Surge Protective Devices SPD are designed to protect against transient surge conditions. Large single surge events, such as lightning.

50V Bidirectional 5V 0402 ESD and Surge Protection (TVS/ESD) ROHS #TVS #Diode #Surge-Protection

SURGE STOPPER W/DIODE 4 - 80V 14-DFN #Commonpartslibrary #Integratedcircuit #Powermanagement #Gatedrivers

LVDS Digital Isolator 5700Vrms 4 Channel 2.5Gbps 40kV/µs CMTI 32-WFQFN Exposed Pad, CSP The ADN4624 is a quad-channel, signal isolated, low voltage differential signaling (LVDS) buffer that operates at up to 2.5 Gbps with very low jitter. The device integrates Analog Devices, Inc., iCoupler® technology, enhanced for high speed operation to provide drop-in galvanic isolation of LVDS signal chains. AC coupling and/or level shifting to the LVDS receivers and from the LVDS drivers allows isolation of other high speed signals such as current mode logic (CML). The ADN4624 includes a refresh mechanism to monitor the input and output states and ensure they remain the same in the absence of data transitions (for example, at power-on). For lower power consumption and high speed operation with low jitter, the LVDS and isolator circuits rely on 1.8 V supplies. The ADN4624 is fully specified over a wide industrial temperature range and is available in a 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance (for 5.7 kV rms or 8 kVPEAK surge and impulse voltages and reinforced insulation at ac mains voltages) or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance (for basic/functional isolation). FEATURES ► 5.7 kV rms and 1.5 kV rms LVDS isolators ► Complies with TIA/EIA-644-A LVDS signal levels ► Quad-channel configuration ► Any data rate up to 2.5 Gbps switching with low jitter ► 10 Gbps total bandwidth across four channels ► 2.15 ns typical propagation delay ► Typical jitter: 0.82 ps rms random, 40 ps total peak ► Lower power 1.8 V supplies ► ±8 kV IEC 61000-4-2 ESD protection across isolation barrier ► High common-mode transient immunity: 100 kV/μs typical ► Safety and regulatory approvals (28-lead SOIC_W_FP package) ► UL (pending): 5700 V rms for 1 minute per UL 1577 ► CSA Component Acceptance Notice 5A (pending) ► VDE certificate of conformity (pending) ► DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 ► VIORM = 849 VPEAK (working voltage) ► Enable or disable refresh (low speed output correctness check) ► Operating temperature range: −40°C to +125°C ► 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance APPLICATIONS ► Isolated video and imaging data ► Analog front-end isolation ► Data plane isolation ► Isolated high speed clock and data links ► Multi-gigabit serialization/deserialization (SERDES) ► Board-to-board optical replacement (for example, short reach fiber) #CommonPartsLibrary #Isolator #ADN4624BCPZ #AnalogDevices #LVDS #DigitalIsolator #GalvanicIsolation #HighSpeedCommunication #SERDES

Thyristor Surge Suppressors (TSS) TISP4180J3BJR-S DO-214AA_L4.4-W3.6-LS5.3-BI LCSC Part Number: C2667300 JLCPCB Part Class: undefined Manufactured by BOURNS

Thyristor Surge Suppressors (TSS) P2600SDLRP DO-214AA_L4.6-W3.6-BI LCSC Part Number: C2667516 JLCPCB Part Class: undefined Manufactured by Littelfuse(美国力特)

Thyristor Surge Suppressors (TSS) TISP4115H3BJR-S DO-214AA_L4.4-W3.6-LS5.3-BI LCSC Part Number: C2667350 JLCPCB Part Class: undefined Manufactured by BOURNS

Thyristor Surge Suppressors (TSS) P0300S3NLRP SMC_L7.1-W6.2-LS8.1-BI LCSC Part Number: C2667660 JLCPCB Part Class: undefined Manufactured by Littelfuse(美国力特)

Thyristor Surge Suppressors (TSS) P1300SALRP DO-214AA_L4.4-W3.6-LS5.3-BI LCSC Part Number: C2667489 JLCPCB Part Class: undefined Manufactured by Littelfuse(美国力特)

Diode 40 V 3A Surface Mount SMB Schottky diode 3A 40V SMB The B340B-13-F is a surface-mount Schottky barrier rectifier diode designed for efficient power rectification in low-voltage, high-frequency applications. It features low forward voltage drop and fast switching capability, making it suitable for DC-DC converters, power supplies, reverse polarity protection, and freewheeling diode applications. The device is housed in a compact SMB (DO-214AA) package, enabling high current handling in space-constrained designs. ELECTRICAL CHARACTERISTICS Reverse Voltage (VRRM): 40 V Average Forward Current (IF(AV)): 3 A Forward Voltage (VF): 0.5 V (typical at IF = 3 A) Reverse Leakage Current (IR): 0.5 mA (max at VR = 40 V, 25°C) Peak Surge Current (IFSM): 80 A (8.3 ms single half sine wave) THERMAL CHARACTERISTICS Operating Junction Temperature Range: -55°C to +150°C Storage Temperature Range: -55°C to +150°C Thermal Resistance Junction-to-Ambient (RθJA): ~75 °C/W MECHANICAL CHARACTERISTICS Package Type: SMB (DO-214AA) Mounting Type: Surface Mount (SMD) Polarity: Cathode marked by band Weight: ~0.1 g FEATURES Low forward voltage drop for improved efficiency High surge current capability Fast switching speed Low power loss and high reliability Compact SMB package for space-saving PCB layout RoHS compliant and halogen-free APPLICATIONS Switch-mode power supplies (SMPS) DC-DC converters Reverse polarity protection circuits Freewheeling and clamping diodes Battery charging circuits MANUFACTURER / PART DETAILS Manufacturer: Diodes Incorporated Part Number: B340B-13-F Package Code: SMB (DO-214AA) #Diode #Rectifier #Single-Diode #SCHOTTKY #B340

SMAJ5.0A-Q is an automotive-grade, unidirectional Transient Voltage Suppressor (TVS) diode from Bourns. It is designed to protect sensitive electronic circuits from Electrostatic Discharge (ESD), Electrical Fast Transients (EFT), lightning-induced surges, and other transient overvoltage events. The device is commonly used on 5 V power rails and communication interfaces in automotive, industrial, and telecom applications. Key Features Unidirectional TVS diode for DC line protection. 5 V reverse standoff voltage (VRWM) suitable for 5 V systems. 6.4 V minimum breakdown voltage (VBR). 9.2 V maximum clamping voltage (VC) at peak pulse current. 400 W peak pulse power dissipation (10/1000 μs waveform). 43.5 A peak pulse current (IPP) capability. AEC-Q101 qualified for automotive applications. Fast response time (<1 ps typical) for effective transient suppression. Wide operating temperature range: -55°C to +150°C. Surface-mount DO-214AC (SMA) package for compact PCB designs. RoHS compliant and suitable for automated assembly processes. Typical Applications Automotive ECUs and power rails 5 V power supplies Telecom equipment Industrial control systems I/O ports and communication interfaces Consumer electronics requiring surge protection #CommonPartsLibrary #Diode

33V (Typ) Clamp 2.7A (8/20µs) Ipp Tvs Diode Surface Mount 2-X1SON (1x0.6) The ESD601-Q1 is a bidirectional ESD protection diode. The ESD601-Q1 is offered in the industry standard 0402 (DPY) package, and offers an IEC 61000-4-2 protection level of 15kV. The device can clamp 8/20μs surges with peak pulse currents up to 2.7A in accordance with the IEC 61000-4-5 standard. The low capacitance and low leakage current provide protection against transient events in a variety of systems and applications. This protection is key for many applications, such as smaller form factors and faster data speeds, which are becoming more popular over time. Features • IEC 61000-4-2 ESD Protection: – ±15kV contact discharge – ±15kV air gap discharge • ISO 10605 (330pF, 330Ω) ESD Protection: – ±12kV contact discharge – ±15kV air-gap discharge • IEC 61000-4-5 surge protection: – 2.7A (8/20µs) • I/O capacitance: 0.3pF (typical) • Ultra low leakage current: 1nA (typical) • Low dynamic resistance 0.9Ω (typical) • Industry standard 0402 package 2 Applications • Automotive Antenna ESD Protection • RF Signal ESD Protection • Near Field Communications (NFC) • Automotive SerDes w/Power over Coax • USB Type-C (short-to-Vbus tolerant) #CommonPartsLibrary #Diode #TVS

Diode Array 1 Pair Common Cathode 200 V 15A Through Hole TO-220-3 The V30202C-M3/4W is a surface-mount Schottky barrier rectifier designed for high-efficiency power conversion and fast switching applications. It features a low forward voltage drop and high surge current capability, making it suitable for switching power supplies, DC-DC converters, freewheeling diodes, and polarity protection circuits. The device is housed in a compact DO-214AB (SMC) package, enabling high power density and reliable thermal performance in space-constrained designs. Key Features Schottky barrier technology for fast switching Low forward voltage drop for improved efficiency High forward current capability Low power loss and high reliability High surge current capability Surface-mount DO-214AB (SMC) package RoHS compliant and halogen-free Absolute Maximum Ratings Repetitive peak reverse voltage: 200 V Average forward rectified current: 30 A Non-repetitive peak surge current: 300 A Operating junction temperature range: -55°C to +150°C Storage temperature range: -55°C to +150°C Electrical Characteristics Forward voltage drop: approximately 0.85 V at rated current Reverse leakage current: low, typically in the mA range at rated voltage Reverse recovery time: negligible (Schottky device) Thermal resistance junction-to-case: low for efficient heat dissipation Mechanical Characteristics Package type: DO-214AB (SMC) Mounting type: Surface mount Polarity: Cathode band marking Terminal finish: Solderable, compatible with reflow processes Applications Switching power supplies DC-DC converters Freewheeling and clamping diodes Reverse polarity protection Battery-powered systems Automotive and industrial power circuits Pin Configuration Anode: Connected to the device substrate Cathode: Marked terminal (banded side) #CommonPartLibrary #Diode #Rectifier #DiodeArray

Diode 40 V 5A Surface Mount DO-214AB (SMC) The SSC54-E3/57T is a surface-mount Schottky barrier rectifier diode manufactured by Vishay Intertechnology . It is designed for high-efficiency power rectification applications requiring low forward voltage drop and fast switching performance. This diode is commonly used in DC-DC converters, switching power supplies, polarity protection circuits, and freewheeling applications. The device comes in a compact DO-214AB (SMC) package suitable for automated PCB assembly. Key Features Schottky barrier rectifier technology Maximum repetitive reverse voltage: 40 V Average forward current: 5 A Very low forward voltage drop (~0.49 V max) High surge current capability up to 175 A Fast switching speed with low power loss Surface-mount DO-214AB (SMC) package Operating junction temperature up to 150°C Matte tin-plated terminals, RoHS compliant Suitable for high-frequency power conversion applications #CommonPartsLibrary #Diode

SURGE STOPPER W/DIODE 4 - 80V 16-MSOP #Commonpartslibrary #Integratedcircuit #Powermanagement #Gatedrivers

Bridge Rectifier Single Phase Standard 100 V Surface Mount 4-MiniDIP The HD01-T is a compact, high-reliability rectifier diode bridge designed for general-purpose AC-to-DC conversion applications. It integrates four diodes in a single package to provide full-wave rectification, making it suitable for power supply circuits, battery chargers, and low-power AC input stages. The device is optimized for space-constrained PCB designs while maintaining adequate current handling and voltage blocking capability. Key Features Single-phase full-wave bridge rectifier Compact through-hole package High surge current capability Low forward voltage drop Reliable and robust construction Suitable for automated assembly Electrical Characteristics Maximum Ratings Repetitive Peak Reverse Voltage: typically up to 100 V Average Forward Rectified Current: typically up to 1 A Peak Forward Surge Current: high surge tolerance for transient conditions Forward Characteristics Forward Voltage Drop: low, typically around 1.0 V per diode at rated current Reverse Characteristics Reverse Leakage Current: low under rated reverse voltage conditions Mechanical Characteristics Package Type: HD (through-hole, compact square package) Mounting: Through-hole PCB mounting Lead Configuration: 4-pin (AC, AC, +, −) Encapsulation: Molded plastic body for insulation and durability #commonpartslibrary #diodes #bridgerectifier

Single-Channel ESD Protection TVS Diode – Bidirectional transient voltage suppressor (TVS) diode for ESD protection of USB, GPIO, data lines, and other low-voltage high-speed interfaces. Features a 5.5 V reverse standoff voltage (VRWM), 6 V minimum breakdown voltage, 14 V maximum clamping voltage at 1 A, and ±30 kV IEC 61000-4-2 contact and air-gap ESD protection. Provides 6 A (8/20 µs) surge current capability, 12 pF typical capacitance, 100 nA maximum leakage current, and 0.4 Ω typical dynamic resistance. Operates over a −40°C to +125°C temperature range and is housed in a 2-pin SOT-523 (DYA) package. #TexasInstruments #TPD1E10B06DYAR #TPD1E10B06 #TVSDiode #ESDProtection #TransientVoltageSuppressor #CircuitProtection #USBProtection #GPIOProtection #SurgeProtection #SOT523 #EmbeddedSystems

5.7 kV RMS/1.5 kV RMS, Quad-Channel LVDS 2.5 Gigabit Isolator (0 Reverse Channels) LVDS Digital Isolator 5700Vrms 4 Channel 2.5Gbps 40kV/µs CMTI 28-BSSOP (0.295", 7.50mm Width) The ADN4624 is a quad-channel, signal isolated, low voltage differential signaling (LVDS) buffer that operates at up to 2.5 Gbps with very low jitter. The device integrates Analog Devices, Inc., iCoupler® technology, enhanced for high speed operation to provide drop-in galvanic isolation of LVDS signal chains. AC coupling and/or level shifting to the LVDS receivers and from the LVDS drivers allows isolation of other high speed signals such as current mode logic (CML). The ADN4624 includes a refresh mechanism to monitor the input and output states and ensure they remain the same in the absence of data transitions (for example, at power-on). For lower power consumption and high speed operation with low jitter, the LVDS and isolator circuits rely on 1.8 V supplies. The ADN4624 is fully specified over a wide industrial temperature range and is available in a 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance (for 5.7 kV rms or 8 kVPEAK surge and impulse voltages and reinforced insulation at ac mains voltages) or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance (for basic/functional isolation). FEATURES ► 5.7 kV rms and 1.5 kV rms LVDS isolators ► Complies with TIA/EIA-644-A LVDS signal levels ► Quad-channel configuration ► Any data rate up to 2.5 Gbps switching with low jitter ► 10 Gbps total bandwidth across four channels ► 2.15 ns typical propagation delay ► Typical jitter: 0.82 ps rms random, 40 ps total peak ► Lower power 1.8 V supplies ► ±8 kV IEC 61000-4-2 ESD protection across isolation barrier ► High common-mode transient immunity: 100 kV/μs typical ► Safety and regulatory approvals (28-lead SOIC_W_FP package) ► UL (pending): 5700 V rms for 1 minute per UL 1577 ► CSA Component Acceptance Notice 5A (pending) ► VDE certificate of conformity (pending) ► DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 ► VIORM = 849 VPEAK (working voltage) ► Enable or disable refresh (low speed output correctness check) ► Operating temperature range: −40°C to +125°C ► 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance APPLICATIONS ► Isolated video and imaging data ► Analog front-end isolation ► Data plane isolation ► Isolated high speed clock and data links ► Multi-gigabit serialization/deserialization (SERDES) ► Board-to-board optical replacement (for example, short reach fiber) #CommonPartsLibrary #ADN4624BRNZ #DigitalIsolator #LVDS #AnalogDevices #HighSpeedInterface #GalvanicIsolation #LVDSIsolator #DigitalIsolation #IndustrialElectronics #HighSpeedData #SERDES #SignalIntegrity #EmbeddedSystems #ElectronicsDesign #InterfaceICs

Flat, 5 mm 2 Form C, 2 A, relays Telecom Relay DPDT (2 Form C) Surface Mount The TQ2SA-L2-3V-Z is a compact surface-mount DPDT (2 Form C) telecom/signal relay from Panasonic Industry designed for low-power switching applications. It features a dual-coil latching mechanism, allowing the relay to maintain its state without continuous coil power, making it suitable for battery-powered and energy-efficient systems. This relay is commonly used in telecommunications equipment, industrial controls, measurement devices, and embedded electronic systems. Key Features DPDT (2 Form C) contact configuration 3V DC dual-coil latching relay Low power consumption: approximately 140 mW Compact SMD package: only 5.6 mm height Surface-mount gull-wing terminals Sealed construction for automatic washing compatibility High switching capability: up to 2 A Wide switching voltage range: up to 125 VAC / 220 VDC Fast operate/release time: approx. 4 ms High dielectric strength and surge resistance Wide operating temperature: −40°C to +85°C Gold-clad AgNi contacts for reliable low-level signal switching Tape-and-reel packaging (“Z” suffix) for automated assembly #CommonPartsLibrary #relay

SURGE STOPPER W/DIODE 4 - 80V 16-SOIC #Commonpartslibrary #Integratedcircuit #Powermanagement #Gatedrivers

IGBT 460 V 20 A 107 W Surface Mount LPDS #CommonPartsLibrary #Transistor #IGBT The RGPR20NS43HRTL specification defines the engineering requirements for an ultrafast recovery power rectifier designed for high-efficiency power conversion and switching applications. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure reliable rectification performance, low switching losses, and long-term operational stability in power electronic systems. The device is intended for use in switch-mode power supplies, power factor correction circuits, motor drives, industrial power equipment, and other high-frequency power conversion applications. It provides efficient current rectification with fast reverse recovery characteristics, enabling improved system efficiency and reduced electromagnetic interference in demanding electrical environments. Engineering Requirements The rectifier shall be manufactured using qualified semiconductor fabrication processes and high-quality materials to ensure consistent electrical performance, thermal stability, and long service life. The device shall maintain reliable operation under specified voltage, current, and temperature conditions without degradation of functional performance. Electrical characteristics shall provide low forward voltage drop, fast reverse recovery time, and high surge current capability to support efficient high-frequency switching applications. The device shall maintain stable electrical behavior under repetitive switching cycles and transient operating conditions. Thermal performance shall support effective heat dissipation through the package structure and recommended mounting configuration. The component shall operate within specified junction temperature limits while maintaining electrical integrity and long-term reliability under continuous or intermittent load conditions. Mechanical construction shall be suitable for standard surface-mount or through-hole assembly, depending on the package configuration, and shall withstand soldering, handling, vibration, and thermal cycling without mechanical degradation. Workmanship shall be free from defects including contamination, cracks, bond failures, corrosion, or structural inconsistencies that could adversely affect electrical or mechanical performance. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with all applicable engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process. Documentation Supporting documentation shall include engineering drawings, electrical performance data, thermal characterization reports, qualification records, inspection reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before implementation to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #PowerRectifier #UltrafastRecoveryDiode #PowerElectronics #SwitchModePowerSupply #IndustrialElectronics #Semiconductor #ThermalManagement #QualityAssurance #EngineeringDocumentation