Electronic Fuse Regulator 5.3A 20-WQFN (3x4) The TPS25940LRVCR is a compact eFuse (electronic fuse) power management IC from Texas Instruments designed to provide advanced power-path protection and load management for systems such as SSDs, servers, storage devices, and embedded electronics. It integrates protection features like overcurrent limiting, reverse current blocking, overvoltage protection, and controlled startup sequencing into a single chip. Wide input voltage range: 2.7 V to 18 V Adjustable current limit: 0.6 A to 5.3 A Low ON resistance: 42 mΩ typical True reverse current blocking using back-to-back MOSFETs Programmable output slew rate (dV/dt control) for inrush current management Overvoltage and undervoltage protection Fault and Power-Good outputs for system monitoring Current monitor (IMON) output Low-power DevSleep support for SSD applications Fast reverse voltage shutdown (~1 µs) Operating temperature: −40°C to +125°C junction temperature Available in a compact 20-pin WQFN package Typical Applications PCIe / SATA / SAS SSDs and HDDs Enterprise servers and storage systems RAID controller cards Smart load switches Set-top boxes and gaming systems Backup power and holdup capacitor systems Component Category This component belongs to: Power Management IC (PMIC) More specifically: eFuse / Hot-swap / Load Switch IC Package Information Package type: 20-WQFN (3 mm × 4 mm) Mounting type: Surface Mount (SMD) #commonpartslibrary #integratedcircuit #powermanagement #currentregulation

2.7 - 5.7 V, 4 A, 31-m True Reverse Current Blocking eFuse with Input Reverse Polarity Protection #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Current-regulation #TPS25210

Hot Swap Controller 1 Channel General Purpose 23-LQFN-CLIP (6x5) The TPS16850VMAR is an automotive-grade integrated hot-swap and protection controller designed for robust power-path management in low-voltage DC systems. The device provides comprehensive protection features including overvoltage protection, undervoltage protection, reverse current blocking, inrush current control, overcurrent protection, and short-circuit protection. It is intended for applications requiring controlled power delivery and fault isolation in harsh electrical environments. The device integrates dual back-to-back MOSFET control to support bidirectional current blocking and safe power switching. Adjustable protection thresholds and timing parameters allow flexible system configuration for various power rail requirements. The TPS16850VMAR supports operation across a wide supply voltage range and is optimized for automotive and industrial systems requiring high reliability and transient immunity. The controller includes fault reporting and system status monitoring functions to support intelligent power management architectures. Soft-start capability minimizes inrush current during startup, reducing stress on connectors, power supplies, and downstream circuitry. Integrated thermal protection enhances system safety during abnormal operating conditions. The TPS16850VMAR is qualified for automotive applications and complies with AEC-Q100 requirements. The device is provided in a compact VQFN package suitable for space-constrained designs and high-density PCB layouts. Key Features Automotive-qualified hot-swap and eFuse controller Wide operating input voltage range Adjustable overvoltage and undervoltage protection Reverse current and reverse polarity protection Inrush current control with programmable soft-start Adjustable overcurrent and short-circuit protection Fault monitoring and reporting outputs Integrated thermal shutdown protection Back-to-back MOSFET control architecture Fast fault response and isolation Support for controlled power sequencing Designed for harsh automotive electrical environments AEC-Q100 qualified for automotive applications Compact VQFN surface-mount package Applications Automotive electronic control units Infotainment and telematics systems ADAS and camera modules Industrial power distribution Hot-swappable system power rails Battery-powered embedded systems Power-path management systems Protection for sensitive downstream electronics Electrical Characteristics Operates from low-voltage DC power rails Supports programmable protection thresholds Integrated current sensing and fault detection High transient immunity for automotive environments Low standby current operation Fast response to overload and fault conditions Mechanical Characteristics Surface-mount VQFN package Compact footprint for dense PCB layouts RoHS-compliant package construction Suitable for automated assembly processes Environmental and Reliability Specifications Automotive AEC-Q100 qualified Extended operating temperature range ESD protection on interface pins Designed for high-reliability applications Supports operation in electrically noisy environments #commonpartslibrary #integratedcircuit #powermanagement #hotswapcontrollers

60V, 6A Power Limiting, Surge Protection Industrial eFuse, Adjustable Overvoltage cut-off, Active Current Limiting, VQFN-24 efuse protection switch Texas*RGE0024H*

Automotive Smart High-Side Power Switch – Single-channel 100 V smart high-side N-channel power switch for automotive power distribution, electronic fuse (eFuse), load protection, and battery-connected applications. Operates from a 3.5 V to 80 V supply, drives up to 4 A continuous output current, and features an ultra-low 10 mΩ typical RDS(on) for high-efficiency load switching. Includes adjustable current limiting, reverse current blocking, reverse battery protection, overvoltage protection, undervoltage lockout (UVLO), short-circuit protection, thermal shutdown, slew-rate control, open-load diagnostics, status flag output, and differential input control. Qualified to AEC-Q100 Grade 1, specified for operation over a −40°C to +125°C ambient temperature range, and housed in a 19-pin VSSOP (DGX) package. #TexasInstruments #TPS48110AQDGXRQ1 #TPS48110Q1 #SmartHighSideSwitch #HighSidePowerSwitch #EFuse #LoadSwitch #PowerDistribution #Automotive #CurrentLimiting #ReverseBatteryProtection #AECQ100 #EmbeddedSystems

Electronic Fuse Regulator 4A 8-WSON (2x2) eFuse providing input power-path protection with adjustable current limiting and fast overvoltage protection for 3 V to 18 V input supplies, supporting 0.5 A to 4 A load current. The TPS259535DSGR features 34 mΩ typical on-resistance, a 5.7 V typical output overvoltage clamp, auto-retry after thermal shutdown, active-high enable with adjustable UVLO, and quick output discharge, all in an 8-pin WSON package. #TexasInstruments #TPS259535DSGR #eFuse #PowerManagement #HotSwap #OvervoltageProtection #CurrentLimiting #UVLO #QuickOutputDischarge #WSON8

Integrated Automotive eFuse with Hot-Swap Controller – Automotive-grade integrated electronic fuse (eFuse) and hot-swap controller for power distribution, automotive ECUs, ADAS, industrial automation, servers, SSDs, and embedded power management. Operates from a 2.7 V to 26 V input supply (30 V absolute maximum) and integrates a 2.7 mΩ MOSFET capable of supporting up to 20 A load current with an adjustable current limit from 2 A to 20 A. Features 1.5% accurate load current monitoring, programmable inrush current control, adjustable overvoltage protection (OVP), undervoltage protection (UVP), reverse current blocking with external blocking FET drive, thermal shutdown, short-circuit protection, fault timer, auto-retry or latch-off fault response, and power-good/fault reporting for robust system protection. Specified for operation over a −40°C to +125°C temperature range and housed in a compact 24-pin VQFN (4 × 4 mm) package. #TexasInstruments #TPS259830ONRGER #TPS25983 #eFuse #HotSwapController #PowerManagement #CurrentMonitoring #InrushControl #CircuitProtection #AutomotiveElectronics #VQFN24 #EmbeddedSystems

Electronic Fuse Regulator 4A 8-WSON (2x2) The TPS259530DSGR is a compact, integrated eFuse protection device designed to provide robust power-path management for low-voltage DC systems, particularly nominal five-volt rails. It combines multiple protection and control features into a single solution, enabling safe distribution of power to downstream circuitry while minimizing the need for external components. The device supports controlled inrush current during startup, continuous current monitoring, and rapid fault response to protect both the power source and the load. Integrated protection mechanisms include overvoltage protection, undervoltage lockout, overcurrent limiting, thermal shutdown, and reverse current blocking. This makes the device well suited for applications requiring high reliability, such as embedded systems, industrial electronics, consumer devices, and communication equipment. Functional Description The device operates as a high-side protection switch using an internal MOSFET to control current flow from the input supply to the load. It monitors input voltage, output current, and internal temperature to ensure operation within safe limits. When a fault condition such as overcurrent or overvoltage is detected, the device limits or interrupts current flow to prevent damage. The integrated control loop provides smooth startup by limiting inrush current and preventing supply droop. Reverse current blocking prevents unwanted current flow from the output back to the input when the input supply is removed or drops below the output level. Electrical Characteristics The device supports operation across a wide input voltage range suitable for low-voltage DC systems, including typical five-volt rails. It features an adjustable overvoltage protection threshold aligned with five-volt system requirements, along with configurable undervoltage lockout to ensure proper system startup and shutdown behavior. The current limit is externally programmable, allowing flexibility for different load conditions. The device exhibits low on-resistance to minimize power dissipation and voltage drop during normal operation. Protection Features The TPS259530DSGR integrates multiple protection functions to enhance system robustness. Overvoltage protection prevents excessive input voltage from reaching the load. Undervoltage lockout ensures the device only operates when the input supply is within a valid range. Overcurrent protection actively limits current during fault conditions and can respond rapidly to short circuits. Thermal shutdown protects the device from overheating by disabling operation when internal temperature exceeds safe limits. Reverse current blocking prevents backflow of current, safeguarding both the source and load. Control and Interface The device includes an enable control input that allows external control of the power path. It supports configurable behavior for fault response and recovery, depending on system design. External components can be used to set thresholds such as current limit and undervoltage lockout, providing design flexibility. Status signaling allows system-level monitoring of fault conditions. Mechanical and Package Information The TPS259530DSGR is provided in a compact surface-mount package suitable for space-constrained applications. The package is optimized for thermal performance and efficient PCB layout, enabling reliable operation under varying load conditions. It is supplied in tape-and-reel format for automated assembly processes. Applications This device is intended for use in systems requiring reliable power distribution and protection. Typical applications include five-volt power rails in embedded systems, industrial control modules, consumer electronics, communication devices, and peripheral power management circuits. Summary The TPS259530DSGR offers an integrated, high-reliability solution for power path protection and management in low-voltage systems. Its combination of protection features, configurability, and compact form factor makes it a widely used choice for safeguarding five-volt supply rails in modern electronic designs. #commonpartslibrary #integratedcircuit #powermanagement

TPS259621DDAR ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP LCSC Part Number: C2155774 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments TPS2596 eFuse integrated FET hot-swap protection IC, 2.7V to 19V input voltage range, 21V absolute maximum input rating, 0.125A to 2A adjustable current limit, 89mΩ typical on-resistance, accurate current monitor output, active-high enable with adjustable UVLO, fast overvoltage clamp or adjustable OVLO options, adjustable output slew-rate control, overtemperature protection, fault indication pin, IEC 61000-4-4 EFT immunity, -40°C to +125°C junction temperature range, SOIC-8 package. Search Keywords: TPS2596, Texas Instruments TPS2596, TI TPS2596, TPS2596 eFuse, TPS2596 hot swap controller, TPS2596 power protection IC, TPS2596 current limit switch, TPS259620DDA, TPS259621DDA, TPS259630DDA, TPS259631DDA, 2A eFuse, 19V eFuse, 89mOhm eFuse, adjustable current limit eFuse, overvoltage protection eFuse, current monitor eFuse, SOIC-8 eFuse, TPS2596 datasheet Hashtags: #TPS2596 #TexasInstrumentsTPS2596 #TIEFuse #eFuse #HotSwapProtection #PowerProtectionIC #CurrentLimitSwitch #IntegratedFETSwitch #2AeFuse #19VeFuse #89mOhmSwitch #OvervoltageProtection #UVLOProtection #CurrentMonitorIC #FaultIndicator #SOIC8 #TPS259620DDA #TPS259621DDA #TPS259630DDA #TPS259631DDA

IC SURGE STOPPER 2.7V~18V WSON-8-EP(2x2) TPS259530DSGT is a highly integrated eFuse (electronic fuse) from Texas Instruments designed to provide advanced circuit protection and power management for systems operating from 2.7 V to 18 V. It integrates a low-resistance MOSFET, adjustable current limiting, fast overvoltage protection, inrush current control, and thermal shutdown features, making it ideal for hot-swap, industrial, consumer electronics, storage, and adapter-powered applications. Key Features Wide input voltage range: 2.7 V to 18 V 34 mΩ typical integrated MOSFET on-resistance Adjustable current limit from 0.5 A to 4 A Fast overvoltage protection with 5 µs typical response time Adjustable undervoltage lockout (UVLO) Adjustable output slew rate (dV/dt) for inrush current control Load current monitor (ILM) output Fault indication (FLT) output Overtemperature protection (OTP) Hot-swap and hot-plug capable IEC 62368-1 certified and UL recognized Compact 8-pin WSON/DSG package Hashtags #TPS259530DSGT #TexasInstruments #eFuse #HotSwapController #CircuitProtection #PowerManagement #OvervoltageProtection #CurrentLimiting #InrushCurrentControl #IndustrialElectronics #EmbeddedSystems #HardwareDesign #ElectronicsEngineering #PowerSupplyProtection #PCBDesign