LVDS Digital Isolator 5700Vrms 4 Channel 2.5Gbps 40kV/µs CMTI 32-WFQFN Exposed Pad, CSP The ADN4624 is a quad-channel, signal isolated, low voltage differential signaling (LVDS) buffer that operates at up to 2.5 Gbps with very low jitter. The device integrates Analog Devices, Inc., iCoupler® technology, enhanced for high speed operation to provide drop-in galvanic isolation of LVDS signal chains. AC coupling and/or level shifting to the LVDS receivers and from the LVDS drivers allows isolation of other high speed signals such as current mode logic (CML). The ADN4624 includes a refresh mechanism to monitor the input and output states and ensure they remain the same in the absence of data transitions (for example, at power-on). For lower power consumption and high speed operation with low jitter, the LVDS and isolator circuits rely on 1.8 V supplies. The ADN4624 is fully specified over a wide industrial temperature range and is available in a 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance (for 5.7 kV rms or 8 kVPEAK surge and impulse voltages and reinforced insulation at ac mains voltages) or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance (for basic/functional isolation). FEATURES ► 5.7 kV rms and 1.5 kV rms LVDS isolators ► Complies with TIA/EIA-644-A LVDS signal levels ► Quad-channel configuration ► Any data rate up to 2.5 Gbps switching with low jitter ► 10 Gbps total bandwidth across four channels ► 2.15 ns typical propagation delay ► Typical jitter: 0.82 ps rms random, 40 ps total peak ► Lower power 1.8 V supplies ► ±8 kV IEC 61000-4-2 ESD protection across isolation barrier ► High common-mode transient immunity: 100 kV/μs typical ► Safety and regulatory approvals (28-lead SOIC_W_FP package) ► UL (pending): 5700 V rms for 1 minute per UL 1577 ► CSA Component Acceptance Notice 5A (pending) ► VDE certificate of conformity (pending) ► DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 ► VIORM = 849 VPEAK (working voltage) ► Enable or disable refresh (low speed output correctness check) ► Operating temperature range: −40°C to +125°C ► 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance APPLICATIONS ► Isolated video and imaging data ► Analog front-end isolation ► Data plane isolation ► Isolated high speed clock and data links ► Multi-gigabit serialization/deserialization (SERDES) ► Board-to-board optical replacement (for example, short reach fiber) #CommonPartsLibrary #Isolator #ADN4624BCPZ #AnalogDevices #LVDS #DigitalIsolator #GalvanicIsolation #HighSpeedCommunication #SERDES

Ultra-Low Quiescent Current LDO Voltage Regulator – Fixed 3.3 V low-dropout (LDO) linear voltage regulator delivering up to 150 mA output current for battery-powered devices, portable electronics, sensors, wireless modules, and embedded systems. Operates from a 2.3 V to 5.5 V input voltage and features an ultra-low 21 µA typical quiescent current, 135 mV maximum dropout voltage at 150 mA, and 60 dB PSRR at 10 kHz for efficient, low-noise power regulation. Includes an enable (EN) input, low shutdown current (<1 µA typical), overcurrent protection, thermal shutdown, and undervoltage lockout (UVLO). Optimized for use with 1 µF ceramic capacitors, operates over a −40°C to +125°C temperature range, and is housed in a 5-pin TSOT-23 package. #AnalogDevices #ADP121AUJZ33R7 #ADP121 #LDO #LinearRegulator #VoltageRegulator #LowDropout #PowerManagement #150mA #LowPower #TSOT23 #EmbeddedSystems

Buck-Boost Switching Regulator IC Positive Adjustable (Fixed) 6.5V (11.5V) 1 Output 6A 22-PowerWFQFN The MAX25239/MAX25240 are small, synchronous, buck-boost converters with integrated H-bridge switches. These ICs provide a fixed-output regulation voltage and an externally adjustable output voltage in the 3V to 20V range with an input voltage above, below, or equal to the output regulation voltage. The ICs have typical 8.2A and 10A input current limit options and can support continuous load currents up to 6A depending on the input-to-output voltage ratio and operating frequency. It also has a wide input voltage range of 2V to 36V. The MAX25239/MAX25240 have three switching frequency options: 2.1MHz, 400kHz, and 200kHz. The 2.1MHz high switching frequency allows small external components and reduced output ripple, and guarantees no AM band interference, while the 400kHz or 200kHz switching frequency offers better efficiency and relieves the power consumption concern. The SYNC input allows three operation modes: skip mode with ultra-low quiescent current, forced fixed-frequency PWM operation, and synchronization to an external clock. The IC also includes spread-spectrum frequency modulation to minimize EMI interference. The MAX25239/MAX25240 feature a power-OK (POK) indicator, undervoltage lockout, overvoltage protection, cycle-by-cycle current limit, and thermal shutdown. The ICs are available in small, 4.25mm x 4.25mm x 0.75mm, 22-pin FC2QFN and 5.00mm x 5.00mm x 0.75mm, 18- pin FCQFN packages. Key Features Wide 2 V to 36 V input voltage range Synchronous buck-boost topology for seamless step-up and step-down conversion Delivers up to 6 A continuous output current Adjustable output voltage from 3 V to 20 V (device variant includes fixed output configuration options) High conversion efficiency with integrated low-RDS(ON) MOSFETs 400 kHz switching frequency with spread-spectrum option for reduced EMI Very low 95 µA quiescent current in standby and 10 µA shutdown current Integrated protection features including overvoltage, short-circuit, thermal shutdown, and undervoltage lockout (UVLO) Power-Good (PGOOD) output for power monitoring AEC-Q100 qualified for automotive applications Operating junction temperature range: −40°C to +150°C Compact 22-pin FC2QFN (4.25 × 4.25 mm) package #MAX25240AFFFVY #AnalogDevices #BuckBoostConverter #DCDCConverter #PowerManagement #AutomotiveElectronics #AECQ100 #SwitchingRegulator #EmbeddedSystems #AutomotivePower

Optical Sensor I2C Output Optical heart rate and SpO₂ sensor module that integrates a PIN photodiode, three programmable LED drivers, a low-noise analog front end with a 19-bit ADC, ambient light cancellation, and a 128-word FIFO for optical data acquisition. It operates from a 3.0 V to 5.5 V LED supply, supports an I²C-compatible interface, and is designed for reflective heart rate and pulse oximetry measurements in low-power wearable applications. #OpticalSensor #HeartRateSensor #SpO2Sensor #OpticalModule #BiometricSensor #I2C #AnalogDevices

Buck Regulator Positive Output Step-Down DC-DC Controller IC 12-TDFN (3x3) Automotive Synchronous Buck Converter: MAX25231ATCB/V+ is a high-efficiency synchronous step-down converter designed for automotive applications, operating from a 4.5V to 36V input supply and providing up to 2A output current. It integrates a 2.1MHz switching frequency, forced-PWM mode, and is housed in a 12-pin 3mm × 3mm TDFN package. #Automotive #SynchronousBuckConverter #StepDownConverter #PowerManagement #AnalogDevices #MaximIntegrated #PCBComponent

This LT3473-based reference design is a step-up voltage regulator, converting a lower input voltage to a stable 16V output. Ideal for applications requiring a regulated 16V supply. #referenceDesign #Module #stepUp #voltageRegulator #16V #LT3473 #LT3473EDD#PBF #reusable #module #powermanagement #analogdevices #sublayout

This LTC3642-based design is a step-down voltage regulator, converting a higher input voltage to a stable 5V output. Ideal for applications requiring a regulated 5V supply. #referenceDesign #Module #Sublayout #stepDown #voltageRegulator #5V #LTC3642 #LTC3642IMS8E #reusable #module #powermanagement #analogdevices #sublayout

This LTC3401-based reference design is a boost converter, transforming a lower input voltage into a stable 3V3 output. Perfect for applications that need a regulated 3V3 power source. #referenceDesign #Module #boostConverter #voltageRegulator #3V3 #LTC3401 #LTC3401EMS#TRPBF #reusable #module #powermanagement #analogdevices #sublayout

This project is a dual-output step-down voltage regulator based on the LTC3547 IC, designed to efficiently convert a higher input voltage to stable 2.5V and 1.8V output voltages. It is suitable for applications requiring regulated power supplies with multiple voltage levels. #LTC3547 #Module #stepDown #voltageRegulator #2.5V #1.8V #reusable #module #powermanagement #analogdevices #sublayout

This LT3494-based reference design is a step-up voltage regulator, converting a lower input voltage to a stable 16V output. Ideal for applications requiring a regulated 16V supply. #referenceDesign #Module #stepUp #voltageRegulator #16V #LT3494 #LT3494AEDDB#TRPBF #reusable #module #powermanagement #analogdevices #sublayout

This is a boost module based on ADP1613 step-up dc-to-dc switching converter with a 15V output #dcdc #power #boost #15V #reusable #module #powermanagement #analogdevices #sublayout

This is a module of buck converter based on LT3991 with output voltage 3.3V #dcdc #power #ad #3V3 #reusable #module #powermanagement #analogdevices #sublayout