Phase Lock Loop (PLL) IC 2.4MHz 1 16-DIP (0.300", 7.62mm) CD4046BE is a CMOS Micropower Phase-Locked Loop (PLL) integrated circuit that combines a linear Voltage-Controlled Oscillator (VCO), two phase comparators, a source follower, and a Zener diode in a single package. It is designed for frequency synthesis, frequency detection, FM demodulation, clock recovery, motor speed control, and other synchronization applications. The device operates over a wide supply voltage range and offers low power consumption, high noise immunity, and excellent VCO linearity. Key Features Wide operating supply voltage range: 3 V to 18 V Integrated Voltage-Controlled Oscillator (VCO) Two selectable phase comparators for flexible PLL design Operating frequency range up to approximately 1.4 MHz Very low power consumption High VCO linearity (typically <1%) Low frequency drift with temperature VCO inhibit control for ON/OFF keying applications Built-in source follower output for demodulation applications High noise immunity characteristic of CMOS technology Available in 16-pin PDIP (CD4046BE) package Typical Applications Frequency synthesis and multiplication FM modulation and demodulation Frequency discrimination Clock recovery and data synchronization Tone decoding Voltage-to-frequency conversion FSK modulation/demodulation Motor speed control systems Signal tracking and phase synchronization circuits Hashtags #CD4046BE #PLL #PhaseLockedLoop #VCO #ClockRecovery #FrequencySynthesizer #FMDemodulator #FSKModulation #CMOS #TexasInstruments #AnalogIC #TimingIC #SignalProcessing #EmbeddedSystems #ElectronicsDesign

RF IC VCO Cellular, GPS, ISM 150MHz ~ 300MHz Differential Output SOT-6 #commonpartslibrary #integratedcircuit #rf #cellular

The RFFC5072 is a highly integrated wideband RF frequency conversion IC that combines a fractional-N PLL synthesizer, low phase-noise VCO, and a high-linearity RF mixer in a single device. It is designed for wireless infrastructure, software-defined radio (SDR), test equipment, military communications, and broadband frequency conversion applications. The device can generate local oscillator (LO) frequencies from 85 MHz to 4.2 GHz and perform frequency conversion for RF signals up to 6 GHz while maintaining excellent phase noise and spurious performance. Features  85MHz to 4200MHz LO Frequency Range  Fractional-N Synthesizer with Very Low Spurious Levels  Typical Step Size 1.5Hz  Fully Integrated Low Phase Noise VCO and LO Buffers  Integrated Phase Noise • 0.18° rms at 1GHz • 0.50° rms at 3GHz  High Linearity RF Mixer(s)  30MHz to 6000MHz Mixer Frequency Range  Input IP3 +23dBm  Mixer Bias Adjustable for Low Power Operation  Full Duplex Mode (RFFC5071)  2.7V to 3.3V Power Supply  Low Current Consumption  3- or 4-Wire Serial Interface Applications  Wideband Radios  Distributed Antenna Systems  Diversity Receivers  Software Defined Radios  Frequency Band Shifters  Point-to-Point Radios  WiMax/LTE Infrastructure  Satellite Communications  Wideband Jammers #RFFC5072 #Qorvo #RFMixer #FrequencySynthesizer #PLL #VCO #WidebandRF #FrequencyConverter #SDR #WirelessInfrastructure #RFDesign #MicrowaveEngineering #Telecommunications #EmbeddedSystems #ElectronicsDesign #RFIC #SignalProcessing #HardwareEngineering

Analog VCO with three waveforms (Ramp, Triangle, Square/Pulse) #CommonPartsLibrary #IntegratedCircuit #voltageControlledOscilator #

Voltage Controlled Oscillator (VCO), QFN-24 #Audio #commonpartslibrary

Voltage Controlled Oscillator (VCO), DIP-16/SOIC-16 #Audio #commonpartslibrary

Voltage Controlled Oscillator (VCO), QFN-24 VCO CEM345 ALFA QFN*1EP*4x4mm*P0.5mm*

Voltage Controlled Oscillator (VCO), DIP-18 VCO CEM345 ALFA DIP*W7.62mm*

Microwave Wideband Synthesizer with Integrated VCO #CommonPartsLibrary #IntegratedCircuit #Clock/Timing #ClockGenerator #PLLs, #FrequencySynthesizer

Voltage Controlled Oscillator (VCO), DIP-18 #Audio #commonpartslibrary

RF IC Synthesizer, VCO VSAT 7.3GHz ~ 14.6GHz SPI Interface 48-LGA (7x7) The ADF5611 allows implementation of fractional-N or integer-N phase-locked loop (PLL) frequency synthesizers when used with an external loop filter and an external reference source. The wideband microwave voltage controlled oscillator (VCO) design permits frequency operation from 7300MHz to 14,600MHz at a single RF output. A series of frequency dividers with a differential frequency output allows operation from 57MHz to 14,600MHz. Analog and digital power supplies for the PLL circuitry range from 3.15V to 3.45V, and the VCO supplies are between 4.75V and 5.25V. The ADF5611 has an integrated VCO with a fundamental frequency of 3650MHz to 7300MHz. These frequencies are internally doubled and routed to the RFOUT pin. An additional differential output allows the doubled VCO frequency to be divided by 1, 2, 4, 8, 16, 32, 64, or 128, allowing the user to generate RF output frequencies as low as 57MHz. A simple 3- or 4-wire serial port interface (SPI) provides control of all on-chip registers. To conserve power, this divider block can be disabled when not needed through the SPI. Likewise, the output power for both the single-ended output and the differential output are programmable. The integrated phase detector and Δ-Σ modulator, capable of operating at up to 100MHz, permit wide loop bandwidths and fast frequency tuning with a typical spurious level of −105dBc. With a VCO open-loop phase noise at an 100kHz offset from −115dBc/Hz at a 7.3GHz RFOUT to −109dBc/Hz at a 14.6GHz RFOUT, the ADF5611 is equipped to minimize blocker effects and to improve receiver sensitivity and transmitter spectral purity. The low phase noise floor eliminates any contribution to modulator and mixer noise floor in transmitter applications. ► RFOUT frequency range: 7300MHz to 14,600MHz ► PDIV_OUT and NDIV_OUT frequency range: 57MHz to 14,600MHz ► Fractional-N synthesizer and integer-N synthesizer modes ► Typical PFD spurious: <−105dBc ► Integrated RMS jitter at 1kHz to 100MHz integration bandwidth: <40fs ► Normalized inband phase noise floor FOM ► Integer mode: −232dBc/Hz ► Fractional mode: −229dBc/Hz ► Maintains frequency lock over −40°C to +85°C (lock and leave) ► Low phase noise VCO ► −115dBc/Hz typical at 100kHz (7.3GHz) ► −114dBc/Hz typical at 100kHz (10GHz) ► −109dBc/Hz typical at 100kHz (14.6GHz) ► RFOUT power (typical): 6dBm ► Programmable divide by 1, 2, 4, 8, 16, 32, 64, or 128 output ► Programmable output power level ► Typical power dissipation: 1W ► 48-terminal, 7 mm × 7 mm LGA package: 49 mm2 #ADF5611BCCZ #ADF5611 #FrequencySynthesizer #PLL #MicrowaveSynthesizer #RFIC #LowPhaseNoise #VCO #WirelessInfrastructure #SatelliteCommunication #MicrowaveRadio #TestAndMeasurement #AnalogDevices #RFDesign #ClockGeneration

Maxim Integrated PLL Frequency Synthesizer Single 23.5MHz to 6000MHz 32-Pin TQFN EP QFN-32 Maxim None MAX2871ETJ+ Unavailable Maxim Integrated MAX2871 ultra-wideband fractional-N / integer-N PLL frequency synthesizer with integrated VCOs, capable of generating RF frequencies from 23.5MHz to 6.0GHz. Features programmable output dividers (1/2/4/8/16/32/64/128), dual differential RF outputs with programmable output power from -1dBm to +8dBm, low phase noise performance, phase frequency detector up to 140MHz, reference frequency up to 210MHz, fast lock and cycle-slip reduction, automatic/manual VCO selection, on-chip temperature sensor with 7-bit ADC, 4-wire SPI-compatible serial interface, and operation from -40°C to +85°C. Suitable for wireless infrastructure, clock generation, microwave radios, RF signal generation, and test & measurement equipment. MAX2871 Search Keywords: MAX2871, Maxim MAX2871, Analog Devices MAX2871, PLL synthesizer, RF synthesizer, fractional N synthesizer, integer N synthesizer, 6GHz frequency synthesizer, RF signal generator IC, integrated VCO synthesizer, microwave synthesizer, SPI frequency synthesizer, dual output PLL, clock generation IC, wireless infrastructure synthesizer Hashtags: #MAX2871 #MaximIntegrated #AnalogDevices #PLLSynthesizer #FrequencySynthesizer #RFSynthesizer #FractionalNPLL #IntegerNPLL #IntegratedVCO #RFSignalGenerator #MicrowaveRadio #ClockGeneration #WirelessInfrastructure #SPIInterface #TestAndMeasurement #RFDesign #RFIC #PhaseLockedLoop

Clock Generators, PLLs, Frequency Synthesizers ADF4351BCPZ LFCSP-32_L5.0-W5.0-P0.50-BL-EP3.5 LCSC Part Number: C654681 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)/LINEAR(凌特) Analog Devices ADF4351 wideband fractional-N and integer-N PLL frequency synthesizer with integrated voltage-controlled oscillator (VCO), generating RF output frequencies from 35MHz to 4.4GHz. Features low phase noise, programmable output divider ratios (/1, /2, /4, /8, /16, /32, /64), programmable RF output power, dual-modulus prescaler (4/5 or 8/9), analog and digital lock detect, fast lock mode, cycle slip reduction, auxiliary RF output, RF mute function, and 3-wire serial programming interface. Operates from 3.0V to 3.6V and is widely used in RF signal generators, local oscillators, SDR systems, wireless infrastructure, test equipment, microwave communications, clock generation, and laboratory instrumentation. Search Keywords: ADF4351, Analog Devices ADF4351, ADF4351BRUZ, RF synthesizer, PLL synthesizer, fractional N PLL, integer N PLL, integrated VCO, 35MHz to 4.4GHz synthesizer, RF signal generator IC, microwave frequency synthesizer, local oscillator PLL, SDR synthesizer, programmable RF generator, low phase noise synthesizer, SPI PLL synthesizer, RF clock generator Hashtags: #ADF4351 #AnalogDevices #PLL #FractionalNPLL #IntegerNPLL #FrequencySynthesizer #RFSynthesizer #IntegratedVCO #RFGenerator #SignalGenerator #LocalOscillator #MicrowaveRF #SDR #ClockGenerator #RFIC #WirelessInfrastructure #TestEquipment #LowPhaseNoise #SPIInterface #ADF4351Module

USB Type-C receptacle connector providing a USB 2.0 interface for PCB top-mount applications. This surface-mount receptacle is rated for 48 VDC and 240 W, with a 5.0 A collective VBUS current rating, 6.25 A collective GND current rating, 1.25 A VCONN current rating, and an operating temperature range of -40°C to +85°C. #USBTypeC #USB2_0 #ReceptacleConnector #SMT #TopMount #48V #240W #5A #GCT #PCBComponents

USB Type-C USB 2.0 Receptacle Connector – Right-angle USB Type-C receptacle designed for consumer electronics, industrial controllers, IoT devices, embedded systems, charging equipment, portable products, and USB-enabled communication interfaces. The Same Sky (formerly CUI Devices) UJ20-C-H-G-SMT-2-P16-TR features a 24-contact (16 active + 8 dummy) USB Type-C interface supporting USB 2.0 data rates up to 480 Mbps. It is rated for 48 VDC, with 5 A on VBUS power contacts, 1.25 A on VCONN contacts, and 0.25 A on signal contacts. Designed with a surface-mount, right-angle configuration plus through-hole retention tabs, it provides enhanced mechanical strength for repeated cable insertion. Features include gold-plated contacts, shielded steel shell (SUS304), UL94 V-0 housing, 10,000 mating cycles, and an operating temperature range of −25°C to +85°C, making it ideal for reliable power and data connectivity in compact embedded designs. #SameSky #UJ20CHGSMT2P16TR #USBTypeC #USB20 #USBConnector #TypeCReceptacle #BoardToCable #SurfaceMountConnector #EmbeddedSystems #IndustrialElectronics #IoT #ConsumerElectronics

5.1GHz, 10.2GHz Center Frequency 2 V ~ 13 V Voltage Controlled Oscillator -5.5±2.5, 10±4, 9±6 dBm 25 2nd Harmonic Typ (dBc) #CommonPartsLibrary #Crystal #Oscillator #Resonator #VCOs