General Purpose Relay DPDT (2 Form C) Through Hole #CommonPartsLibrary #Relay #Signal-relay #G5V-2

Low Signal Relays - PCB 2 Form A 5V 30VDC PCB Terminal Telecom Relay DPDT (2 Form C) Through Hole #CommonPartsLibrary #relay #signal-relay #TQ2-L

Signal Relay 9VDC 1A DPDT( (20.5mm 10.1mm 11.5mm)) THT Signal relay designed for low-signal and general-purpose switching, featuring a DPDT (2 Form C) contact configuration with a 9 VDC high-sensitivity coil. It supports 1 A switching current at up to 125 VAC or 125 VDC, uses through-hole PCB mounting, and provides a fully sealed construction with 7 ms maximum operate time and 3 ms maximum release time. #SignalRelay #DPDTRelay #GeneralPurposeRelay #HighSensitivityRelay #9VDC #ThroughHole #PCBRelay #ElectromechanicalRelay #G5V2H1DC9 #Aratas

Signal Relay 12VDC 2A DPDT(20.2x10x11.5)mm THT #Signal-relay #Relay

Mid-Range Relays, 2 Form C, DPDT, 2 C/O, Coil Suppression Diode, Gold Terminal Plating, 5 A, 28 VDC Coil Voltage, CII FCB-205 Series The M83536/2-024M is a hermetically sealed electromechanical power relay built to comply with the MIL-PRF-83536 military specification family, a standard governing high-reliability relays intended for use in demanding military, aerospace, and defense electronic systems. Devices manufactured under this specification series are designed to meet stringent requirements for mechanical ruggedness, electrical performance consistency, and long-term reliability under the extreme vibration, shock, temperature cycling, and altitude conditions typically encountered in airborne, shipboard, and ground military platforms. This relay is configured as a double-pole, double-throw switching device, meaning it provides two independently switched sets of contacts that can each connect to one of two possible circuit paths, controlled by a single energized coil. This configuration is commonly used in applications requiring simultaneous switching of two separate circuits, such as redundant power path switching, dual-channel signal routing, or coordinated control of multiple subsystems from a single control signal. The relay operates on momentary, non-latching actuation, meaning the contacts return to their de-energized state as soon as coil power is removed, rather than remaining in their last-commanded position. The coil is designed for direct-current control voltage typical of military and aerospace 28-volt electrical systems, a standard power bus voltage used extensively in aircraft, military vehicles, and shipboard electrical systems. The device's flange-style mounting construction allows it to be securely fastened to a chassis or panel, providing the mechanical stability needed to maintain reliable contact performance under the sustained vibration and shock loading common in military platform environments. Internal contact construction uses a silver-cadmium-oxide contact material, chosen for its strong arc-resistance and resistance to contact welding under repeated switching of inductive or resistive loads. As a hermetically sealed device manufactured to a formal military specification, the relay undergoes rigorous qualification and lot-acceptance testing to verify long-term mechanical and electrical performance, including extended life-cycle switching tests, vibration and shock qualification, and environmental exposure testing. This makes the part suitable for use in flight-critical, mission-critical, or other high-reliability electromechanical switching applications where field failure is not an acceptable risk. The relay is supplied with through-hole solder-pin terminations for both coil and contact connections, supporting traditional through-hole assembly methods consistent with the conservative, well-proven manufacturing processes favored in military and aerospace hardware production. Spec Sheet Identification Part Number: M83536/2-024M Specification Family: MIL-PRF-83536 Manufacturer: TE Connectivity (CII) Functional Classification Device Type: Electromechanical power/signal relay Contact Configuration: Double-pole, double-throw (DPDT) Actuation Type: Momentary, non-latching Coil Input Type: DC control Electrical Characteristics Coil Voltage: Military-standard 28V DC class Coil Resistance: Moderate coil resistance class Contact Rating: Mid-range current switching class Contact Voltage Rating: Compatible with 28V DC and standard AC switching voltages Output Type: AC/DC switching capable Contact & Construction Details Contact Material: Silver-cadmium-oxide (AgCdO) Contact Form: 2 Form C (DPDT, normally open/normally closed) Sealing: Hermetically sealed construction Mounting Style: Flange mount, through-hole Environmental & Qualification Specification Compliance: MIL-PRF-83536 military relay specification Application Class: Military and aerospace electromechanical switching Export Classification: EAR99 export control classification RoHS Compliance: Yes Mechanical Specifications Termination: Solder pin, through-hole Mounting Type: Through-hole, flange-mounted Build Style: Mid-range relay form factor consistent with the M83536 family Packaging Supply Format: Individually packaged per military relay handling and ESD protection standards #M83536 #TEConnectivity #MilitaryRelay #AerospaceRelay #MILPRF83536 #DPDTRelay #ElectromechanicalRelay #HermeticallySealed #PowerRelay #SignalRelay #DefenseElectronics #AviationElectronics #FlangeMount #ThroughHole #MilAeroComponent #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #HighReliabilityRelay

General Purpose Relay SPDT (1 Form C) Through Hole #Relay #signal-relay

General Purpose Relay DPDT (2 Form C) Through Hole #Relay #Signal-Relay #J104D

Signal Relay for switching low-level signal and general-purpose loads, featuring a DPDT (2 Form C) contact configuration with a 5 VDC coil. Rated for 2A switching current at up to 30 VDC or 125 VAC, with a surface-mount package designed for compact PCB applications. #SignalRelay #DPDT #2FormC #5VDC #2A #SurfaceMount #Omron

Telecom Relay DPDT (2 Form C) Through Hole Relay, miniature signal relay designed for switching low-level signal and general-purpose loads. The G6S-2 DC5 is a 2-pole (DPDT), non-latching relay with a 5 VDC coil, featuring bifurcated crossbar contacts for high contact reliability. It is rated to switch up to 2 A at 30 VDC or 0.5 A at 125 VAC, provides 1,500 VAC dielectric strength between coil and contacts, and is available in a compact through-hole PCB package suitable for high-density circuit designs. #Relay #SignalRelay #DPDT #5VDC #ThroughHole #PCBRelay #Omron #ElectromechanicalRelay #BifurcatedContacts #2A

Telecom Relay DPDT (2 Form C) Surface Mount The G6K-2F-Y DC5 specification defines the engineering requirements for a low-profile dual-pole signal relay designed for precision switching in electronic control and communication systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure reliable signal switching, low contact resistance, and long-term operational stability in compact electronic assemblies. The relay is intended for use in telecommunications equipment, instrumentation, industrial control systems, automated test equipment, and embedded electronic applications requiring high-reliability signal routing. It provides electrically isolated switching with low power consumption and stable contact performance, making it suitable for low-level signal and logic circuit applications. Engineering Requirements The relay shall be manufactured using qualified electromechanical components and controlled production processes to ensure consistent switching characteristics, mechanical durability, and long service life. The internal contact system shall provide reliable electrical continuity and repeatable switching performance throughout the specified operational life. Electrical characteristics shall ensure stable contact resistance, low coil power consumption, high insulation resistance, and reliable dielectric isolation between coil and contact circuits. The relay shall maintain dependable switching performance under specified voltage, current, temperature, and environmental operating conditions. Mechanical construction shall provide accurate contact alignment, secure enclosure integrity, and resistance to vibration, shock, and thermal cycling. The package shall be suitable for printed circuit board mounting and compatible with standard electronic assembly and soldering processes without degradation of performance. Workmanship shall be free from defects including contamination, corrosion, mechanical deformation, contact misalignment, or structural irregularities that could adversely affect electrical or mechanical reliability. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with all applicable engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical performance specifications, qualification reports, inspection records, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #SignalRelay #ElectromechanicalRelay #ElectronicSwitching #IndustrialElectronics #EmbeddedSystems #Telecommunications #QualityAssurance #EngineeringDocumentation #ElectronicComponents

General Purpose Relays SPDT 1A 5VDC STD SLD #Relay #Signal-relay #TSC, OEG #1-1419130-0

General Purpose Relay DPDT (2 Form C) Through Hole #CommonPartsLibrary #Relay #Signal-Relay

General Purpose Relay SPDT (1 Form C) Through Hole #CommonPartsLibrary #Relay #SPDT #Signal-Relay

General Purpose Relay DPDT 2A 1.5VDC (2 Form C) Through Hole #Commonpartslibrary #Relay #Signalrelay