Bluetooth Bluetooth v5.1 Transceiver Module 2.36GHz ~ 2.5GHz Integrated, Trace Surface Mount #Module #RF #Bluetooth #Ublox360 #Transceiver #Modem

NINA‑W15 modules come with pre-flashed application software, Wi-Fi (802.11b/g/n) and Bluetooth dual-mode (Bluetooth 4.2 BR/EDR and Bluetooth Low Energy). NINA-W15 has several important embedded security features, including secure boot which ensures that only authenticated software can run on the module. The modules are ideal for critical IoT applications where security is important. NINA-W156 has an internal PCB trace antenna.

MAX-M10 RF Receiver BeiDou, Galileo, GLONASS, GPS, GNSS 1.561GHz, 1.575GHz, 1.602GHz -167dBm 921.6kbps Not Included Module The MAX-M10S-00B is a professional-grade, ultra-low-power GNSS positioning module from u-blox based on the u-blox M10 platform. It is designed for battery-powered applications such as asset trackers, wearables, IoT devices, and navigation systems. The module supports simultaneous reception of multiple GNSS constellations, providing high positioning availability, fast acquisition times, and excellent sensitivity even in challenging urban or weak-signal environments. It integrates a TCXO, LNA, and SAW filter to improve RF performance while maintaining very low power consumption. Key Features Multi-constellation GNSS receiver: GPS Galileo GLONASS BeiDou QZSS SBAS support (WAAS, EGNOS, MSAS, GAGAN) Concurrent tracking of up to four GNSS constellations for improved position availability and accuracy. Ultra-low power consumption: Approximately 25 mW in continuous tracking mode, making it ideal for battery-powered devices. High RF sensitivity: Tracking sensitivity up to −167 dBm for reliable operation in weak-signal conditions. High positioning accuracy: Typical position accuracy of approximately 1.5 m CEP under suitable conditions. Navigation update rate: Up to 10 Hz for responsive tracking applications. Integrated RF front-end: Built-in LNA (Low Noise Amplifier) Built-in SAW filter Integrated TCXO for stable operation. Supports Assisted GNSS services: AssistNow Online AssistNow Offline AssistNow Autonomous CloudLocate support for low-power IoT positioning. Communication interfaces: UART I²C NMEA and UBX protocols supported. Wide operating temperature range: −40°C to +85°C. Supply voltage: 1.76 V to 3.6 V. Typical Applications Asset tracking devices Wearable electronics Fleet management systems Industrial IoT Smart meters Drone and robotics navigation Personal navigation devices Timing and synchronization systems Package Information Package Type: Surface-mount LCC module Dimensions: 9.7 mm × 10.1 mm × 2.5 mm (typical module size) #Commonpartslibrary #RF #Wireless #RFreceivers #MAXM10S #uBlox #GNSS #GPS #Galileo #GLONASS #BeiDou #QZSS #NavigationModule #GNSSModule #GPSTracking #AssetTracking #IoT #IndustrialIoT #WearableTech #FleetManagement #DroneNavigation #EmbeddedSystems #ElectronicsDesign #PCBDesign #HardwareEngineering #LowPowerDesign #LocationTracking #Geolocation #RFDesign #LNA #SMTModule

The Arduino Nano 33 IoT (ABX00027) is an advanced evaluation platform designed for IoT applications, featuring the 32 bit ARM® Cortex®-M0+ ATSAMD21G18A MCU. This board supports WiFi and Bluetooth connectivity by utilizing the Nina W102 uBlox module, making it ideal for wireless projects. It operates at a clock speed of 48MHz and uses a 3.3V logic level. The board is equipped with 22 digital I/O pins, 8 analog inputs, and supports PWM on 5 pins. It offers communication via UART, I2C and SPI. #Module #part #SAM D, Maker

Cellular 4G LTE CAT M1/NB-IoT Transceiver Module 700MHz, 750MHz, 800MHz, 850MHz, 900MHz, 1.7GHz, 1.8GHz, 1.9GHz, 2.1GHz Antenna Not Included, Castellation Surface Mount #RF-Transceiver #Module #u-blox #SARA-R4

The NEO-6M-0-001 is a compact GPS receiver module based on the high-performance u-blox 6 positioning engine. It features a 50-channel GPS receiver with fast satellite acquisition and precise positioning (about ±2.5 m) and supports standard GPS communication protocols like NMEA and u-blox UBX. The module typically operates from 2.7 V to 3.6 V, communicates via UART/SPI/I²C interfaces, and is widely used in navigation, tracking, and embedded projects where reliable global positioning data is needed. #module

# SAM-M10Q-00B Engineering Specifications **General Description** The SAM-M10Q-00B is a compact, ultra-low-power Global Navigation Satellite System receiver module manufactured by u-blox. It is designed to provide highly accurate positioning, navigation, and timing information for battery-powered and space-constrained applications. Built on the u-blox M10 positioning platform, the module supports concurrent reception of multiple satellite constellations, enabling improved positioning accuracy, faster acquisition times, and enhanced reliability in challenging environments such as urban canyons and partially obstructed outdoor locations. Its optimized power architecture significantly reduces energy consumption while maintaining continuous navigation performance. The integrated antenna architecture and compact system-in-package design simplify hardware development by reducing external component requirements. The module is suitable for asset tracking, wearable devices, Internet of Things systems, industrial monitoring equipment, smart city infrastructure, agricultural applications, and portable navigation products. Designed for high-volume embedded applications, the SAM-M10Q-00B combines advanced GNSS technology, low power consumption, and robust positioning performance in a miniature surface-mount package. **Engineering Specifications** **Manufacturer:** u-blox **Manufacturer Part Number:** SAM-M10Q-00B **Component Type:** GNSS receiver module **Technology:** Multi-constellation satellite positioning receiver **GNSS Platform:** u-blox M10 positioning technology **Navigation Function:** Global positioning, navigation, and timing **Satellite Reception:** Concurrent multi-constellation GNSS tracking **Supported Systems:** GPS, Galileo, GLONASS, BeiDou and regional augmentation services **Receiver Architecture:** High-sensitivity GNSS receiver **Positioning Capability:** Real-time location tracking and navigation **Acquisition Performance:** Fast satellite acquisition and reacquisition **Tracking Performance:** Continuous satellite tracking under dynamic conditions **Position Accuracy:** High-precision navigation performance **Sensitivity:** Optimized for weak-signal environments **Power Consumption:** Ultra-low-power operation **Power Supply Configuration:** Single-supply operation **Data Interface:** Serial communication interface for host processor integration **Communication Protocols:** Standard GNSS navigation messaging support **Integrated Features:** Embedded antenna solution and RF front-end integration **Startup Modes:** Cold start, warm start and hot start operation **Timing Capability:** Precision timing and synchronization support **Interference Mitigation:** Advanced signal-processing algorithms for improved reception **System Integration:** Designed for compact embedded applications **Environmental Performance:** Reliable operation in outdoor and industrial environments **Operating Temperature Range:** Industrial temperature range **Package Type:** System-in-package GNSS module **Mounting Style:** Surface mount technology **Package Construction:** Compact low-profile module **Environmental Compliance:** RoHS compliant and lead-free **Reliability Features:** Designed for long-term embedded operation and high-volume production **Typical Applications** Asset tracking devices Internet of Things systems Wearable electronics Portable navigation equipment Fleet management systems Smart city infrastructure Industrial monitoring equipment Agricultural positioning systems Environmental data loggers Personal tracking devices Drone navigation systems Geolocation-enabled sensors Telematics systems Logistics and transportation tracking Battery-powered embedded products #SAMM10Q00B #SAMM10Q #uBlox #GNSS #GPSModule #SatelliteNavigation #PositioningSystem #IoT #AssetTracking #WearableTechnology #EmbeddedSystems #NavigationModule #Telematics #LocationTracking #ElectronicComponents #EngineeringSpecifications

This project is a Bluetooth Low Energy (BLE) gas leakage detection system. It uses a BME680 sensor from Bosch Sensortec for gas detection and a BMD-330-A-R module from U-blox for BLE communication. It also features a user interaction button, RGB signaling LED, and is powered by two non-rechargeable AA batteries. #BLE #MCU #ReferenceDesign #Module #reusable #module #simple-embedded #ublox #sublayout

u-blox M8 Concurrent GNSS LCC Module, TCXO, flash, SAW, LNA, 12.2x16 mm #CommonPartsLibrary #RF #Transceiver #Module

High-Precision Multi-Band RTK GNSS Receiver Module – Multi-band GNSS receiver module designed for real-time kinematic (RTK) positioning, precision agriculture, surveying, autonomous robots, UAVs, industrial automation, asset tracking, and embedded navigation systems. Supports concurrent reception of GPS, Galileo, GLONASS, BeiDou, QZSS, SBAS, and NavIC signals on L1/L2/L5 frequency bands, delivering centimeter-level positioning accuracy with RTK and PPP-RTK correction services. Features up to 25 Hz navigation update rate, −167 dBm tracking sensitivity, UART, USB, I²C, and SPI host interfaces, RAW GNSS measurement output, RTCM 3.x input/output, NTRIP compatibility, time pulse output, and integrated RTK engine for high-precision positioning. Operates from a 2.7 V to 3.6 V supply, consumes approximately 0.5 W typical, and is specified for operation over a −40°C to +85°C temperature range. Packaged in a compact 54-pin LGA module (22 × 17 mm) for embedded integration. #u-blox #ZEDF9P05B #RTKGNSS #HighPrecisionGNSS #MultiBandGNSS #GPS #Galileo #BeiDou #GLONASS #Surveying #AutonomousRobotics #PrecisionAgriculture #EmbeddedSystems

High-precision multi-band GNSS receiver module supporting GPS, Galileo, GLONASS, BeiDou, and QZSS with L1/L5 signal reception and integrated RTK and PPP-RTK positioning technologies. Operates from a 2.7 V to 3.6 V supply, provides −167 dBm tracking sensitivity, and supports I²C, SPI, UART, and USB host interfaces. Housed in a 54-pin LGA package (22 × 17 mm) and specified for an operating temperature range of −40°C to +85°C. #uBlox #ZEDF9P #ZEDF9P15B #GNSS #GNSSReceiver #RTK #PPPRTK #GPS #Galileo #GLONASS #BeiDou #QZSS #L1 #L5 #I2C #SPI #UART #USB #LGA54 #EmbeddedSystems

This project is a BLE door and window sensor design that uses a U-blox BMD-330-A-R for BLE communication, a reed switch as a sensor, a multi-color LED for status display, and is powered by VBAT. There's also a programming interface and reset switch included. #WiFi #BLE #MCU #ReferenceDesign #Module #reusable #module #simple-embedded #ublox #sublayout

u-blox MAX-F10S high-precision dual-band GNSS receiver module based on u-blox F10 technology, supporting simultaneous L1 and L5 GNSS signals with advanced multipath mitigation for meter-level positioning accuracy in urban environments. Features configurable 1PPS time pulse output (0.25Hz to 10MHz), 30ns RMS timing accuracy, operation up to 80,000m altitude and 500m/s velocity, designed for navigation, asset tracking, timing synchronization, industrial positioning and IoT applications. Search Keywords: MAX-F10S, u-blox MAX-F10S, F10 GNSS receiver, dual band GNSS module, L1 L5 GNSS receiver, high precision GPS module, u-blox F10, GNSS timing module, 1PPS GNSS receiver, GPS Galileo GLONASS BeiDou receiver, positioning module, navigation module Hashtags: #MAXF10S #uBlox #GNSS #GPSModule #DualBandGNSS #L1L5GNSS #GNSSReceiver #NavigationModule #PositioningModule #AssetTracking #TimePulse #1PPS #GPSReceiver #Galileo #BeiDou #GLONASS #HighPrecisionGNSS #uBloxF10

GY-NEO6MV2 board features the u-blox NEO-6M GPS module

U-Blox MAX-7 RF Receiver GLONASS, GNSS, GPS 1.575GHz -158dBm