Pressure Sensor ±0.04PSI (±0.25kPa) Differential Male - 0.08" (1.93mm) Tube, Dual 12 b 8-DIP (0.524", 13.30mm), Dual Ports, Same Side Excellent — full picture confirmed from multiple sources. The HSCDRRN001ND2A5 is a TruStability HSC Series high accuracy digital I²C sensor with address 0x28, DIP package, dual radial barbed ports on the same side, differential pressure type, rated for ±1 inH₂O, operating on a 5.0 Vdc supply. Here's the complete spec. HIROSE Electric Engineering Specification — HSCDRRN001ND2A5 Manufacturer: Honeywell Sensing and Productivity Solutions Device Family: TruStability HSC Series General Description The HSCDRRN001ND2A5 is a high-accuracy, fully compensated and amplified differential pressure sensor manufactured by Honeywell, belonging to the TruStability HSC Series of board-mount pressure sensing devices. The device is built around a piezoresistive silicon sensing element housed within a ceramic package, combining a mature and proven sensing principle with advanced on-chip signal conditioning that makes the device ready for direct interfacing with a host microcontroller or processor without requiring extensive external analog signal processing circuitry. The defining characteristic of the TruStability HSC series, and of this device in particular, is its fully calibrated and temperature-compensated output, achieved through an integrated application-specific integrated circuit that corrects for sensor offset, sensitivity drift, temperature effects, and pressure nonlinearity across the device's rated operating range. This level of factory compensation allows the device to maintain its specified accuracy across the full compensated temperature range without requiring individual board-level calibration, significantly simplifying the design and production process for equipment that relies on precise low-pressure measurement. This particular configuration uses a digital I²C output interface, communicating pressure readings as high-resolution digital data words over a standard two-wire bus using a fixed I²C device address. This digital output makes it highly compatible with modern embedded system architectures where analog-to-digital conversion resources may be limited or where noise immunity and data integrity over longer trace runs are priorities. The device offers both high resolution and high accuracy within a tight total error band, making it suitable for applications where small differential pressure differences must be resolved reliably over time and temperature variation. The sensor is configured as a differential pressure measurement device, meaning it produces an output proportional to the difference in pressure between its two pneumatic ports rather than to absolute or gauge pressure relative to atmosphere. This makes it particularly well suited to airflow measurement, filter condition monitoring, liquid level detection, spirometry and respiratory measurement, HVAC duct pressure sensing, and other applications where the pressure difference across two points in a system is the relevant physical quantity. The device is housed in a through-hole dual in-line package with two radial barbed pneumatic port fittings located on the same side of the package body, allowing small-bore flexible tubing to be connected directly to each port without requiring additional adapter fittings. The barbed port design provides a secure, friction-held tube connection that resists accidental disconnection during normal handling and operation. The package is designed for standard through-hole PCB mounting, and the device is intended for use with non-corrosive, non-ionic dry gases only, consistent with the silicon and ceramic wetted materials used in its construction. Spec Sheet Identification Part Number: HSCDRRN001ND2A5 Series: TruStability HSC Series Manufacturer: Honeywell Sensing and Productivity Solutions Functional Classification Device Type: Board-mount piezoresistive silicon pressure sensor Sensing Type: Differential pressure Compensation: Fully calibrated and temperature compensated via integrated ASIC Accuracy Class: High accuracy, tight total error band class Output Interface Output Type: Digital I²C I²C Device Address: Fixed address 0x28 Output Resolution: High-resolution digital pressure word Applicable Interface Standards: I²C-compatible digital output Pressure Port Configuration Port Style: Dual radial barbed ports Port Orientation: Same side, both ports on the same face of the package Tubing Connection: Direct small-bore flexible tube connection via barbed fittings Media Compatibility: Non-corrosive, non-ionic dry gases only Pressure Characteristics Pressure Type: Differential Pressure Range: Very low differential pressure class, sub-inch water column range Overpressure Capability: Rated overpressure withstand above operating range Power Supply Supply Voltage: Standard logic-level supply rail class Environmental & Mechanical Operating Temperature Range: Commercial/industrial extended temperature range Compensated Temperature Range: Subset of the full operating temperature range, within which calibrated accuracy is maintained Mount Type: Through-hole Package: DIP (Dual In-line Package), standard pin pitch Application Suitability Target Applications: Airflow measurement, HVAC duct pressure sensing, filter monitoring, respiratory and spirometry equipment, liquid level detection, low-pressure process monitoring Environmental & Qualification RoHS Compliance: Yes Media Restriction: Dry, non-corrosive, non-ionic gases only; no liquid media on Port #HSCDRRN001ND2A5 #Honeywell #TruStability #HSCSeries #PressureSensor #DifferentialPressure #PiezoresistiveSensor #I2CSensor #BoardMountSensor #LowPressureSensor #AirflowSensor #HVACSensor #RespiratoryMedical #ThroughHole #DIPPackage #CompensatedSensor #TemperatureCompensated #SensorDatasheet #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant

LORA-CC68-915MHz-TCXO is a compact, high-performance LoRa wireless transceiver module from NiceRF based on the Semtech LLCC68 chipset. Operating in the 915 MHz ISM band, it features a high-precision TCXO (Temperature-Compensated Crystal Oscillator) for improved frequency stability, making it ideal for long-range, low-power IoT and industrial wireless communication applications. The module supports LoRa, FSK, and GFSK modulation schemes, provides up to +22 dBm (160 mW) transmit power, and achieves receiver sensitivity as low as -129 dBm for extended communication range. It communicates through an SPI interface and is optimized for battery-powered and low-power systems. Key Features Based on Semtech LLCC68 LoRa transceiver chip 915 MHz ISM band operation High-precision TCXO for enhanced frequency stability Supports LoRa, FSK, and GFSK modulation Up to +22 dBm (160 mW) RF output power Receiver sensitivity up to -129 dBm SPI communication interface Operating voltage: 1.8 V to 3.7 V Low receive current (~6.5 mA typical) Integrated antenna switching circuitry Compact 16 mm × 16 mm SMD package Suitable for long-range and low-power wireless applications FCC-certified 915 MHz version RoHS compliant Typical Applications Smart Metering Industrial Automation Agricultural Monitoring Smart Cities Environmental Sensors Asset Tracking Warehouse Management Remote Control Systems Street Lighting Control Battery-Powered IoT Devices #CommonPartsLibrary #Module #LoRa #LLCC68 #915MHz #TCXO #WirelessModule #RFModule #IoT #IndustrialAutomation #SmartMetering #LongRangeCommunication #LowPowerDesign #SPI #EmbeddedSystems #NiceRF

SDRAM - Mobile LPDDR4 Memory IC 48Gbit 2.133 GHz MT53E1536M32D4DT-046 WT:A is a high-density 48Gb (6GB) LPDDR4/LPDDR4X SDRAM memory device from Micron Technology. It is designed for high-performance, low-power applications requiring fast memory bandwidth and efficient power management. The device features a 32-bit data bus, supports data rates up to 4266 MT/s, and is packaged in a compact 200-ball FBGA, making it suitable for embedded computing, industrial systems, networking equipment, AI edge devices, automotive electronics, and mobile platforms. Key Features 48Gb (6GB) LPDDR4/LPDDR4X SDRAM Organized as 1.5G × 32 bits Data transfer rates up to 4266 MT/s Maximum clock frequency of 2133 MHz Low-power operation with 1.1V core supply 32-bit memory interface 200-ball FBGA package JEDEC LPDDR4-compliant architecture Per-bank refresh support Temperature-compensated refresh Self-refresh and deep power-down modes Partial-array self-refresh capability High bandwidth with reduced power consumption Optimized for compact embedded designs Operating temperature range: –30°C to +85°C Typical Applications Embedded Linux computers Single-board computers (SBCs) AI and edge computing platforms Industrial automation systems Networking and telecommunications equipment Automotive infotainment and control systems Tablets and mobile devices FPGA and SoC-based designs #commonpartslibrary #integratedcircuit #memory #dram #sdram #lpddr4 #lpddr4x #mobiledram #micron #embeddedsystems #embeddedcomputing #industrialelectronics #automotiveelectronics #edgecomputing #artificialintelligence #networking #telecommunications #highspeedmemory #lowpowerdesign #computerhardware #electroniccomponents #semiconductor #datasheet #fbga #memorychip #electronicsdesign #pcbdesign #hardwareengineering #electronicengineering #systemonchip #fpga #iot #internetofthings #computermemory #digitalelectronics #surfaceMount #smt #bga #storage #highperformancecomputing #hpc #mobiledevices #industrialautomation #electronicdesign #componentlibrary #fluxlibrary #parametricpart #eda #schematic #pcb #electronicdesignautomation #chipdesign #embeddedhardware #memorymodule #lowpowerelectronics #highbandwidthmemory #electronics #hardwaredevelopment #engineering #electricalengineering

Pressure Sensor -0.07PSI ~ 0.07PSI (-0.5kPa ~ 0.5kPa) Differential Male - 0.08" (2.00mm) Tube, Dual 16b 16-SMD Module, Dual Top Ports The SDP31-500PA belongs to the SDP3x series and uses Sensirion’s CMOSens® technology to deliver accurate and stable pressure measurements. It is optimized for applications where small size, fast response, and high accuracy are critical. This sensor measures bidirectional differential pressure up to ±500 Pa, making it suitable for airflow and gas flow monitoring systems. It provides a fully calibrated, temperature-compensated digital output via I²C, simplifying integration with microcontrollers. Pressure type: Differential (±500 Pa range) High accuracy: حوالي ±3% of measured value Digital output: I²C interface with 16-bit resolution Fast response time: suitable for real-time measurements No zero-point drift: ensures long-term stability Compact size: ~8.5 × 5.5 × 5.15 mm Low voltage operation: typically 3.0–3.6 V Temperature compensated: reliable from −40°C to +85°C #CommonPartsLibrary #Sensor #SDP3x

Pressure Sensor ±0.36PSI (±2.49kPa) Differential Male - 0.09" (2.24mm) Tube, Dual 14 b 8-DIP (0.620", 15.75mm), Dual Ports, Same Side The DLVR-L10D-E1BD-C-NI3N is a low-voltage, digital differential pressure sensor from Amphenol All Sensors' DLVR Series. It is designed to deliver highly accurate and temperature-compensated pressure measurements using proprietary CoBeam²™ sensing technology, which enhances long-term stability while minimizing package stress effects. The sensor features a 14-bit digital I²C output, operates from a 3.3 V supply, and measures differential pressures in the ±10 inH₂O range. Its compact through-hole DIP package with dual barbed ports makes it well suited for medical, HVAC, environmental monitoring, industrial control, and portable instrumentation applications. Key Features Differential pressure measurement: ±10 inH₂O 14-bit digital I²C interface 3.3 V low-voltage operation Proprietary CoBeam²™ MEMS technology for improved long-term stability Factory calibrated and temperature compensated Typical accuracy better than ±1% over temperature Dual barbed pressure ports (same-side orientation) Through-hole 8-pin DIP package Low-power operation suitable for battery-powered systems Designed for non-corrosive, non-ionic gases such as air and dry gases Ideal for medical breathing devices, HVAC, environmental monitoring, industrial automation, and portable equipment. #PressureSensor #DifferentialPressure #DigitalSensor #I2C #MEMS #AmphenolAllSensors #DLVRSeries #MedicalElectronics #HVAC #IndustrialAutomation #EnvironmentalMonitoring #EmbeddedSystems

Humidity Sensors/Temperature and Humidity Sensors SHT31-DIS-F2.5kS DFN-8_L2.5-W2.5-P0.50-BL-EP LCSC Part Number: C453460 JLCPCB Part Class: Extended Part Manufactured by Sensirion(瑞士盛思锐) Sensirion SHT3x-DIS digital humidity and temperature sensor, fully calibrated and temperature-compensated digital output, 2.15V to 5.5V supply voltage range, I2C interface up to 1MHz with two user-selectable addresses, typical accuracy up to ±1.5%RH and ±0.1°C for SHT35, NIST traceability, fast start-up and measurement time, integrated RH and temperature sensing, tiny 8-pin DFN package with 2.5 x 2.5mm footprint and 0.9mm height. Search Keywords: SHT3x-DIS, Sensirion SHT3x-DIS, SHT30-DIS, SHT31-DIS, SHT35-DIS, SHT3x humidity sensor, Sensirion humidity temperature sensor, digital humidity sensor, digital temperature sensor, I2C humidity sensor, I2C temperature sensor, SHT35 high accuracy sensor, SHT3x DFN-8, 2.5x2.5mm humidity sensor, CMOSens humidity sensor, SHT3x-DIS datasheet Hashtags: #SHT3xDIS #SHT30DIS #SHT31DIS #SHT35DIS #SensirionSHT3x #SensirionSensor #HumiditySensor #TemperatureSensor #HumidityTemperatureSensor #DigitalHumiditySensor #I2CSensor #CMOSensSensor #DFN8Sensor #25x25mmSensor #HighAccuracyHumiditySensor #NISTTraceableSensor

Pressure Sensor 2.9PSI ~ 36.26PSI (20kPa ~ 250kPa) Absolute Male - 0.19" (4.93mm) Tube 0.2 V ~ 4.9 V 6-SIP Module The MPX4250AP is an integrated silicon pressure sensor designed for measuring absolute pressure in automotive, industrial, and embedded control applications. Utilizing advanced piezoresistive sensing technology, the device provides a highly accurate analog voltage output that is directly proportional to the applied pressure. It incorporates on-chip signal conditioning, temperature compensation, and calibration circuitry to deliver stable and reliable performance across varying environmental conditions. The sensor is commonly used in engine management systems, manifold absolute pressure monitoring, altitude measurement, pneumatic controls, weather monitoring equipment, and general-purpose pressure sensing applications requiring precise and repeatable measurements. Engineering Specifications Manufacturer: NXP Semiconductors Part Number: MPX4250AP Device Type: Absolute Pressure Sensor Sensor Technology: Silicon Piezoresistive Pressure Measurement: Absolute Pressure Output Type: Analog Voltage Signal Conditioning: Integrated Temperature Compensation: Integrated Calibration: Factory Calibrated Supply Configuration: Single Supply Operation Response Time: Fast Dynamic Response Accuracy: High Accuracy Pressure Measurement Sensitivity: Optimized for Automotive and Industrial Applications Package Type: Through-Hole Unibody Package Mounting Style: Through-Hole Port Style: Single Pressure Port Operating Temperature Range: Automotive and Industrial Grade RoHS Compliant: Yes Applications: Automotive Engine Control, Manifold Pressure Monitoring, Altitude Measurement, Industrial Automation, Pneumatic Systems, Environmental Monitoring, Embedded Control Systems Key Features Integrated signal conditioning circuitry Temperature-compensated output Factory-calibrated performance High reliability and long-term stability Analog voltage output proportional to pressure Suitable for harsh automotive environments Fast response and accurate pressure sensing Simplified system integration with minimal external components #MPX4250AP #PressureSensor #AbsolutePressureSensor #NXP #PiezoresistiveSensor #AutomotiveElectronics #EngineManagement #MAPSensor #IndustrialAutomation #EmbeddedSystems #AnalogSensor #EnvironmentalMonitoring #ControlSystems #SensorTechnology #ElectronicComponents #PCBDesign #SignalConditioning #PressureMeasurement #AutomotiveSensor #IndustrialElectronics

25 MHz TCXO HCMOS Oscillator 3.3V Enable/Disable 4-SMD, No Lead ASTX-H12 25.000 MHz Abracon ASTX-H12 HCMOS output SMD TCXO, 2.5 x 2.0 x 0.9mm package, 3.2MHz to 55MHz frequency range, standard frequencies 5MHz to 44MHz, 3.3V typical supply voltage, frequency stability up to ±2.5ppm over temperature, ±2.0ppm tolerance at 25°C, low current consumption, 15pF load, 5ns max rise/fall time, tri-state standby function, MSL-1, RoHS/RoHS II compliant, suitable for cellular phones, wireless modules, GPS, RF communication and precision clock reference applications. Search Keywords: ASTX-H12, Abracon ASTX-H12, ASTX-H12 TCXO, HCMOS TCXO, SMD TCXO 2.5x2.0mm, 3.3V TCXO, 26MHz TCXO, 40MHz TCXO, 3.2MHz to 55MHz TCXO, low power TCXO, precision clock oscillator, RF reference oscillator, GPS TCXO, wireless module TCXO, ASTX-H12 datasheet Hashtags: #ASTXH12 #AbraconASTXH12 #TCXO #HCMOSTCXO #SMDOscillator #CrystalOscillator #TemperatureCompensatedOscillator #33VTCXO #25x20mmOscillator #PrecisionClock #FrequencyReference #RFOscillator #GPSOscillator #WirelessClock