Pressure Sensor ±0.04PSI (±0.25kPa) Differential Male - 0.08" (1.93mm) Tube, Dual 12 b 8-DIP (0.524", 13.30mm), Dual Ports, Same Side Excellent — full picture confirmed from multiple sources. The HSCDRRN001ND2A5 is a TruStability HSC Series high accuracy digital I²C sensor with address 0x28, DIP package, dual radial barbed ports on the same side, differential pressure type, rated for ±1 inH₂O, operating on a 5.0 Vdc supply. Here's the complete spec. HIROSE Electric Engineering Specification — HSCDRRN001ND2A5 Manufacturer: Honeywell Sensing and Productivity Solutions Device Family: TruStability HSC Series General Description The HSCDRRN001ND2A5 is a high-accuracy, fully compensated and amplified differential pressure sensor manufactured by Honeywell, belonging to the TruStability HSC Series of board-mount pressure sensing devices. The device is built around a piezoresistive silicon sensing element housed within a ceramic package, combining a mature and proven sensing principle with advanced on-chip signal conditioning that makes the device ready for direct interfacing with a host microcontroller or processor without requiring extensive external analog signal processing circuitry. The defining characteristic of the TruStability HSC series, and of this device in particular, is its fully calibrated and temperature-compensated output, achieved through an integrated application-specific integrated circuit that corrects for sensor offset, sensitivity drift, temperature effects, and pressure nonlinearity across the device's rated operating range. This level of factory compensation allows the device to maintain its specified accuracy across the full compensated temperature range without requiring individual board-level calibration, significantly simplifying the design and production process for equipment that relies on precise low-pressure measurement. This particular configuration uses a digital I²C output interface, communicating pressure readings as high-resolution digital data words over a standard two-wire bus using a fixed I²C device address. This digital output makes it highly compatible with modern embedded system architectures where analog-to-digital conversion resources may be limited or where noise immunity and data integrity over longer trace runs are priorities. The device offers both high resolution and high accuracy within a tight total error band, making it suitable for applications where small differential pressure differences must be resolved reliably over time and temperature variation. The sensor is configured as a differential pressure measurement device, meaning it produces an output proportional to the difference in pressure between its two pneumatic ports rather than to absolute or gauge pressure relative to atmosphere. This makes it particularly well suited to airflow measurement, filter condition monitoring, liquid level detection, spirometry and respiratory measurement, HVAC duct pressure sensing, and other applications where the pressure difference across two points in a system is the relevant physical quantity. The device is housed in a through-hole dual in-line package with two radial barbed pneumatic port fittings located on the same side of the package body, allowing small-bore flexible tubing to be connected directly to each port without requiring additional adapter fittings. The barbed port design provides a secure, friction-held tube connection that resists accidental disconnection during normal handling and operation. The package is designed for standard through-hole PCB mounting, and the device is intended for use with non-corrosive, non-ionic dry gases only, consistent with the silicon and ceramic wetted materials used in its construction. Spec Sheet Identification Part Number: HSCDRRN001ND2A5 Series: TruStability HSC Series Manufacturer: Honeywell Sensing and Productivity Solutions Functional Classification Device Type: Board-mount piezoresistive silicon pressure sensor Sensing Type: Differential pressure Compensation: Fully calibrated and temperature compensated via integrated ASIC Accuracy Class: High accuracy, tight total error band class Output Interface Output Type: Digital I²C I²C Device Address: Fixed address 0x28 Output Resolution: High-resolution digital pressure word Applicable Interface Standards: I²C-compatible digital output Pressure Port Configuration Port Style: Dual radial barbed ports Port Orientation: Same side, both ports on the same face of the package Tubing Connection: Direct small-bore flexible tube connection via barbed fittings Media Compatibility: Non-corrosive, non-ionic dry gases only Pressure Characteristics Pressure Type: Differential Pressure Range: Very low differential pressure class, sub-inch water column range Overpressure Capability: Rated overpressure withstand above operating range Power Supply Supply Voltage: Standard logic-level supply rail class Environmental & Mechanical Operating Temperature Range: Commercial/industrial extended temperature range Compensated Temperature Range: Subset of the full operating temperature range, within which calibrated accuracy is maintained Mount Type: Through-hole Package: DIP (Dual In-line Package), standard pin pitch Application Suitability Target Applications: Airflow measurement, HVAC duct pressure sensing, filter monitoring, respiratory and spirometry equipment, liquid level detection, low-pressure process monitoring Environmental & Qualification RoHS Compliance: Yes Media Restriction: Dry, non-corrosive, non-ionic gases only; no liquid media on Port #HSCDRRN001ND2A5 #Honeywell #TruStability #HSCSeries #PressureSensor #DifferentialPressure #PiezoresistiveSensor #I2CSensor #BoardMountSensor #LowPressureSensor #AirflowSensor #HVACSensor #RespiratoryMedical #ThroughHole #DIPPackage #CompensatedSensor #TemperatureCompensated #SensorDatasheet #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant

Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount SHT40 / SHT41 Sensirion SHT4x Series (SHT40 / SHT41 / SHT43 / SHT45) – ultra-low-power digital humidity and temperature sensor with I²C interface. Provides high-accuracy relative humidity (RH) and temperature measurements in a compact 1.5 mm × 1.5 mm DFN package. Features factory calibration, CRC-protected communication, integrated heater, multiple I²C addresses, low current consumption, and optional PTFE membrane protection. Suitable for battery-powered, industrial, consumer, wearable, medical, HVAC, and IoT applications. Search Keywords: SHT4x, SHT40, SHT41, SHT43, SHT45, Sensirion Humidity Sensor, Temperature Sensor, Digital Humidity Sensor, Digital Temperature Sensor, RH Sensor, Relative Humidity Sensor, I2C Sensor, Environmental Sensor, Ultra Low Power Sensor, Precision Humidity Sensor, Precision Temperature Sensor, Industrial Sensor, IoT Sensor, HVAC Sensor, Battery Powered Sensor, DFN4 Sensor Hashtags: #SHT4x #SHT40 #SHT41 #SHT43 #SHT45 #Sensirion #HumiditySensor #TemperatureSensor #RHSensor #EnvironmentalSensor #I2C #I2CSensor #DigitalSensor #LowPowerSensor #IoT #HVAC #WearableElectronics #IndustrialElectronics #EmbeddedSystems #PCBDesign

Texas Instruments OPT4060 high-speed high-sensitivity RGBW color sensor, single-chip light-to-digital sensor with four optical channels for red, green, blue and wide/clear band measurement, I2C interface, semi-logarithmic output with wide dynamic range from 2.15mlux to 144klux, 12 configurable conversion times from 600µs to 800ms, automatic full-scale light range selection, selectable I2C address, interrupt output, low 24µA operating current and 2µA standby current, 1.6V to 3.6V supply range, 5.5V tolerant I/Os, SOT-5X3 2.1 x 1.9 x 0.6mm package. Search Keywords: OPT4060, Texas Instruments OPT4060, TI OPT4060, OPT4060 color sensor, RGBW color sensor, high speed color sensor, high sensitivity color sensor, I2C color sensor, light to digital sensor, RGB light sensor, ambient light color sensor, wide dynamic range light sensor, 144klux sensor, SOT-5X3 color sensor, OPT4060 Hashtags: #OPT4060 #TexasInstrumentsOPT4060 #TIColorSensor #RGBWSensor #ColorSensor #LightSensor #LightToDigitalSensor #I2CSensor #AmbientLightSensor #HighSensitivitySensor #HighSpeedSensor #144kluxSensor #SOT5X3

Attitude Sensors LSM6DSO32TR LGA-14_L3.0-W2.5-P0.50-TL LCSC Part Number: C1864162 JLCPCB Part Class: Extended Part Manufactured by ST(意法半导体)STMicroelectronics LSM6DSO32 iNEMO 6-axis inertial measurement unit, integrated always-on 3D digital accelerometer and 3D digital gyroscope, accelerometer full-scale ranges ±4/±8/±16/±32g, gyroscope full-scale ranges ±125/±250/±500/±1000/±2000dps, low power consumption, 1.71V to 3.6V supply voltage, SPI/I2C/MIPI I3C interface, smart FIFO up to 9kbytes, embedded pedometer, step detector, tilt detection and motion functions, embedded temperature sensor, -40°C to +85°C operating range, compact 14-lead LGA 2.5 x 3.0 x 0.83mm package. Search Keywords: LSM6DSO32, ST LSM6DSO32, STMicroelectronics LSM6DSO32, LSM6DSO32TR, iNEMO inertial module, 6-axis IMU, 3D accelerometer gyroscope, 32g accelerometer, 2000dps gyroscope, LSM6DSO32 IMU sensor, LSM6DSO32 accelerometer, LSM6DSO32 gyroscope, SPI I2C I3C IMU, LGA-14 IMU, 2.5x3mm IMU, LSM6DSO32 datasheet Hashtags: #LSM6DSO32 #LSM6DSO32TR #STMicroelectronics #STIMU #iNEMO #IMUSensor #6AxisIMU #Accelerometer #Gyroscope #3DAccelerometer #3DGyroscope #32gAccelerometer #2000dpsGyroscope #I2CSensor #SPISensor #I3CSensor #LGA14 #MotionSensor

Magnetic Sensors LIS2MDLTR LGA-12_L2.0-W2.0-P0.50-BL LCSC Part Number: C919695 JLCPCB Part Class: Extended Part Manufactured by ST(意法半导体) STMicroelectronics LIS2MDL ultralow-power high-performance 3-axis digital magnetometer, ±50 gauss magnetic dynamic range, 16-bit data output, SPI and I2C serial interfaces, 1.71V to 3.6V analog supply voltage, selectable power modes and resolution, single measurement mode, programmable interrupt generator, embedded self-test and temperature sensor, -40°C to +85°C operating range, LGA-12 package 2.0 x 2.0 x 0.7mm. Search Keywords: LIS2MDL, LIS2MDLTR, ST LIS2MDL, STMicroelectronics LIS2MDL, LIS2MDL magnetometer, 3-axis magnetometer, digital magnetic sensor, 3-axis digital magnetic sensor, ±50 gauss magnetometer, I2C SPI magnetometer, 16-bit magnetometer, low power magnetometer, compass sensor, LGA-12 magnetometer, 2x2mm magnetometer Hashtags: #LIS2MDL #LIS2MDLTR #STMicroelectronics #Magnetometer #3AxisMagnetometer #DigitalMagneticSensor #CompassSensor #I2CSensor #SPISensor #16BitSensor #LowPowerSensor #50GaussSensor #LGA12

Humidity Sensors/Temperature and Humidity Sensors SHT31-DIS-F2.5kS DFN-8_L2.5-W2.5-P0.50-BL-EP LCSC Part Number: C453460 JLCPCB Part Class: Extended Part Manufactured by Sensirion(瑞士盛思锐) Sensirion SHT3x-DIS digital humidity and temperature sensor, fully calibrated and temperature-compensated digital output, 2.15V to 5.5V supply voltage range, I2C interface up to 1MHz with two user-selectable addresses, typical accuracy up to ±1.5%RH and ±0.1°C for SHT35, NIST traceability, fast start-up and measurement time, integrated RH and temperature sensing, tiny 8-pin DFN package with 2.5 x 2.5mm footprint and 0.9mm height. Search Keywords: SHT3x-DIS, Sensirion SHT3x-DIS, SHT30-DIS, SHT31-DIS, SHT35-DIS, SHT3x humidity sensor, Sensirion humidity temperature sensor, digital humidity sensor, digital temperature sensor, I2C humidity sensor, I2C temperature sensor, SHT35 high accuracy sensor, SHT3x DFN-8, 2.5x2.5mm humidity sensor, CMOSens humidity sensor, SHT3x-DIS datasheet Hashtags: #SHT3xDIS #SHT30DIS #SHT31DIS #SHT35DIS #SensirionSHT3x #SensirionSensor #HumiditySensor #TemperatureSensor #HumidityTemperatureSensor #DigitalHumiditySensor #I2CSensor #CMOSensSensor #DFN8Sensor #25x25mmSensor #HighAccuracyHumiditySensor #NISTTraceableSensor

Sensor Modules BME280 Environmental Sensor LGA-8_BME280_BL LCSC Part Number: C431940 JLCPCB Part Class: Extended Part Manufactured by Waveshare(微雪电子) Bosch BME280 combined digital humidity, barometric pressure and temperature environmental sensor, compact metal-lid LGA package with 2.5 x 2.5mm footprint and 0.93mm height, low power consumption for battery-powered devices, high accuracy humidity and pressure measurement, integrated temperature sensor for compensation and ambient temperature estimation, SPI and I2C interfaces, 1.71V to 3.6V sensor supply range, 1.2V to 3.6V interface supply range, sleep/normal/forced operating modes, current consumption down to 0.1µA in disabled state, suitable for indoor navigation, home automation, health care, GPS refinement and weather monitoring applications. Search Keywords: BME280, Bosch BME280, Bosch Sensortec BME280, BME280 environmental sensor, BME280 humidity pressure temperature sensor, BME280 barometric pressure sensor, BME280 temperature humidity sensor, BME280 I2C SPI sensor, BME280 LGA, 2.5x2.5mm sensor, low power environmental sensor, digital humidity sensor, digital pressure sensor, BMP280 compatible sensor, BME280 datasheet Hashtags: #BME280 #BoschBME280 #BoschSensortec #EnvironmentalSensor #HumiditySensor #PressureSensor #TemperatureSensor #BarometricPressureSensor #DigitalSensor #I2CSensor #SPISensor #LowPowerSensor #LGA8 #25x25mmSensor #IndoorNavigationSensor #WeatherSensor

Optical Sensor Ambient I2C 6-UDFN Exposed Pad ## Engineering Specification ## General Description The **MAX44009EDT+T** is an Analog Devices / Maxim Integrated digital ambient light sensor designed for portable electronics, display brightness control, industrial sensors, embedded systems, and low-power optical sensing applications. It integrates an ambient light photodiode, signal conditioning, analog-to-digital conversion, and an I²C digital output interface in a compact surface-mount package. The device is suitable for systems requiring automatic brightness adjustment, low current consumption, and light measurement behavior that closely follows human-eye response. ## Device Identification Manufacturer Part Number: **MAX44009EDT+T** Manufacturer: **Analog Devices / Maxim Integrated** Product Series: **MAX44009** Device Category: **Sensor Integrated Circuit** Device Type: **Digital Ambient Light Sensor** Sensor Interface: **I²C Digital Output** Mounting Type: **Surface Mount** Package Type: **UTDFN-Opto / UDFN** ## Functional Description The device functions as a digital ambient light sensor that measures surrounding light intensity and reports the measurement through an I²C interface. It is designed to help electronic systems adjust display brightness, conserve power, improve user visibility, and respond to changes in lighting conditions. The integrated optical sensing and digital conversion circuitry reduce the need for external analog signal-conditioning components. ## Optical Sensing Description The sensor includes an on-chip photodiode with spectral response optimized to approximate human-eye sensitivity. It also incorporates infrared and ultraviolet blocking capability to improve ambient light measurement accuracy. The adaptive gain function automatically selects the appropriate measurement range, allowing the device to operate across very low-light and bright-light conditions. ## Electrical Description The **MAX44009EDT+T** operates from a low-voltage supply range and is optimized for ultra-low power consumption. It supports digital communication through an I²C interface and is suitable for battery-powered and energy-sensitive systems. Proper supply decoupling, pull-up resistor selection, and bus voltage compatibility should be considered during circuit design. ## Package and Mechanical Description The component is supplied in a compact surface-mount optical package suitable for space-constrained printed circuit board designs. The package is intended for placement where the optical sensing window has access to ambient light while maintaining proper mechanical protection from contamination, shadowing, and enclosure obstruction. ## Interface and Control Description The device communicates with a host microcontroller or processor through an I²C digital interface. The host can read ambient light data and configure device behavior through register-based communication. The selectable I²C addressing feature supports flexible integration in systems that may include multiple I²C peripherals. ## Mounting and Assembly Description The **MAX44009EDT+T** is intended for surface-mount PCB assembly using standard reflow soldering processes. PCB layout should follow the manufacturer’s recommended footprint and assembly guidance. The optical sensing area should remain unobstructed, clean, and aligned with the product enclosure opening or light pipe when used. ## Application Suitability The device is suitable for smartphones, tablets, notebooks, wearable electronics, handheld devices, display brightness control, industrial light sensing, smart home devices, battery-powered equipment, sensor modules, and embedded systems requiring digital ambient light detection. ## Design Considerations The design should account for sensor placement, optical window design, enclosure transparency, light pipe geometry, I²C bus pull-up values, supply voltage compatibility, ambient interference, temperature conditions, and contamination protection. The sensor should not be blocked by opaque materials or placed where shadows, reflections, or nearby LEDs may distort the measured ambient light level. ## Hashtags #commonpartslibrary #integratedcircuit #sensor #ambientlightsensor #digitalsensor #opticalsensor #analogdevices #maximintegrated #max44009 #max44009edt #i2csensor #lightmeasurement #brightnesscontrol #lowpowersensor #portableelectronics #displaycontrol #embeddedhardware #embeddeddesign #smdcomponent #surfacemount #utdfnpackage #uDFNpackage #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #componentlibrary #engineeringparts #electronicsengineering

InvenSense MPU-60X0 / MPU-6000 / MPU-6050 6-axis MotionTracking IMU, integrating 3-axis gyroscope, 3-axis accelerometer and Digital Motion Processor (DMP) in a compact 4 x 4 x 0.9mm QFN package. Features programmable gyroscope ranges ±250/±500/±1000/±2000 dps, programmable accelerometer ranges ±2g/±4g/±8g/±16g, 16-bit ADCs, 1024-byte FIFO, embedded temperature sensor, I2C interface up to 400kHz and SPI interface up to 1MHz/20MHz on MPU-6000, 2.375V to 3.46V supply range, designed for motion sensing, gesture control, image stabilization, navigation, wearables, smartphones, tablets and embedded motion-control applications. Search Keywords: MPU-60X0, MPU-6000, MPU-6050, InvenSense MPU-6050, InvenSense MPU-6000, 6-axis IMU, 3-axis gyroscope accelerometer, MotionTracking sensor, Digital Motion Processor, DMP IMU, I2C IMU sensor, SPI IMU sensor, MPU6050 accelerometer gyroscope, MPU6000 gyro, QFN 4x4mm IMU, motion sensor module Hashtags: #MPU60X0 #MPU6000 #MPU6050 #InvenSenseMPU6050 #IMUSensor #6AxisIMU #Accelerometer #Gyroscope #MotionTracking #DigitalMotionProcessor #DMP #I2CSensor #SPISensor #MotionSensor #QFN24

Ambient Light Sensors TCS34725FN SENSOR-SMD_TCS34725FN LCSC Part Number: C2649487 JLCPCB Part Class: Extended Part Manufactured by ams(艾迈斯半导体) TCS3472 color sensor, TCS34725 color sensor, TCS3472 RGB sensor, TCS34725 RGB light sensor, TCS3472 RGBC sensor, TCS34725 RGBC sensor, TCS3472 ambient light sensor, TCS34725 ambient light sensor, RGB clear light sensor, color light-to-digital converter, I2C color sensor, color sensor with IR blocking filter, AMS TCS3472, AMS TCS34725, ams OSRAM TCS34725, TCS34725FN, TCS3472FN #TCS3472 #TCS34725 #TCS34725FN #AMS #AMSOSRAM #ColorSensor #RGBSensor #RGBCSensor #AmbientLightSensor #LightToDigitalConverter #I2CSensor #IRBlockingFilter #OpticalSensor #ColorDetectionSensor