Compact 30 mm x 20 mm 2-layer USB-C to TC2030 programming/debug adapter for ESP32-S3 native USB-Serial/JTAG with CC pull-downs, USB ESD protection, VBUS activity LED, manual reset, and JLCPCB-compatible manufacturing constraints.

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. #project-template #USB #typec #powerdelivery #template

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. #project-template #USB #typec #powerdelivery #template

Welcome to your new project. Imagine what you can build here.

Production-intent USB-C macropad based on ATmega32U4 TQFP-44 with 11 Cherry-MX hotswap keys, EC11 encoder, per-key diodes, USB ESD protection, and deferred routing until case STEP alignment.

Production-intent USB-C macropad based on ATmega32U4 TQFP-44 with 11 Cherry-MX hotswap keys, EC11 encoder, per-key diodes, USB ESD protection, and deferred routing until case STEP alignment.

USB‑C UFP USB 3.0 to SATA Bridge Using TI TUSB9261 with W25Q80DV Firmware Flash, 25 MHz Oscillator, Ultra‑Low Capacitance USB ESD Protection, and 1 A 5V‑to‑3.3V Buck Regulator

This project involves designing a complete schematic for a robotic arm controller based on the ESP32-C3 microcontroller, specifically using the ESP32-C3-MINI-1-N4 module. The design features a dual power input system and comprehensive power management, motor control, I/O interfaces, and status indicators—all implemented on a 2-layer PCB. Key Specifications: Microcontroller: • ESP32-C3-MINI-1-N4 module operating at 3.3V. • Integrated USB programming connections with reset and boot mode buttons. Power System: • Dual power inputs with automatic source selection: USB-C port (5V input) and barrel jack (6-12V input). • Power management using LM74610 smart diode controllers for power source OR-ing. • AMS1117-3.3 voltage regulator to deliver a stable 3.3V supply to the microcontroller. • Filter capacitors (10μF electrolytic and 100nF ceramic) at the input and output of the regulators. • Protection features including USBLC6-2SC6 for USB ESD protection and TVS diodes for barrel jack overvoltage protection. Motor Control: • Incorporates an Omron G5LE relay with a PC817 optocoupler and BC547 transistor driver. • Provides dedicated header pins for servo motors with PWM outputs. • Flyback diode protection implemented for relay safety. I/O Connections: • Header pins exposing ESP32-C3 GPIOs: Digital I/O (IO0-IO10, IO18, IO19) and serial communication lines (TXD0, RXD0), plus an enable pin. • Each I/O pin includes appropriate 10kΩ pull-up/pull-down resistors to ensure reliable performance. Status Indicators: • A power status LED with a current-limiting resistor. • A user-controllable LED connected to one of the GPIO pins. PCB Layout Requirements: • 2-layer PCB design with separate ground planes for digital and power sections. • Placement of decoupling capacitors close to power pins to reduce noise. • Adequate trace width for power lines to ensure efficient current flow. • Inclusion of mounting holes at the board corners for secure installation. • All components are properly labeled with correct values for resistors, capacitors, and other passive elements, following standard design practices for noise reduction, stability, and reliability. #RoboticArmController #ESP32C3 #SchematicDesign #PCBDesign #ElectronicsDesign #PowerManagement #MotorControl #EmbeddedSystems #IoT

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. #SubLayout #USB #typec #powerdelivery

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. #project-template #USB #typec #powerdelivery #template

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. #project-template #USB #typec #powerdelivery #template

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. #project-template #USB #typec #powerdelivery #template

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. #project-template #USB #typec #powerdelivery #template

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. #project-template #USB #typec #powerdelivery #template

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. #project-template #USB #typec #powerdelivery #template

Multi-subsystem ESP32-S3 coffee maker/alarm controller board for a Coffee Waker appliance. The design uses an ESP32-S3-WROOM-1-N8R8 module as the main Wi-Fi/Bluetooth MCU, with USB-C 2.0 device connectivity through a USB4105-GF-A connector, 5.1 kΩ CC pull-downs, and USBLC6-2SC6 ESD protection on the USB D+/D− pair. Power architecture includes a 12 V input on a JST VH B4P connector, a TPS62932 buck regulator generating the 5 V rail, a TLV1117LV33 3.3 V LDO for MCU/logic power, and TPS22919 load switches for controlled 3.3 V/5 V peripheral rails. Functional blocks include an NAU7802 load-cell ADC on I2C with two differential load-cell channels, a MAX98357A I2S audio amplifier/DAC with speaker/output filtering, a microSD socket on SDIO, I2C/test headers, UART/programming header, and auxiliary JST VH connectors for wake-light or external loads. The high-voltage section includes 120 VAC input/output screw terminals, a 5 V SPST-NO relay rated 15 A / 240 VAC max, a 1 A fuse, MOV surge suppression, diode snubber, and a dedicated heater output terminal.

EcoCore ESP32 Reference Board – Final Net Mapping, Protection Ratings, 4-Layer PCB Prep, and Integrated USB-C Programming Interface with USB-UART Bridge, CC Pull-Downs, Low-Capacitance ESD Protection, and Isolated USB 5V / 5V Actuator / 12V Rails (with Verified DRC/ERC Status and Pre-Production Layout Checklist)

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. With JST connectors and with block terminal connectors for VBUS #project-template #USB #typec #powerdelivery #project

USB-C to SATA portable external hard drive enclosure controller. Architecture includes USB Type-C 5 V sink input with 5.1 kΩ CC pull-downs, VBUS ESD/TVS and overcurrent protection, USB 3.2 Gen1 SuperSpeed differential pairs into a USB-to-SATA bridge, SATA data and power output for a 2.5-inch drive, regulated 3.3 V logic rail with optional 1.8 V rail if required by the bridge, 25 MHz reference clock, power/activity LEDs, and test points. Design target is compact portable use with stable spin-up power delivery, low EMI, controlled-impedance high-speed routing, and production-grade BOM options.

Production-ready ESP32-based HDMI + USB 8-bit gaming console using ESP32-WROOM-32E, ADV7513BSWZ HDMI transmitter, FT232RL USB bridge, W25Q32JV external flash, LMR50410 buck regulator, and TLV75801 LDO, with full decoupling, ESD protection, TMDS termination, HDMI/USB/power/programming connectors, buttons, LEDs, and audio, optimized for JLCPCB PCBA #ESP32 #HDMI #USB #GamingConsole #SchoolProject

Production-ready ESP32-based HDMI + USB 8-bit gaming console using ESP32-WROOM-32E, ADV7513BSWZ HDMI transmitter, FT232RL USB bridge, W25Q32JV external flash, LMR50410 buck regulator, and TLV75801 LDO, with full decoupling, ESD protection, TMDS termination, HDMI/USB/power/programming connectors, buttons, LEDs, and audio, optimized for JLCPCB PCBA #ESP32 #HDMI #USB #GamingConsole #SchoolProject