Connector Header Board Edge, Through Hole, Right Angle 48 position The 0366380003 is a wire-to-board connector component from Molex, typically used in power and signal connections between wires and a printed circuit board (PCB). Type: Wire-to-board connector housing (crimp style) Positions: 3 circuits (3-pin connector) Pitch: Typically ~3.68 mm (series dependent) Mounting: Cable-side housing (mates with PCB header) Locking mechanism for secure connection #CommonPartsLibrary #Connector #Header #CMC 36638

3-Pole Female XLR Receptacle – Panel-mount 3-pin female XLR connector for professional balanced audio signal interconnection. Features horizontal PCB solder termination, rear panel mounting, latch-lock mechanism, 6 A current rating per contact, <50 V operating voltage, ≤6 mΩ contact resistance, >10 GΩ insulation resistance, and 1.5 kVDC dielectric strength. Incorporates hard gold-plated tulip contacts, a plastic housing with steel latch, separate ground contact connected to the mating connector shell and front panel (not Pin 1), and is rated for more than 1,000 mating cycles. Operates over a −30°C to +80°C temperature range with UL94 V-0 flammability-rated housing. #Neutrik #NC3FAH2 #XLRConnector #FemaleXLR #PanelMount #AudioConnector #PCBMount #3PinXLR #GoldPlatedContacts #ProfessionalAudio #BalancedAudio #EmbeddedSystems

3-position 2.00 mm pitch Yeonho SMH200 wire-to-board crimp connector housing for cable-side connection. Use with matching SMH200/2.00 mm series crimp terminals and PCB wafer/header. Keywords / Hashtags: SMH200-03P, SMH200 3pin, Yeonho SMH200, 2.00mm connector, wire-to-board connector, crimp housing, 3-pin housing, HY2.0 connector, #SMH200 #SMH20003P #Yeonho #WireToBoard #2mmConnector #CrimpHousing #HY20

3 Position Wire to Board Terminal Block Horizontal with Board 0.200" Screw terminal 3-pin 5.08mm Through Hole #connector #terminalblock #tht

Connector Header Through Hole, Right Angle 3 position 0.100" (2.54mm) Pin header connector for board-to-board interconnection, featuring a 3-position, single-row, right-angle through-hole configuration with a 2.54 mm pitch. It is rated for 250 V and 3 A, uses gold-plated contacts, and is specified for an operating temperature range of −40 °C to +105 °C. #PinHeader #BoardToBoard #Connector #ThroughHole #RightAngle #2.54mmPitch #3Pin #250V #3A #WurthElektronik #WRPHD

CONN HEADER SMD R/A 3POS 1.25mm The SM03B-GHS-TB(LF)(SN) is a 3-pin, surface-mount, right-angle header connector that mates with JST GH-series wire housings. It provides a reliable, low-profile connection between a PCB and external wires using a crimp-style mating system. It belongs to the JST GH series, known for fine-pitch, compact connectors optimized for miniaturized electronics. 3-position connector (signal/power lines) 1.25 mm pitch for high-density PCB layout Surface-mount, right-angle (horizontal) mounting Shrouded header design for secure mating and alignment Locking ramp mechanism to prevent accidental disconnection Tin-plated contacts for reliable conductivity Lead-free / RoHS compliant (LF/SN finish) Current rating: ~1 A typical Voltage rating: ~50 V Operating temperature: approx. -25 °C to +85 °C 📦 Typical Applications Consumer electronics (wearables, IoT devices) Industrial control modules Robotics and sensor interfaces Battery-powered embedded systems Compact PCB interconnect systems #CommonPartsLibrary #Connector

3 Position Wire to Board Terminal Block Horizontal with Board 0.200" Screw Terminal 3-pin 5.08mm Through Hole #CommonPartsLibrary #Connector #Terminal-block #COMBICON MKDSN

8A@8/20us 54V 26.7V 24V SOT-23 ESD and Surge Protection ESD DIODE 24VWM 41VC SOT-23 PESD2CAN is a dual-line ESD protection diode designed to protect automotive Controller Area Network (CAN) bus interfaces from Electrostatic Discharge (ESD), surge events, and other transient voltage disturbances. It is housed in a compact SOT-23 package and provides protection for both CANH and CANL lines using a single device. Key Features Dual CAN bus line protection in a single SOT-23 package Maximum peak pulse power: 230 W (8/20 μs surge waveform) Low clamping voltage: 41 V at 5 A surge current Ultra-low leakage current: < 1 nA ESD protection up to 30 kV Compliant with IEC 61000-4-2 Level 4 ESD standard Compliant with IEC 61000-4-5 surge immunity standard AEC-Q101 qualified for automotive applications Reverse standoff voltage: 24 V Low capacitance (typically 25 pF) to minimize impact on CAN signal integrity Suitable for both high-speed and fault-tolerant CAN networks Typical Applications Automotive CAN bus networks Industrial CAN communication systems Automotive electronic control units (ECUs) CAN transceivers requiring ESD and surge protection Any differential communication interface exposed to external connectors Package SOT-23 (3-pin) Surface-Mount Device (SMD) package. #CommonPartsLibrary #Diode

Straight 3 pin 5mm 3-pin Pitch 5mm 15A 1.5 300V Screw terminal block 01x03 #screwblock #connector #commonPartsLibrary

Straight 3 pin 5mm 3-pin Pitch 5mm 15A 1.5 300V Screw terminal block 01x03 #screwblock #connector #commonPartsLibrary

Straight 3 pin 5mm 3-pin Pitch 5mm 15A 1.5 300V Screw terminal block 01x03 #screwblock #connector #commonPartsLibrary

Connector Header Surface Mount, Right Angle 3 position 0.047" (1.20mm) The BM03B-ACHSS-GAN-TF(LF)(SN) is a compact surface-mount (SMD) right-angle header connector from JST’s ACH series. It is designed for wire-to-board connections in space-constrained electronic devices. This component features a 3-position (3-pin) male header with a 1.2 mm pitch, making it suitable for high-density PCB layouts where small size and reliable connectivity are required. It is commonly used in consumer electronics, embedded systems, and industrial devices where compact interconnections are needed. Key Features Connector Type: Rectangular header (male pins) Mounting Type: Surface-mount (SMD), right-angle orientation Number of Positions: 3 pins Pitch: 1.2 mm (fine pitch for compact designs) Current Rating: Up to 2 A Voltage Rating: 50 V Contact Plating: Gold-plated contacts (good conductivity & corrosion resistance) Material: Heat-resistant thermoplastic, UL94V-0 rated Operating Temperature: −25 °C to +85 °C Locking Mechanism: Detent lock for secure mating Design: Shrouded (3-wall) for alignment and protection Packaging: Tape & reel (ideal for automated assembly)

TBO5002S-1LF Straight 3 pin 5mm 3-pin Pitch 5mm 15A 1.5 300V Screw terminal block 01x03 #screwblock #connector #commonPartsLibrary