Raspberrypi Pico-based sampler, sequencer + drum machine w/ an embedded speaker, Adafruit I2S amplifier and momentary step switches, evoking the tr808 synthesizer ⁠

20-W MONO CLASS-D AUDIO POWER AMPLIFIER with terminal block connector for a speaker #audioDevices

sEMG-DAQ is a wearable 6 channel data acquisition unit for capturing surface electromyographic (sEMG) signals from human arm muscles using SJ2-3593D jack connectors while conditioning, digitizing, processing and transmitting them as sEMG data to an external AI accelerated board through an SM12B-SRSS IDC connector where AI models are run for various applications including robotic control, muscle signals medical assessment and gesture recognition. The board leverages an INA125P instrumentation amplifier together with filter stages utilizing LM324QT op-amps for conditioning and an STM32G4A1VET6 microcontroller for the digitization, processing and data transmission of the signals. Since AI models can only be as good as the data, the design of such a DAQ is necessary to ensure clean, reliable and real-time data for AI applications requiring sEMG data. The board also has USB-FS and JTAG to cater for debugging. The power (5V) is fed through a screw terminal and is regulated by two LDK320AM LDO regulators to offer 5V, 3.3V and 1.8V to meet the requirements of various components on the board.

This project is a Signal Generator, designed to output waveforms such as sine, square and triangular waves. It leverages the capabilities of operational amplifiers (op-amps) like the LMV321 in combination with resistors and capacitors to shape the output signals. The design benefits from the op-amps' negative feedback to stabilize and regulate the signal output. #project #LMV321

The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you’ll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection.

50-W Stereo Analog Input Class-D Audio Amplifier with a small number of external components mounted on a circuit board that can be used to directly drive a speaker with an external analog audio source as the input; can also be configured as a 100-W, Class-D mono audio amplifier in PBTL mode.

Adafruit MAX31865 RTD PT100 or PT1000 Amplifier #MAX31865 #Adafruit #Amplifier #PT100 #PT1000 #referenceDesign #project

I'm building an audio amplifier. These are the project requirements: - Type of Amplifier: Class D (for energy efficiency). - Input Source: Line-level input from a standard audio source, e.g., mobile phone or PC. - Output Power: 10W per channel (for a stereo setup). - Number of Channels: 2 (stereo output). - Distortion: Total Harmonic Distortion (THD) of less than 0.1% at full power. - Frequency Response: 20Hz to 20kHz. - Power Supply: Operate from a single 12V DC source. - Protection: Over-current and thermal protection for the amplifier IC. - Connectivity: Standard 3.5mm audio jack for input and screw terminals for speaker outputs. - Volume Control: A physical potentiometer for volume control. - Indicator: An LED indicator that shows power ON status. - Size Constraints: PCB size should not exceed 100mm x 100mm. Consider every requirement individually when answering any question

Internet Radio (Mono for now) using MAX98357A Class D Amplifier.

Raspberrypi Pico-based sampler, sequencer + drum machine w/ an embedded speaker, Adafruit I2S amplifier and momentary step switches, evoking the tr808 synthesizer ⁠

This compact breakout board makes it easy to add high-quality audio output to your microcontroller projects using the MAX98357A/B Class D audio amplifier. Perfect for Arduino, ESP32, Raspberry Pi, or any microcontroller with I2S output capabilities. Features High-Performance Audio: Delivers Class AB audio quality with Class D efficiency (92% efficient at 1W) Powerful Output: 3.2W into 4Ω speakers at 5V supply Clean Sound: Low distortion (0.013% THD+N at 1kHz) Wide Supply Range: Operates from 2.5V to 5.5V Simplified I2S Interface: No MCLK required, just BCLK, LRCLK, and DIN Selectable Gain: Solder jumpers for easy gain selection (3dB, 6dB, 9dB, 12dB, or 15dB) Channel Selection: Configure for left, right, or combined (mono) output Filterless Design: No need for external output filtering components Compact Form Factor: Minimal board space with optimized layout Applications Smart speakers and voice assistants Portable audio devices IoT audio projects Gaming devices and sound effects Educational audio projects Digital instrument amplification The FLUX MAX98357 breakout board requires only three I/O pins plus power, making it the perfect audio solution for projects where simplicity and sound quality matter.

Use this Copilot's template to design audio applications like amplifiers, mixers, processors, etc. Modify project requirement properties to adapt to specific needs. #template #project-template

Amplifier circuit for the Orion Team.

Amplifier circuit tpa3140d2pwp

The AD8495 K-type thermocouple amplifier from Analog Devices is so easy to use, we documented the whole thing on the back of the tiny PCB. Power the board with 3-18VDC and measure the output voltage on the OUT pin. You can easily convert the voltage to temperature with the following equation: Temperature = (Vout - 1.25) / 0.005 V. So for example, if the voltage is 1.5VDC, the temperature is (1.5 - 1.25) / 0.005 = 50°C with terminal block connections

This is a common base little-known amplifier using a BJT. This type is used at high frequencies. #BJT #amplifier #commonBase

100 W, 7–55 MHz Broadband Class‑AB RF Power Amplifier for Yaesu FT‑818 with 50 Ω I/O, 13.8 V/15 A Supply, Relay T/R Switching, PTT/ALC Interface, Selectable 5th‑Order Chebyshev LPF Bank, and Overtemperature‑Controlled Fan Support

Welcome to your new project. Imagine what you can build here.

This system was developed as part of a research project of the Ward Lab. It is to be used with a stimulus isolation adaptor from BIOPAC, more specifically one of the models that provide isolated voltage: https://www.biopac.com/product/stimulus-isolation-adapters/

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.