0.250" (6.35mm) Quick Connect Male Solder Connector Non-Insulated #CommonPartsLibrary #Connector #Terminal #Quick #Faston #1217167

0.250" (6.35mm) Quick Connect Male Solder Connector Non-Insulated #CommonPartsLibrary #Connector #Terminal #Quick-Connect #19705

Electronic Fuse Regulator High-Side 10A 10-VQFN-HR (2x2) The TPS25981xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short circuits, voltage surges and excessive inrush current. Output slew rate and inrush current can be adjusted using a single external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current (during startup) or breaking the circuit (during steady-state). The overcurrent protection threshold as well as the transient overcurrent blanking timer are useradjustable. The current limit control pin also functions as an analog load current monitor. The devices are available in a 2-mm × 2-mm, 10- pin HotRod™ QFN package for improved thermal performance and reduced system footprint. The devices are characterized for operation over a junction temperature range of –40°C to +125°C. • Wide operating input voltage range: 2.7 V to 16 V – 20-V absolute maximum • Integrated FET with low on-resistance: RON = 6 mΩ (typ.) • Fast overvoltage protection – Adjustable overvoltage lockout (OVLO) with 1.2-μs (typ.) response time • Overcurrent protection with load current monitor output (ILM) – Circuit-breaker response – Adjustable threshold (ILIM) 1.5 A – 11 A • ±10% accuracy for ILIM > 5 A – Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM – Output load current monitor accuracy: ±10% (IOUT ≥ 3 A) • Fast-trip response for short-circuit protection – 640-ns (typ.) response time – Adjustable (2 × ILIM) and fixed thresholds • Active high enable input with adjustable undervoltage lockout threshold (UVLO) • Active low enable input with adjustable undervoltage lockout threshold (OVLO) • Adjustable output slew rate control (dVdt) • Option to drive external FET for reverse current blocking in disabled/OFF state • Overtemperature protection • Quick Output Discharge • Digital outputs – Power Good (PG) and fault indication (FLT) • UL 2367 recognition (pending) • IEC 62368 CB certification (pending) • Small footprint: QFN 2-mm × 2-mm, 0.45-mm pitch #CommonPartsLibrary #IntegratedCircuit #PowerManagement

0.187" (4.75mm) Quick Connect Male Solder Connector Non-Insulated #CommonPartsLibrary #Connector #Terminal #Quick-Connect #19708

Seeed Studio XIAO Expansion Board is a powerful functional expansion board for Seeed Studio XIAO series of only half Raspberry Pi 4 size. It enables building prototypes and projects in an easy and quick way. With its rich peripherals, you could explore the infinite possibilities of Seeed Studio XIAO series. Circuit python is also well supported by this board.

0.250" (6.35mm) Quick Connect Male Solder Connector Non-Insulated #commonpartslibrary #connector #malesolder

0.205" (5.21mm), 0.250" (6.35mm) Quick Connect Female Solder Connector Non-Insulated #CommonPartsLibrary #Connector #Terminal #QuickConnect

Automotive High-Side Load Switch IC – Single-channel high-side load switch optimized for automotive power distribution, ADAS, infotainment, body electronics, industrial control, and embedded power management. Operates from a 1.5 V to 5.5 V control supply and switches 0.8 V to 5.5 V load voltages, delivering up to 3 A continuous output current with an ultra-low 19 mΩ (typical) ON resistance for minimal power loss. Features controlled slew-rate switching to reduce inrush current, integrated quick output discharge (QOD), fixed current limiting, thermal shutdown, reverse current blocking (when disabled), and low quiescent current for efficient operation. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient temperature range and is housed in a compact 6-pin SOT-23 Thin (TSOT-23-6) package. #TexasInstruments #TPS22995HQDDCRQ1 #TPS22995 #LoadSwitch #HighSideSwitch #PowerDistribution #PowerManagement #CurrentLimiting #AutomotiveElectronics #AECQ100 #SOT236 #EmbeddedSystems

Electronic Fuse Regulator 4A 8-WSON (2x2) eFuse providing input power-path protection with adjustable current limiting and fast overvoltage protection for 3 V to 18 V input supplies, supporting 0.5 A to 4 A load current. The TPS259535DSGR features 34 mΩ typical on-resistance, a 5.7 V typical output overvoltage clamp, auto-retry after thermal shutdown, active-high enable with adjustable UVLO, and quick output discharge, all in an 8-pin WSON package. #TexasInstruments #TPS259535DSGR #eFuse #PowerManagement #HotSwap #OvervoltageProtection #CurrentLimiting #UVLO #QuickOutputDischarge #WSON8

Single-channel high-side N-channel load switch for power distribution, supporting an input voltage range of 1.0 V to 5.5 V and up to 3 A continuous output current. Features 25 mΩ typical ON resistance, controlled slew rate, quick output discharge (150 Ω), thermal shutdown protection, and a non-inverting ON/OFF control input. Housed in a 4-pin UQFN-HR (0.85 × 0.75 mm) package. #TexasInstruments #TPS22991 #TPS22991BRAAR #LoadSwitch #PowerSwitch #HighSideSwitch #PowerManagement #PMIC #NChannel #3A #LowRon #UQFN4 #EmbeddedSystems

Power Connector Receptacle, Female Sockets NEMA 5-15R Panel Mount, Snap-In AC Power Receptacle, IEC C14 inlet connector designed for PCB or panel mounting applications. It features a 3-position IEC 60320 C14 interface with a rated voltage of 250 VAC and current rating of 10 A. The receptacle is designed for use with standard C13 power cords and is available with a 0.250 inch quick disconnect terminal configuration. #ACReceptacle #IECConnector #C14Inlet #PowerConnector #PCBComponent

USB charging port controller integrating QC 2.0/3.0 anc BC1.2 Protocol, TSOT-23-8 USB Quick Charge TSOT?23*

0.250" (6.35mm) Quick Connect Male Solder Connector Non-Insulated #CommonPartsLibrary #Connector #Interconnect #Terminal #Quick-Connect #Faston #928814

2-Position PCB Terminal Block (COMBICON Pluggable Header) – 2-position pluggable PCB terminal block header designed for industrial automation, power supplies, control systems, instrumentation, HVAC equipment, IoT devices, and embedded electronics. Part of the Phoenix Contact COMBICON MSTB Series, it features a 5.08 mm pitch, vertical through-hole PCB mounting, and plug-in wire-to-board connection for quick field wiring and maintenance. Rated for 16 A and 320 V (UL) / up to 630 V (IEC, application dependent), it accepts compatible MSTB 2,5 pluggable terminal plugs. Constructed with tin-plated copper alloy contacts and a green UL94 V-0 polyamide housing, it provides secure, reliable electrical connections in demanding industrial environments. Designed for solder termination, it operates over a −40°C to +105°C temperature range and is ideal for modular embedded and industrial power connections. #PhoenixContact #1718760 #COMBICON #MSTBSeries #TerminalBlock #PluggableConnector #WireToBoard #PCBConnector #IndustrialAutomation #PowerSupply #EmbeddedSystems

Low-dropout (LDO) linear voltage regulator providing a fixed 3.3 V output with up to 500 mA output current. It operates from a 2.0 V to 6.0 V input supply and features 120 mV typical dropout voltage at 100 mA, 65 dB PSRR at 1 kHz, 50 μs typical startup time, built-in quick discharge, current limiting, and short-circuit protection. #LDO #LinearRegulator #VoltageRegulator #3.3V #500mA #HighPSRR #LowDropout #PowerManagement #CMOS #ShortCircuitProtection #CurrentLimit

The BOSCH BMM350 is a high-performance 3-axis magnetic sensor designed for a wide range of consumer applications, including magnetic compass functionality, virtual/augmented/mixed reality applications, high-end gaming, platform stabilization for image stabilization, and indoor navigation and dead-reckoning in robotics. Manufactured by Bosch Sensortec, this component leverages Tunnel Magneto Resistance (TMR) technology to provide precise magnetic-to-digital conversion. The BMM350 is housed in an ultra-small Wafer Level Chip Scale Package (WLCSP) measuring 1.28mm x 1.28mm x 0.5mm, making it ideally suited for mobile applications where space is at a premium. It features digital interfaces (I2C, I3C) for flexible system integration and operates across a wide voltage range from 1.72V to 3.6V. This sensor is designed to deliver high performance with an excellent temperature behavior characterized by low temperature coefficients for offset (TCO) and sensitivity (TCS), ensuring reliability and accuracy across its operational temperature range of -40°C to +85°C. Each device is tested and calibrated, ready for integration into a variety of applications, supported by an API for quick system development.

IC SURGE STOPPER 2.7V~18V WSON-8-EP(2x2) The TPS2595xx family of eFuses (integrated FET hot swap devices) is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short circuits, voltage surges, and excessive inrush current. Output current limit level can be set with a single external resistor. It is also possible to get an accurate sense of the output load current by measuring the voltage drop across the current limit resistor. Applications with particular inrush current requirements can set the output slew rate with a single external capacitor. Overvoltage events are quickly limited by internal clamping circuits to a safe fixed maximum, with no external components required. The TPS259573 variant provides an option to set a user-defined overvoltage cutoff threshold. Quick output discharge function can be implemented in the TPS2595x5 variants by connecting the OUT pin to the QOD pin. The devices are characterized for operation over the temperature range of –40°C to +125°C. 1• Wide Input Voltage Range: 2.7 V to 18 V – 20 V Absolute Maximum – 3 V to 18 V for TPS2595x5 Version • Low On-Resistance: RON = 34 mΩ (Typical) • Fast Overvoltage Protection Clamp (3.8-V, 5.7-V, and 13.7-V options) With a Response Time of 5 µs (Typical) • TPS2595x0, TPS2595x1, TPS2595x5: Active High Enable Input With Adjustable Undervoltage Lockout (UVLO) • TPS2595x3: Active Low Enable Input With Adjustable Overvoltage Lockout (OVLO) • Adjustable Current Limit With Load Current Monitor Output (ILM) – Current Range: 0.5 A to 4 A – Current Limit Accuracy: ±7.5% • Adjustable Output Slew Rate Control (dVdt) • Over Temperature Protection (OTP) • Fault Indication Pin (FLT ) • UL 2367 Recognition – File No. E169910 – RILM >= 487 Ω (4.42 A maximum) • IEC 62368-1 Certified • Safe During Single Point Failure Test (IEC 62368- 1) – ILM Pin Open/Short Detection #CommonPartsLibrary #IntegratedCircuit #PowerManagement