!!!Warning!!! Clone the project instead of making changes to the original design. !!!Warning!!! This is a micro drone made using Arduino Nano and NRF24L01 Battery1 : 3.7V Battery2 : 3.7V Motor : 8520 micro coreless motor Connect NRF24L01 (with adapter module) using jumper wires

MAX-M10 RF Receiver BeiDou, Galileo, GLONASS, GPS, GNSS 1.561GHz, 1.575GHz, 1.602GHz -167dBm 921.6kbps Not Included Module The MAX-M10S-00B is a professional-grade, ultra-low-power GNSS positioning module from u-blox based on the u-blox M10 platform. It is designed for battery-powered applications such as asset trackers, wearables, IoT devices, and navigation systems. The module supports simultaneous reception of multiple GNSS constellations, providing high positioning availability, fast acquisition times, and excellent sensitivity even in challenging urban or weak-signal environments. It integrates a TCXO, LNA, and SAW filter to improve RF performance while maintaining very low power consumption. Key Features Multi-constellation GNSS receiver: GPS Galileo GLONASS BeiDou QZSS SBAS support (WAAS, EGNOS, MSAS, GAGAN) Concurrent tracking of up to four GNSS constellations for improved position availability and accuracy. Ultra-low power consumption: Approximately 25 mW in continuous tracking mode, making it ideal for battery-powered devices. High RF sensitivity: Tracking sensitivity up to −167 dBm for reliable operation in weak-signal conditions. High positioning accuracy: Typical position accuracy of approximately 1.5 m CEP under suitable conditions. Navigation update rate: Up to 10 Hz for responsive tracking applications. Integrated RF front-end: Built-in LNA (Low Noise Amplifier) Built-in SAW filter Integrated TCXO for stable operation. Supports Assisted GNSS services: AssistNow Online AssistNow Offline AssistNow Autonomous CloudLocate support for low-power IoT positioning. Communication interfaces: UART I²C NMEA and UBX protocols supported. Wide operating temperature range: −40°C to +85°C. Supply voltage: 1.76 V to 3.6 V. Typical Applications Asset tracking devices Wearable electronics Fleet management systems Industrial IoT Smart meters Drone and robotics navigation Personal navigation devices Timing and synchronization systems Package Information Package Type: Surface-mount LCC module Dimensions: 9.7 mm × 10.1 mm × 2.5 mm (typical module size) #Commonpartslibrary #RF #Wireless #RFreceivers #MAXM10S #uBlox #GNSS #GPS #Galileo #GLONASS #BeiDou #QZSS #NavigationModule #GNSSModule #GPSTracking #AssetTracking #IoT #IndustrialIoT #WearableTech #FleetManagement #DroneNavigation #EmbeddedSystems #ElectronicsDesign #PCBDesign #HardwareEngineering #LowPowerDesign #LocationTracking #Geolocation #RFDesign #LNA #SMTModule

STM32F4-based flight controller featuring a 6-axis IMU (accelerometer + gyroscope) for stable flight dynamics and a MAX7456EUI OSD generator for real-time video overlay of flight telemetry. #drone #flightController #STM32F405 #controller #OSD #video #referenceDesign #project #MPU6000 #template

ADXL345 iMEMS® Accelerometer, 3 Axis Sensor Evaluation Board The ADXL345 measures acceleration in three axes (X, Y, Z) and outputs digital data via either I²C or SPI interfaces. It is widely used in applications like tilt sensing, vibration monitoring, free-fall detection, and motion-based user interfaces. Its high resolution (up to 13-bit) allows it to detect very small changes in motion, making it suitable for both consumer electronics and industrial applications. Key Features 3-axis acceleration measurement (X, Y, Z) Selectable measurement ranges: ±2g, ±4g, ±8g, ±16g High resolution (13-bit) with up to 4 mg/LSB sensitivity Digital output interfaces: I²C and SPI Low power consumption: ideal for battery-powered devices Built-in motion detection functions: Tap and double-tap detection Free-fall detection Activity and inactivity monitoring Wide bandwidth range: supports various data rates for different applications Operating voltage: typically 2.0V to 3.6V Compact package: small LGA form factor suitable for space-constrained designs Common Applications Smartphones and tablets (screen rotation, motion sensing) Wearable devices and fitness trackers Gaming controllers Robotics and drones Vibration and shock monitoring systems #commonpartslibrary #developmentboard #evaluationboard #sensor

Pressure Sensor 4.35PSI ~ 18.13PSI (30kPa ~ 125kPa) Absolute 10-WFLGA The BMP581 is a high-precision digital barometric pressure sensor designed for altitude tracking, environmental monitoring, navigation, weather sensing, and industrial measurement applications. It integrates a MEMS pressure sensing element with a low-noise analog front end and digital signal processing to deliver highly accurate pressure and temperature measurements over a wide operating range. The device supports low-power operation, making it suitable for portable, battery-powered, and always-on sensing systems. The sensor communicates through standard digital interfaces and includes configurable sampling, filtering, and interrupt features for flexible system integration. Its compact package enables use in space-constrained embedded designs such as wearables, mobile devices, drones, smart home systems, IoT devices, and industrial instrumentation. Engineering Specification Device Type Digital barometric pressure and temperature sensor Manufacturer Bosch Sensortec Pressure Measurement High-resolution absolute pressure measurement with integrated temperature compensation Temperature Measurement Integrated digital temperature sensing for environmental monitoring and pressure compensation Pressure Range Wide atmospheric pressure sensing range suitable for altitude and environmental applications Interface Support I²C and SPI digital communication interfaces Supply Voltage Low-voltage operation optimized for embedded and portable systems Power Consumption Ultra-low power modes with configurable performance and sampling settings Measurement Features Oversampling support with programmable output data rate and internal filtering Accuracy High absolute and relative pressure accuracy for precise altitude estimation and environmental sensing Noise Performance Low-noise sensor architecture for stable pressure readings and improved altitude resolution Interrupt Features Configurable interrupt generation for data-ready and threshold-based events FIFO Support Integrated FIFO buffering for efficient sensor data management Operating Temperature Industrial temperature operating capability for consumer and industrial environments Package Type Compact surface-mount package optimized for small PCB footprint designs Applications Altitude tracking, indoor navigation, weather stations, drones, wearable electronics, IoT sensing, HVAC systems, industrial monitoring, and portable devices #CommonPartsLibrary #Sensor #Transducer #PressureSensor

Pressure Sensor 4.35PSI ~ 18.13PSI (30kPa ~ 125kPa) 9-LGA The BMP585 is a high-precision digital barometric pressure sensor designed for accurate altitude and environmental pressure measurement in compact, low-power embedded systems. It integrates a MEMS sensing element with advanced signal conditioning and digital compensation circuitry to provide highly stable and reliable pressure and temperature data across a wide operating range. The device is optimized for portable electronics, industrial sensing, indoor navigation, weather monitoring, drones, and IoT applications requiring precise atmospheric measurements. The sensor supports digital communication through standard serial interfaces, enabling straightforward integration with modern microcontrollers and processors. Its low noise performance, high resolution, and fast response characteristics make it suitable for applications involving motion tracking, vertical positioning, and environmental monitoring. The compact surface-mount package allows efficient PCB layout integration in space-constrained designs. The BMP585 incorporates configurable sampling, filtering, and power management features to balance measurement accuracy, bandwidth, and energy consumption. Internal calibration and compensation algorithms reduce system-level complexity while improving long-term stability and measurement consistency. The device is designed for robust operation under varying environmental conditions and supports low-power modes for battery-operated systems. Engineering Specification Device Type Digital barometric pressure and temperature sensor Sensor Functions Atmospheric pressure sensing Temperature sensing Altitude estimation support Pressure Measurement High-resolution MEMS pressure sensing element Integrated digital compensation and calibration Low-noise pressure measurement architecture Temperature Measurement Integrated temperature sensing for environmental monitoring and pressure compensation Communication Interface I²C interface support SPI interface support Power Features Low-power operation Configurable performance and sampling modes Sleep and standby operating capability Signal Processing Integrated digital filtering Configurable oversampling Internal compensation engine Package Information Compact surface-mount package RoHS-compliant construction Operating Characteristics High measurement stability Fast response time Designed for portable and industrial environments Application Areas Wearable devices Indoor navigation systems Portable weather stations Industrial monitoring IoT sensing nodes Drones and altitude tracking systems Consumer electronics #commonpartslibrary #integratedcircuit #pressuresensor

PCB-Mount DC Power Connector – 3-position female PCB power connector for high-current DC power distribution in RC, drones, robotics, battery-powered, and embedded systems. Features through-hole (THT) PCB mounting, 90° right-angle orientation, gold-plated brass contacts, 15 A continuous current rating, 500 V DC rated voltage, and ≤0.8 mΩ contact resistance. Constructed with a UL94 V-0 flame-retardant PA housing, supports approximately 1,000 mating cycles, and operates over a −20°C to +120°C temperature range. Designed for direct PCB mounting with secure, low-resistance power connections. #AMASS #MR30PWFB #MR30 #PowerConnector #DCConnector #PCBConnector #HighCurrentConnector #ThroughHole #RightAngle #GoldPlatedContacts #BatteryConnector #Robotics #EmbeddedSystems

Plug Power Connectors The XT60U-M is a high-current 2-pin male DC power connector from the XT60 series, commonly manufactured by AMASS. It is widely used in RC batteries, drones, e-bikes, battery packs, power distribution systems, and other applications that require reliable high-current connections. The connector uses gold-plated brass contacts and a flame-retardant polyamide housing to provide low contact resistance, durability, and safe operation under high loads. Key Features Connector Type: XT60 series male plug Number of Pins: 2 Rated Current: 30 A continuous Rated Voltage: 500 V DC Contact Material: Gold-plated brass Housing Material: Polyamide (PA), UL94 V-0 flame-retardant Wire Size Support: Up to 12 AWG Mounting Method: Cable mount, solder termination Mechanical Life: Approximately 1000 mating cycles Operating Temperature Range: −20 °C to +120 °C Low Contact Resistance for efficient power transfer Polarized Design prevents reverse connection and incorrect mating Compact and Lightweight construction for battery-powered systems Typical Applications RC LiPo battery packs Drones and UAVs Electric bicycles and scooters Robotics projects Portable power systems Battery chargers and power distribution modules #CommonPartsLibrary #Connector