system-side fuel gauging without requiring battery pack-side electronics, simplifying battery integration and reducing overall system cost. The fuel gauge continuously monitors battery voltage, current, and temperature to estimate available capacity, remaining runtime, full charge capacity, and state-of-health information. Integrated low-power operation enables ultra-low standby current consumption suitable for always-on battery-powered products. Communication with the host processor is implemented through a standard I²C interface, allowing configuration access, telemetry reporting, and battery parameter monitoring. The device also integrates protection and alert functionality through programmable interrupt outputs and battery condition monitoring features. The BQ27220YZFR is optimized for use with single-cell lithium-based chemistries and supports learning cycles for adaptive battery characterization over product lifetime. Internal data flash memory stores battery profile information and calibration parameters to improve long-term gauging accuracy. The device is supplied in a compact lead-free wafer chip-scale package suitable for space-constrained PCB designs and portable electronics requiring minimal footprint and low-profile assembly. Electrical Characteristics Device Type Single-cell battery fuel gauge and battery monitor IC Battery Chemistry Support Lithium-ion and lithium-polymer rechargeable batteries Input Voltage Range Supports single-cell battery operation Fuel Gauging Method Impedance Track™ algorithm Communication Interface I²C serial interface Measurement Functions Battery voltage monitoring Battery current monitoring Battery temperature monitoring State-of-charge estimation Remaining capacity calculation Full charge capacity estimation State-of-health reporting Runtime prediction Power Consumption Ultra-low operating current for portable applications Temperature Monitoring External thermistor support Host Alert Features Interrupt and alert reporting capability Data Storage Integrated nonvolatile configuration memory Calibration Features Automatic learning and battery characterization support Protection Monitoring Battery condition and system monitoring functions Package Type DSBGA wafer chip-scale package Mounting Style Surface mount Operating Temperature Range Industrial temperature operation suitable for portable electronics Functional Features High-accuracy fuel gauging over battery lifetime Adaptive battery modeling and aging compensation Low-power operation for battery-powered systems Integrated battery profiling capability Real-time remaining runtime estimation Automatic battery learning cycles Compact PCB footprint for portable devices System-side implementation without smart battery pack requirement Programmable battery alert functionality Support for low-power embedded processors and mobile systems Optimized for wearable and IoT applications RoHS compliant and lead-free package construction #commonpartslibrary #integratedcircuit #powermanagement #batterymanagement
23 Uses0 StarsAD7714YNZ
24 Bit Analog to Digital Converter 3, 5 Input 1 Sigma-Delta 24-PDIP AD7714 DIP-24 The AD7714 is a complete analog front end for low-frequency measurement applications. The device accepts low level signals directly from a transducer and outputs a serial digital word. It employs a sigma-delta conversion technique to realize up to 24 bits of no missing codes performance. The input signal is applied to a proprietary programmable gain front end based around an analog modulator. The modulator output is processed by an onchip digital filter. The first notch of this digital filter can be programmed via the on-chip control register allowing adjustment of the filter cutoff and settling time. The part features three differential analog inputs (which can also be configured as five pseudo-differential analog inputs) as well as a differential reference input. It operates from a single supply (+3␣ V or +5␣ V). The AD7714 thus performs all signal conditioning and conversion for a system consisting of up to five channels Charge Balancing ADC 24 Bits No Missing Codes 0.0015% Nonlinearity Five-Channel Programmable Gain Front End Gains from 1 to 128 Can Be Configured as Three Fully Differential Inputs or Five Pseudo-Differential Inputs Three-Wire Serial Interface SPI™, QSPI™, MICROWIRE™ and DSP Compatible 3 V (AD7714-3) or 5 V (AD7714-5) Operation Low Noise (<150 nV rms) Low Current (350␣ mA typ) with Power-Down (5 mA typ) AD7714Y Grade: +2.7 V to 3.3 V or +4.75 V to +5.25 V Operation 0.0010% Linearity Error –408C to +1058C Temperature Range Schmitt Trigger on SCLK and DIN Low Current (226␣ mA typ) with Power-Down (4 mA typ) Lower Power Dissipation than Standard AD7714 Available in 24-Lead TSSOP Package Low-Pass Filter with Programmable Filter Cutoffs Ability to Read/Write Calibration Coefficients APPLICATIONS Portable Industrial Instruments Portable Weigh Scales Loop-Powered Systems Pressure Transducers #CommonPartsLibrary #IntegratedCircuit #AD7714
3 Uses0 StarsNRF52840-QFAA-F-R
IC RF TxRx + MCU 802.15.4, Bluetooth Bluetooth v5.0, Thread, Zigbee® 2.4GHz 48-VFQFN Exposed Pad The NRF52840-QFAA-F-R belongs to Nordic’s nRF52 series and supports multiple wireless standards including Bluetooth 5, Bluetooth Low Energy (BLE), Thread, Zigbee, ANT, and proprietary 2.4 GHz protocols. It features a 64 MHz ARM Cortex-M4F CPU with floating-point unit (FPU), making it suitable for both wireless communication and real-time embedded processing. The device integrates large memory resources, rich peripherals, USB support, NFC capability, and advanced security features, reducing the need for external components in wireless embedded designs. Key Features 32-bit ARM Cortex-M4F processor running at 64 MHz 1 MB Flash memory and 256 KB RAM Supports Bluetooth 5 / BLE, Thread, Zigbee, ANT, and proprietary 2.4 GHz protocols IEEE 802.15.4 compliant radio Up to +8 dBm TX output power High receiver sensitivity down to −103 dBm Data rates up to 2 Mbps Ultra-low power consumption for battery-powered applications USB 2.0 Full-Speed controller NFC-A tag support Multiple communication interfaces: SPI UART I2C (TWI) I2S PWM PDM ADC Up to 48 GPIOs Integrated ARM CryptoCell-310 security engine Operating voltage range: 1.7 V to 5.5 V Operating temperature: −40°C to +85°C Compact 48-QFN (6×6 mm) package Typical Applications BLE devices Smart home products Wearables Wireless sensors Industrial IoT HID devices (keyboard/mouse) Asset tracking Mesh networking devices USB dongles and gateways PCB Design Notes Community PCB reviews commonly recommend: Proper RF grounding and 50-ohm antenna routing Using ESD/TVS protection on USB lines Keeping RF matching components close to the antenna Using solid ground planes for 2.4 GHz performance #CommonPartsLibrary #IntegratedCircuit #RF
25 Uses0 StarsTPD2E2U06DCKR
12.4V (Typ) Clamp 5.5A (8/20µs) Ipp Tvs Diode Surface Mount SC-70-3 TPD2E2U06 USB ESD The TPD2E2U06 is a dual-channel low capacitance TVS diode ESD protection device. The device offers ±25-kV contact and ±30-kV air-gap ESD protection in accordance with the IEC 61000-4-2 standard. The 1.5-pF line capacitance of the TPD2E2U06 makes the device suitable for a wide range of applications. Typical application interfaces are USB 2.0, LVDS, and I 2C™. Features 1• IEC 61000-4-2 Level 4 – ±25 kV (Contact discharge) – ±30 kV (Air-gap discharge) • IEC 61000-4-5 Surge protection – 5.5-A Peak pulse current (8/20 µs Pulse) • IO Capacitance 1.5 pF (Typ) • DC Breakdown voltage 6.5 V (Min) • Ultra-Low leakage current 10 nA (Max) • Low ESD clamping voltage • Industrial temperature range: –40°C to +125°C • Small easy-to-route DRL and DCK package #CommonPartsLibrary #TVS-diode
363 Uses0 StarsLG290P03AAMD
Quectel LG290P (03) high-precision quad-band GNSS module, supports GPS/GLONASS/Galileo/BDS/QZSS/NavIC constellations, simultaneous L1/L2/L5/E6 reception, SBAS support, quad-band RTK positioning with fast convergence, integrated interference detection and mitigation, protection-level integrity functions, Secure Boot support, UART and I2C interfaces, low power consumption, compact 12.2 x 16.0 x 2.6mm LGA package. lg290
2 Uses0 StarsMAX77958EWV+
Mobile Communications PMIC 30-WLP (2.62x3.07) The MAX77958EWV+ is a highly integrated USB Type-C and USB Power Delivery (USB PD) controller designed for portable and battery-powered electronic systems. Manufactured by Analog Devices/Maxim Integrated, the device provides complete USB Type-C Configuration Channel (CC) detection, USB PD protocol management, and power path control functionality within a compact wafer-level package. It is optimized for applications requiring flexible USB charging, power negotiation, and accessory support while minimizing external component count and system complexity. The device integrates a USB Type-C Port Controller (TCPC), Power Delivery Policy Engine, BC1.2 charger detection, VCONN management, dead battery support, and integrated protection features. It supports both sink and dual-role power operation, enabling intelligent power negotiation between connected devices and external power adapters. The controller communicates with the host processor through an I²C interface, allowing firmware-based configuration and monitoring. The MAX77958EWV+ is intended for smartphones, tablets, wearable devices, portable computing platforms, docking stations, embedded systems, and other USB Type-C enabled consumer electronics requiring reliable power delivery and advanced USB connectivity management. Electrical Characteristics The device operates from a low-voltage supply optimized for portable electronic systems. It supports USB Type-C and USB Power Delivery specifications with integrated CC line monitoring and protocol handling. The controller includes internal voltage regulation and protection mechanisms to ensure reliable operation during attachment, detachment, and fault conditions. The integrated USB Power Delivery engine supports multiple power profiles and dynamic voltage negotiation. The device supports sink functionality for charging applications and can be configured for dual-role operation depending on system requirements. Low standby current operation enables efficient battery-powered system implementation while maintaining USB attach detection capability. Functional Features Integrated USB Type-C Port Controller compliant with USB Type-C standards USB Power Delivery protocol engine supporting power negotiation and role management Support for sink and dual-role power configurations Integrated BC1.2 charger detection capability Dead battery support for autonomous attachment detection Integrated VCONN switch and cable orientation detection Automatic CC pin monitoring and cable attach detection I²C interface for host processor communication and configuration Integrated interrupt generation for event handling Support for programmable power profiles and policy management Internal fault monitoring and protection features Compact wafer-level package suitable for space-constrained applications Protection Features Overvoltage monitoring on USB Type-C interface lines Short-circuit protection support Thermal protection and fault detection mechanisms Integrated VCONN current limiting ESD protection for external USB interface connections Safe attach and detach handling during cable insertion events Interface Characteristics USB Type-C CC interface compliant with USB Type-C specifications I²C serial communication interface for host control Interrupt output for event notification Integrated support for orientation detection and cable identification Programmable configuration registers accessible through I²C Package Information Package type is wafer-level package optimized for compact portable designs RoHS compliant and suitable for lead-free manufacturing processes Designed for automated surface-mount assembly Applications Smartphones and mobile devices Tablet computers Wearable electronics Portable battery-powered equipment USB Type-C charging systems Embedded USB PD controllers Docking stations and accessories Consumer electronic products requiring USB Type-C connectivity #commonpartslibrary #integratedcircuit #powermanagement #mobilecommunications
3 Uses0 Stars
