Isolated Module DC DC Converter 2 Output 15V -15V 170mA, 170mA 4.5V - 9V Input The REC5-0515DRW/H6/C/SMD-R specification defines the engineering requirements for an isolated DC-DC converter module designed for regulated power conversion in compact electronic systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure stable voltage conversion, reliable isolation, and long-term operational performance. The device is intended for use in embedded systems, industrial control equipment, communication modules, and distributed power architectures where isolated power rails are required. It provides regulated output power from a DC input source while maintaining galvanic isolation between input and output stages to enhance system safety and signal integrity. Engineering Requirements The power module shall be manufactured using controlled electronic assembly processes and high-reliability components to ensure stable conversion efficiency and consistent output regulation. The internal architecture shall support isolated power transfer with stable performance under defined load and environmental conditions. Electrical characteristics shall ensure stable output regulation, low output ripple, and reliable transient response during load variation. The device shall maintain consistent performance across its intended operating temperature range and input voltage variation conditions. Isolation performance shall ensure electrical separation between input and output circuits to protect downstream electronics and maintain system safety requirements. The module shall withstand electrical stress conditions defined by applicable safety and reliability standards. Thermal performance shall support continuous operation without degradation of output regulation or reliability under rated operating conditions. The device shall be suitable for PCB mounting and shall maintain structural integrity during soldering and long-term operation. Workmanship shall be free from defects such as contamination, cracks, soldering defects, or structural irregularities that could affect electrical performance or mechanical reliability. Manufacturing and inspection shall be performed using controlled processes and calibrated equipment. Any deviation from this specification shall require formal engineering review, documented justification, and approval through established engineering change control procedures. Documentation Supporting documentation shall include datasheets, electrical performance reports, isolation certification data, qualification test records, inspection reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems. Revision Control All changes to this specification shall be managed through the formal engineering change control system. Each revision shall undergo technical validation and approval prior to release to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #DCDCConverter #PowerModule #IsolatedPower #PowerElectronics #EmbeddedSystems #IndustrialElectronics #PowerSupply #QualityAssurance #EngineeringDocumentation

Isolated DC-DC Converter Module – 3 W regulated isolated DC-DC converter for industrial automation, instrumentation, telecommunications, process control, and embedded power applications. Accepts a 9 V to 27 V DC input (3:1 input range) and provides dual ±15 V regulated outputs at ±100 mA, delivering 3 W maximum output power. Features 3 kVDC input-to-output isolation, up to 83% efficiency, remote ON/OFF control, continuous short-circuit protection, low ripple and noise, and no minimum load requirement for reliable isolated power conversion. Designed for through-hole PCB mounting in an SIP-8 package, it operates over a −40°C to +71°C temperature range and complies with IEC/EN/UL 60950-1 safety standards and RoHS requirements. #RECOM #RS32415DZH3 #RS3Series #DCDCConverter #IsolatedPower #DualOutput #15VPowerSupply #3WConverter #IndustrialPower #EmbeddedPower #SIP8 #EmbeddedSystems

Metallic Case - 1 500 VDC Isolation, Hi-Rel DC-DC Converter The MGDS-04-J-C/M/S is a high-reliability 4 W isolated DC-DC converter module designed for demanding industrial, transportation, military, and aerospace applications. It belongs to the MGDS-04 series and features a 16–40 VDC input range (J input code), a regulated 5 VDC single output (C output code), and galvanic isolation between the input and output. The /S suffix indicates that the module undergoes screening and serialization for enhanced reliability and traceability, making it suitable for mission-critical systems. Key Features 4 W isolated DC-DC converter Wide 16–40 VDC input voltage range Regulated 5 VDC single output High-efficiency power conversion Input-to-output galvanic isolation Designed for industrial, defense, aerospace, and transportation applications Built-in protection features (including short-circuit protection) Compact encapsulated module for PCB mounting /S option provides screening and serialization for improved quality assurance and traceability #DCDCConverter #PowerModule #IsolatedPower #IndustrialElectronics #Aerospace #MilitaryElectronics #EmbeddedSystems #PowerSupply #HighReliability #PCBDesign

The B0505S-1WR3 is a compact isolated DC-DC power converter module designed to provide regulated power conversion while maintaining galvanic isolation between input and output circuits. The module incorporates high-frequency switching technology and transformer isolation to deliver stable power with reduced noise coupling and improved system safety. It is widely used in industrial control systems, communication equipment, instrumentation, data acquisition devices, medical electronics, and embedded applications where isolated power rails are required to eliminate ground loops and enhance signal integrity. Engineering Specification Device Type Isolated DC-DC Converter Module Power Conversion Topology Transformer-Isolated Switching Regulator Input Configuration Single DC Input Output Configuration Single Isolated DC Output Isolation Method Internal High-Frequency Transformer Isolation Regulation Characteristics Regulated Output Voltage High Conversion Efficiency Low Output Ripple and Noise Electrical Features Galvanic Isolation Between Input and Output Enhanced Noise Immunity Stable Load Regulation Reliable Power Transfer Performance Protection Characteristics Short-Circuit Resistant Design Input-to-Output Isolation Protection Thermal Reliability Enhancement Package Style Single In-Line Through-Hole Package Mounting Type Through-Hole Mounting Environmental Characteristics Industrial-Grade Reliability Long Operational Lifetime High Resistance to Electrical Interference Suitable for Harsh Operating Environments Applications Industrial Automation Equipment Data Acquisition Systems Sensor Signal Conditioning Communication Interfaces Medical Electronics Embedded Control Systems Power Supply Isolation Instrumentation Equipment Process Control Devices Microcontroller-Based Systems Features Compact Integrated Module Isolated Power Distribution High Reliability Design Low Electromagnetic Interference Simple Circuit Integration Efficient Power Conversion Stable Output Performance Wide Application Compatibility RoHS Compliant Construction Manufacturer MORNSUN #commonpartslibrary #powermodule #dcdcconverter #isolatedpower #galvanicisolation #powermanagement #powersupply #powerelectronics #industrialelectronics #instrumentation #communications #embeddedsystems #medicalelectronics #throughhole #electroniccomponents

DC-DC modular power supply, fixed voltage input, isolated non-regulated single-channel output The B0505S-1W is an isolated DC-to-DC converter module designed to provide regulated power conversion with galvanic isolation between input and output stages. This compact power module is commonly used in industrial control systems, embedded electronics, communication equipment, instrumentation, and distributed power architectures where electrical isolation and stable voltage conversion are required. The device converts a nominal DC input voltage to an isolated DC output voltage while maintaining low power consumption and reliable operation. Its fully encapsulated construction enhances thermal performance, electrical insulation, and environmental durability. The B0505S-1W is widely used for noise isolation, ground loop elimination, signal conditioning support, and isolated power distribution in sensitive electronic systems. Engineering Specification Device Type Isolated DC-to-DC power converter module Conversion Topology Fixed-input isolated regulated power conversion Isolation Feature Galvanic isolation between input and output Input Characteristics Designed for nominal low-voltage DC input operation Output Characteristics Regulated isolated DC voltage output Output Power Low-power isolated converter suitable for embedded systems Efficiency Characteristics Optimized power conversion efficiency for compact electronic applications Package Type Encapsulated SIP through-hole module Mounting Style Through-hole mounting Protection Features Isolation protection and stable power conversion characteristics Thermal Characteristics Low thermal dissipation with compact module structure Reliability Features Industrial-grade encapsulated construction for long-term operation Applications Industrial automation Embedded systems Communication equipment Sensor isolation Signal conditioning Data acquisition systems Medical electronics Power distribution networks Ground loop isolation Instrumentation systems Manufacturer Commonly manufactured by Mornsun and compatible power module vendors #commonpartslibrary #dcdcconverter #isolatedconverter #powermodule #powerelectronics #isolatedpower #embeddedhardware #industrialelectronics #powersupply #signalisolation #throughholecomponents #electronicsdesign #powerconversion #galvanicisolation

Isolated IEEE 802.3af PoE Powered Device (PD) DC-DC Converter Module – High-efficiency isolated Power over Ethernet (PoE) DC-DC converter module designed for IP cameras, VoIP phones, wireless access points, industrial Ethernet devices, IoT gateways, embedded networking equipment, and PoE-powered systems. Delivers a regulated 5 V output at up to 5.1 A (25.5 W) from a 37 V to 57 V PoE input, compliant with IEEE 802.3af PoE Powered Device (PD) requirements. Features 2.25 kVDC input-to-output isolation, up to 90.5% efficiency, low ripple and noise (150 mVp-p max), integrated PoE interface, overcurrent, overvoltage, and short-circuit protection, and support for T2P and adapter OR-ing. Designed for surface-mount assembly in a compact 35.5 × 22.4 × 10.6 mm module, it operates over a −40°C to +85°C temperature range, making it ideal for commercial and industrial embedded power applications. #MurataPowerSolutions #MYBSP0055AABFT #PoEConverter #DCDCConverter #PowerOverEthernet #IEEE8023af #IsolatedPowerModule #IndustrialEthernet #EmbeddedPower #IoT #SurfaceMount #EmbeddedSystems