MAX98357A Series 5.5V 3.2W PCM Input Class D Audio Power Amplifier - TQFN-16 The MAX98357A/MAX98357B is an easy-to-use, low-cost, digital pulse-code modulation (PCM) input Class D amplifier that provides industry-leading Class AB audio performance with Class D efficiency. The digital audio interface automatically recognizes up to 35 different PCM and TDM clocking schemes which eliminates the need for I2C programming. Operation is further simplified by eliminating the need for an external MCLK signal that is typically used for PCM communication. Simply supply power, LRCLK, BCLK, and digital audio to generate audio! Furthermore, a novel pinout allows customers to use the cost-effective WLP package with no need for expensive vias (refer to Application Note 6643: Optimize Cost, Size, and Performance with MAX98357 WLP for more information). The digital audio interface is highly flexible with the MAX98357A supporting I2S data and the MAX98357B supporting left-justified data. Both ICs support 8 channel time division multiplexed (TDM) data. The digital audio interface accepts specified sample rates between 8kHz and 96kHz for all supported data formats. The ICs can be configured to produce a left channel, right channel, or (left/2 + right/2) output from the stereo input data. The ICs operate using 16/24/32-bit data for I2S and left-justified modes as well as 16-bit or 32-bit data using TDM mode. The ICs eliminate the need for the external MCLK signal that is typically used for PCM communication. This reduces EMI and possible board coupling issues in addition to reducing the size and pin count of the ICs. The ICs also feature a very high wideband jitter tolerance (12ns typ) on BCLK and LRCLK to provide robust operation. Active emissions-limiting, edge-rate limiting, and overshoot control circuitry greatly reduce EMI. A filterless spread-spectrum modulation scheme eliminates the need for output filtering found in traditional Class D devices and reduces the component count of the solution. The ICs are available in 9-pin WLP (1.345mm x 1.435mm x 0.64mm) and 16-pin TQFN (3mm x 3mm x 0.75mm) packages and are specified over the -40°C to +85°C temperature range. ● Single-Supply Operation (2.5V to 5.5V) ● 3.2W Output Power into 4Ω at 5V ● 2.4mA Quiescent Current ● 92% Efficiency (RL = 8Ω, POUT = 1W) ● 22.8μVRMS Output Noise (AV = 15dB) ● Low 0.013% THD+N at 1kHz ● No MCLK Required ● Sample Rates of 8kHz to 96kHz ● Supports Left, Right, or (Left/2 + Right/2) Output ● Sophisticated Edge Rate Control Enables Filterless Class D Outputs ● 77dB PSRR at 1kHz ● Low RF Susceptibility Rejects TDMA Noise from GSM Radios ● Extensive Click-and-Pop Reduction Circuitry ● Robust Short-Circuit and Thermal Protection ● Available in Space-Saving Packages: 1.345mm x 1.435mm WLP (0.4mm Pitch) and 3mm x 3mm TQFN ● Solution Size with Single Bypass Capacitor is 4.32mm2 Applications ● Single Li-ion Cell/5V Devices ● Smart Speakers ● Notebook Computers ● IoT Devices ● Gaming Devices (Audio and Haptics) ● Smartphones ● Tablets ● Cameras #commonpartslibrary #integratedcircuit #linearamplifier #mono

2 Circuit IC Switch 2:1 10Ohm 10-UQFN (2.0x1.5) The TS5A23157 device is a dual single-pole doublethrow (SPDT) analog switch designed to operate from 1.65 V to 5.5 V. This device can handle both digital and analog signals. Signals up to 5.5 V (peak) can be transmitted in either direction. Features 1• Low ON-State Resistance (15 Ω at 125℃) • 125℃ Operation • Control Inputs are 5-V Tolerant • Specified Break-Before-Make Switching • Low Charge Injection • Excellent ON-Resistance Matching • Low Total Harmonic Distortion • 1.8-V to 5.5-V Single-Supply Operation • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD Performance Tested Per JESD 22 – 2000-V Human-Body Model (A114-B, Class II) – 1000-V Charged-Device Model (C101) 2 Applications • Sample-and-Hold Circuits • Battery-Powered Equipment • Audio and Video Signal Routing • Communication Circuits #commonpartslibrary #integratedcircuit #circuitswitch #TexasInstruments #AnalogSwitch #SPDT #SignalRouting #Multiplexer #LowOnResistance #HighSpeedSwitching #UQFN #EmbeddedSystems #ElectronicsDesign

ADC, Audio 32 b 8k ~ 192k I2S 20-WQFN (3x3) The PCM1822 is a high-performance, Burr-Brown™ audio analog-to-digital converter (ADC) that supports simultaneous sampling of up to two analog channels. The device supports single-ended and differential line and microphone inputs with a 1-VRMS full-scale signal. The device integrates a phase-locked loop (PLL), a DC removal high-pass filter (HPF), and supports sample rates up to 192 kHz. The device supports time-division multiplexing (TDM) or I2S audio formats, selectable with the hardware pin level. Additionally, the PCM1822 supports master and slave mode selection for the audio bus interface operation. These integrated high-performance features, along with the ability to be powered from a single supply of 3.3 V, make the device an excellent choice for costsensitive, space-constrained audio systems in far-field microphone recording applications. The PCM1822 is specified from –40°C to +125°C, and is offered in a 20-pin WQFN package. Features • Stereo high-performance ADC: – 2-channel analog microphones or line-in • ADC line and microphone differential and singleended input performance: – PCM1822 dynamic range: • 117-dB, dynamic range enhancer enabled • 111-dB, dynamic range enhancer disabled – THD+N: –95 dB • 1-VRMS full-scale input • ADC sample rate (fS) = 8 kHz to 192 kHz • Hardware pin control configurations • Linear-phase or low-latency filter selection • Flexible audio serial data interface: – Master or slave interface selection – 32-bits, 2-channel TDM – 32-bits, 2-channel I2S • Automatic power-down upon loss of audio clocks • Integrated high-performance audio PLL • Single-supply operation: 3.3 V • I/O-supply operation: 3.3 V or 1.8 V • Power consumption for 3.3-V AVDD supply: – 19.6 mW/channel at 16-kHz sample rate – 21.3 mW/channel at 48-kHz sample rate #CommonPartsLibrary #IntegratedCircuit #PCM1822IRTER #TexasInstruments #AudioADC #StereoADC #BurrBrown #I2S #TDM #AudioElectronics #EmbeddedAudio #SmartSpeaker #AVReceiver #HighResolutionAudio #PCBDesign #ElectronicsDesign #SignalProcessing

36-V, single-supply, low-power operational amplifier for cost-sensitive systems SC-70-5 #CommonPartLibrary #IntegratedCircuits #Amplifiers #Instrumentation #OPAmp #BufferAmps #Linear #TLV172

Single-Supply, Rail-to-Rail Operational Amplifiers Micro Amplifier™ Series 8-SOIC #CommonPartLibrary #IntegratedCircuits #Amplifiers #Instrumentation #OPAmp #BufferAmps #Linear #OPA2340

50-MHz Low-Distortion High-CMRR Rail-to-Rail I/O, Single-Supply Operational Amplifiers SOT-23-5 #CommonPartLibrary #IntegratedCircuits #Amplifiers #Instrumentation #OPAmp #BufferAmps #Linear #OPA365

Thermal Image Sensor 32H x 24V TO-39 # MLX90640ESF-BAB-000-TU Engineering Specifications **General Description** The MLX90640ESF-BAB-000-TU is a contactless infrared thermal imaging sensor manufactured by Melexis. It incorporates a microbolometer array that detects infrared radiation emitted by objects and converts the captured thermal energy into temperature data, enabling the creation of thermal images without physical contact. The device is designed for compact and cost-effective thermal imaging applications, offering high thermal sensitivity and accurate temperature measurement capabilities. It integrates a digital signal-processing engine, calibration data memory, and a digital communication interface, allowing direct connection to microcontrollers, embedded systems, and industrial monitoring equipment. The sensor provides real-time thermal mapping across its field of view and is suitable for applications involving human presence detection, predictive maintenance, industrial automation, smart building systems, medical screening, consumer electronics, robotics, and thermal monitoring solutions. Its factory calibration ensures stable performance throughout its operating life while minimizing external calibration requirements. **Engineering Specifications** **Manufacturer:** Melexis **Manufacturer Part Number:** MLX90640ESF-BAB-000-TU **Component Type:** Infrared thermal imaging sensor **Sensor Technology:** Microbolometer thermal sensor array **Measurement Method:** Non-contact infrared temperature sensing **Output Type:** Digital thermal image data **Communication Interface:** I²C-compatible serial interface **Temperature Measurement Capability:** Object temperature monitoring and thermal imaging **Thermal Imaging Function:** Real-time thermal map generation **Integrated Processing:** On-chip signal processing and calibration management **Calibration:** Factory calibrated with stored calibration parameters **Power Supply Configuration:** Single-supply operation **Power Consumption:** Optimized for low-power embedded applications **Refresh Rate:** Programmable thermal frame refresh operation **Thermal Sensitivity:** High-sensitivity infrared detection **Field of View Variant:** Wide-angle thermal imaging configuration **Accuracy Characteristics:** High-precision temperature measurement with integrated compensation algorithms **Memory Features:** Internal EEPROM for calibration coefficients **Operating Mode:** Continuous and programmable thermal acquisition **Data Output Format:** Digital temperature and thermal pixel information **Environmental Stability:** Designed for reliable operation across varying ambient conditions **Electromagnetic Compatibility:** Suitable for embedded and industrial electronic systems **Package Type:** Surface-mount package with infrared-transparent window **Mounting Style:** Surface mount technology **Package Construction:** Reflow-solderable assembly **Lead Finish:** Lead-free finish **Environmental Compliance:** RoHS compliant and halogen-free **Reliability Features:** Factory-tested and production-calibrated thermal imaging device **Typical Applications** Thermal cameras Human presence detection systems Occupancy monitoring Industrial predictive maintenance Electrical equipment inspection Smart building automation HVAC monitoring systems Medical screening devices Consumer electronics Robotics and autonomous systems Fire detection and prevention systems Industrial process monitoring Energy management systems Automotive thermal sensing applications Security and surveillance equipment #MLX90640 #MLX90640ESF #Melexis #ThermalSensor #InfraredSensor #ThermalImaging #Microbolometer #TemperatureSensor #IndustrialAutomation #EmbeddedSystems #IoT #PredictiveMaintenance #SmartBuilding #ThermalCamera #ElectronicComponents #EngineeringSpecifications

Accelerometer X, Y, Z Axis ±5g 1.6kHz (X,Y), 550Hz (Z) 16-LFCSP-LQ (4x4) The ADXL325 is a small, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±5 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration, resulting from motion, shock, or vibration. The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected to suit the application with a range of 0.5 Hz to 1600 Hz for X and Y axes and a range of 0.5 Hz to 550 Hz for the Z axis. The ADXL325 is available in a small, low profile, 4 mm × 4 mm × 1.45 mm, 16-lead, plastic lead frame chip scale package (LFCSP_LQ). 3-axis sensing Small, low profile package 4 mm × 4 mm × 1.45 mm LFCSP Low power: 350 μA typical Single-supply operation: 1.8 V to 3.6 V 10,000 g shock survival Excellent temperature stability Bandwidth adjustment with a single capacitor per axis RoHS/WEEE lead-free compliant #CommonPartsLibrary #Sensor #Transducer #Motion-Sensor #Accelerometer #ADXL325

Single-Supply, Rail-to-Rail Operational Amplifiers Micro Amplifier™ Series 8-SOIC #CommonPartLibrary #IntegratedCircuits #Amplifiers #Instrumentation #OPAmp #BufferAmps #Linear #OPA340

16-Bit, 500-kSPS, 4-Channels, Single-Supply, SAR ADC with Bipolar Input Range, TSSOP-38 adc analog digital spi bipolar input TSSOP*4.4x9.7mm*P0.5mm*

8-Bit Single-Supply Bus Transceiver With 5V tolerant input voltage and 3-State Outputs 24mA, TSSOP-20 Noninverting Bidirectional TSSOP*4.4x6.5mm*P0.65mm*

High-Speed, Low-Power, 3V/5V, Rail-to-Rail, Single-Supply Comparator, SOIC-8 single comparator SOIC*3.9x4.9mm*P1.27mm*

ADC, Audio 768k I²C, SPI 24-WQFN (4x4) The TLV320ADC3140 is a Burr-Brown™ highperformance, audio analog-to-digital converter (ADC) that supports simultaneous sampling of up to four analog channels or eight digital channels for the pulse density modulation (PDM) microphone input. The device supports line and microphone inputs, and allows for both single-ended and differential input configurations. The device integrates programable channel gain, digital volume control, a programmable microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for sample rates up to 768 kHz. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with either the I2C or SPI interface. These integrated high-performance features, along with the ability to be powered from a single-supply of 3.3 V or 1.8 V, make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications. #commonpartslibrary #integratedcircuit #adc #audio