QFN-104(10x10) Microcontrollers RoHS Wireless microcontroller module for embedded processing and wireless communication, designed to provide integrated compute and RF connectivity for IoT applications. #ESPRESSIF #MCUModule #WirelessModule #IoT #CommonPartsLibrary #IntegratedCircuit #microcontroller

Wi-Fi HaLow® RF Transceiver Module – IEEE 802.11ah (Wi-Fi HaLow®) RF transceiver module for sub-GHz wireless connectivity in IoT and machine-to-machine (M2M) applications. Operates over the 850 MHz to 950 MHz frequency range with data rates up to 43.3 Mbps, 26 dBm maximum transmit power, and −107 dBm receiver sensitivity. Supports 64-QAM and 256-QAM modulation, operates from a 3.1 V to 3.6 V supply, and provides GPIO, SDIO, SPI, UART, and USB interfaces. Designed with an RF pad antenna interface, specified for operation over a −40°C to +85°C temperature range, and housed in a 38-pad surface-mount module. #MorseMicro #MM8108MF15457 #WiFiHaLow #IEEE80211ah #RFModule #WirelessModule #SubGHz #IoT #M2M #SDIO #SPI #UART #USB #EmbeddedSystems

The ESP32-C3FH4 is a highly integrated wireless microcontroller designed for Internet of Things, smart devices, industrial automation, consumer electronics, and embedded connectivity applications. It combines a low-power RISC-V processor with integrated Wi-Fi and Bluetooth Low Energy connectivity, providing a cost-effective and secure platform for wireless communication and edge computing. The device incorporates embedded flash memory, advanced security features, low-power operating modes, and a rich set of peripheral interfaces, making it suitable for battery-powered and always-connected systems. Its compact design and comprehensive software ecosystem enable rapid development of connected products while maintaining high reliability and energy efficiency. The ESP32-C3FH4 is widely used in smart sensors, home automation devices, wearable electronics, industrial monitoring systems, wireless control modules, and cloud-connected embedded products. Features Integrated RISC-V microcontroller core Built-in Wi-Fi connectivity Integrated Bluetooth Low Energy support Embedded flash memory Low-power operation for battery-powered applications Hardware cryptographic acceleration Secure boot capability Flash encryption support Multiple GPIO interfaces Integrated UART, SPI, I²C, I²S, PWM, and ADC peripherals Real-time processing capability Wireless networking and cloud connectivity support OTA firmware update support Compact surface-mount package Industrial-grade reliability Electrical Characteristics Wireless microcontroller architecture Integrated RF subsystem Low-power operating modes High-performance embedded processing Secure communication support Multi-protocol wireless connectivity Flexible peripheral expansion capability Optimized power consumption for IoT devices Applications Internet of Things devices Smart home automation Wireless sensor networks Industrial monitoring systems Asset tracking devices Wearable electronics Smart appliances Remote control systems Data acquisition platforms Edge computing applications Connected consumer products Embedded wireless gateways Package Information Surface-mount package Compact footprint for embedded applications Suitable for automated assembly processes Optimized thermal and electrical performance PCB-friendly package design #commonpartslibrary #integratedcircuit #microcontroller #wirelessconnectivity #wifi #bluetoothlowenergy #iot #embeddedsystems #espressif #smartdevices #industrialautomation #edgecomputing #wirelessmodule #internetofthings #electronicsdesign #riscv #embeddedelectronics #lowpowerdesign

868/915MHz SPI SMD LoRa Module E22-900M22S is a compact, industrial-grade LoRa® wireless transceiver module developed by Ebyte, based on the Semtech SX1262 RF chipset. Operating in the 868/915 MHz ISM band, it communicates through an SPI interface and is designed for long-range, low-power wireless data transmission. The module offers excellent receiver sensitivity, strong anti-interference performance, and supports both LoRa and FSK modulation, making it suitable for smart metering, industrial automation, IoT sensor networks, remote monitoring, and wireless control applications. Key Features Based on the Semtech SX1262 LoRa transceiver Operates in the 850–930 MHz frequency range (optimized for 868/915 MHz ISM bands) SPI interface with data rates up to 10 Mbps Maximum transmit power of +22 dBm (160 mW) Receiver sensitivity up to −147 dBm (LoRa mode) Supports LoRa and FSK modulation Programmable air data rate up to 62.5 kbps (LoRa) and 300 kbps (FSK) Long communication range of up to 7 km under ideal line-of-sight conditions Wide operating voltage: 1.8 V to 3.7 V (3.3 V recommended) Ultra-low receive current (~6.8 mA) and low sleep current Industrial operating temperature: −40°C to +85°C Compact 20 × 14 × 2.8 mm SMD package with castellated pads/IPEX antenna options Suitable for IoT, AMI, smart home, industrial sensors, wireless alarms, and remote control systems. #Ebyte #E22Series #E22900M22S #SX1262 #LoRa #WirelessModule #SubGHz #SPI #IoT #IndustrialAutomation #SmartMetering #RemoteMonitoring #EmbeddedSystems #RFModule

67 Position Female Connector M.2 (NGFF) Mini Card Gold 0.020" (0.50mm) Black # Engineering Specification ## Product Name 2199230-4 ## General Description 2199230-4 is a surface mount board-edge connector designed to support standardized M.2 module interfaces, specifically configured for Key E applications used in wireless communication, embedded computing, and high-speed peripheral expansion systems. The component provides a reliable mechanical and electrical interface between a host printed circuit board and a removable or fixed M.2 module. The connector is engineered to accept gold-finger edge contacts from an M.2 module, enabling secure signal transmission for high-speed data communication, power delivery, and control signaling. Its design supports stable mechanical retention, precise alignment, and consistent electrical contact performance under repeated mating cycles. This component is widely used in industrial computing platforms, telecommunications equipment, IoT devices, and embedded system architectures where modular expansion and standardized connectivity are required. It enables flexible system design by allowing interchangeable M.2 modules for wireless communication, storage, and specialized processing functions. The design emphasizes signal integrity, mechanical durability, and compatibility with high-density PCB layouts. It is suitable for applications requiring robust high-frequency performance and reliable long-term mechanical stability. ## Functional Requirements ### Module Interface The connector shall provide a standardized interface for M.2 Key E module insertion and electrical connection. ### Signal Transmission The connector shall support high-speed electrical signal routing between host systems and M.2 modules. ### Mechanical Retention The connector shall securely retain inserted modules under vibration and operational stress conditions. ### System Modularity The connector shall enable modular expansion and replacement of functional M.2 devices within host systems. ## Electrical Requirements ### Contact Performance The connector shall provide stable electrical contact between gold-finger module pads and host PCB terminals. ### Signal Integrity The design shall support high-frequency signal transmission with minimal loss and interference. ### Power Delivery The connector shall support regulated power distribution to installed M.2 modules. ### Low Resistance Path The electrical interface shall maintain low contact resistance for reliable long-term operation. ## Mechanical Requirements ### Board Edge Mounting The connector shall be mounted on a printed circuit board to accept edge-insertion M.2 modules. ### Alignment and Fit The design shall ensure precise alignment between module contacts and connector terminals. ### Durability The connector shall withstand repeated module insertion and removal cycles without performance degradation. ### Structural Stability The assembly shall maintain mechanical integrity under vibration and operational stress conditions. ## Environmental Requirements ### Operating Conditions The connector shall operate reliably in industrial, commercial, and embedded system environments. ### Thermal Performance The device shall maintain mechanical and electrical stability under elevated operating temperatures. ### Storage and Handling The component shall retain structural and functional integrity during storage, transportation, and assembly processes. ## Quality Requirements ### Reliability The connector shall provide consistent electrical and mechanical performance throughout its operational lifetime. ### Verification Mechanical retention, contact resistance, and signal integrity shall be validated through appropriate qualification testing. ### Compliance The product shall conform to applicable standards governing M.2 interface connectors and high-speed board-edge interconnect systems. ## Documentation Requirements Technical documentation shall include footprint layout guidance, mating interface specifications, signal routing recommendations, mechanical keep-out regions, and application guidelines for M.2 system integration. ## Classification Tags #21992304 #M2Connector #M2KeyE #EdgeCardConnector #GoldFingerInterface #HighSpeedConnector #BoardEdgeConnector #WirelessModuleConnector #PCIeInterface #NGFF #EmbeddedSystems #IoTHardware #TelecomHardware #PCBDesign #MechanicalConnector #SignalIntegrity #HighFrequencyDesign #CommonPartsLibrary #ComponentLibrary #EngineeringSpecification #SystemIntegration #HardwareDesign #TEConnectivity #ModuleInterface #BoardToModule