2 Position Wire to Board Terminal Block Vertical with Board 0.138" (3.50mm) Surface Mount The 1250360000 is a high-quality PCB terminal block manufactured by Weidmüller, designed for secure and reliable wire-to-board connections. It features a robust screw-clamp connection system that ensures strong mechanical retention and excellent electrical conductivity. This component is widely used in industrial control systems, power distribution modules, and automation equipment where dependable field wiring is required. The terminal block is designed for easy installation on printed circuit boards and supports solid or stranded wires. Its durable housing material provides resistance to environmental stress, making it suitable for long-term operation in demanding applications. Key Features Screw clamp connection for secure wire termination Through-hole PCB mounting for strong mechanical stability High current carrying capability مقاust insulating housing with flame-retardant properties واضحة labeling area for easy identification Suitable for industrial and automation applications Electrical Characteristics Rated Voltage: 300 V (typical, verify datasheet) Rated Current: Up to 10–16 A (depending on wire size) Contact Resistance: Low (optimized for power applications) Insulation Resistance: High (>10⁸ Ω typical) Mechanical Characteristics Mounting Type: Through-Hole PCB Connection Type: Screw Clamp Number of Positions: Typically 2–12 positions (variant dependent) Wire Gauge Range: ~24 AWG to 12 AWG (approx.) Pitch: Typically 5.00 mm or 5.08 mm (verify exact variant) Material Information Housing Material: Polyamide (PA), flame-retardant (UL94 V-0) Contact Material: Copper alloy Contact Plating: Tin-plated Environmental Characteristics Operating Temperature Range: -40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Industrial control systems Power supply units Automation and PLC systems Signal and power distribution boards Building and factory wiring interfaces Notes Exact electrical ratings and pitch may vary depending on the specific configuration under this series. Always refer to the official Weidmüller datasheet for precise parameters before design integration. #commonpartslibrary #connector #terminalblock

PLC Digital Input Modules Interface 8-SOIC #CommonPartsLibrary #IntegratedCircuit #Interface #Specialized #ISO1211

General Purpose Digital Isolator 5000Vpk 2 Channel 100Mbps 50kV/µs CMTI 8-SOIC (0.295", 7.50mm Width) General Description The STISO621WTR is a high-performance quad-channel isolated digital input interface IC from STMicroelectronics. It is designed to interface industrial digital inputs (such as PLC inputs) with low-voltage logic systems while providing galvanic isolation for improved safety and noise immunity. This device integrates four independent input channels, each capable of handling high-voltage input signals, and converts them into isolated logic-level outputs. It is ideal for industrial automation, programmable logic controllers (PLCs), and factory control systems where robust signal isolation is required. Key Features Quad isolated digital input channels High common-mode transient immunity (CMTI) Wide input voltage range for industrial signals Integrated current limiting and protection circuitry Compatible with 3.3V and 5V logic outputs Low power consumption High noise immunity and ESD robustness Complies with industrial safety standards Electrical Characteristics Number of Channels: 4 Isolation Type: Galvanic isolation Input Voltage Range: Up to ~30 V (industrial input level) Logic Output Voltage: 3.3 V / 5 V compatible Propagation Delay: Typically low (tens of ns range) Supply Voltage (Vcc): 3.0 V to 5.5 V Operating Temperature Range: -40°C to +125°C Functional Description Each input channel accepts a high-voltage industrial signal and converts it into a corresponding isolated digital output. Internal circuitry provides: Input current limiting Signal conditioning Isolation barrier Output buffering The isolation barrier protects low-voltage control electronics from high-voltage transients, ground loops, and electrical noise. Package Information Package Type: SO-16 (Wide body) Mounting: Surface-mount (SMD) Tape & Reel: Yes (TR suffix) Pin Count: 16 pins Applications Programmable Logic Controllers (PLC) Industrial I/O modules Factory automation systems Motor control interfaces Process control equipment Building automation Advantages Eliminates need for external optocouplers Reduces PCB space and BOM cost Improves system reliability High-speed digital isolation vs traditional opto-isolators Compliance & Standards Industrial-grade reliability ESD protection compliant RoHS compliant Manufacturer Information Manufacturer: STMicroelectronics Part Number: STISO621WTR Series: STISO #commonpartslibrary #isolator

REL-MR- 12DC/21-21AU - Plug-in miniature power relay, with multi-layer gold contact, 2 changeover contacts, input voltage 12 V DC General Purpose Relay DPDT (2 Form C) 12VDC Coil Through Hole The Phoenix Contact 2961299 (REL-MR-12DC/21-21AU) is a plug-in miniature power relay designed for reliable switching in industrial automation, control panels, and interface applications. It features a 12 VDC monostable coil, 2 changeover (DPDT) contacts, and hard gold-plated AgNi contacts, making it suitable for switching low-level signals with high reliability. The relay is RT III sealed (wash-proof), ensuring protection against contaminants during PCB cleaning and harsh industrial environments. It is intended for use with compatible Phoenix Contact relay bases and accessories. Key Features 12 VDC monostable coil operation 2 changeover (DPDT) contacts Hard gold-plated AgNi contacts for reliable low-level signal switching RT III sealed (wash-proof) construction Mechanical life: up to 30 million operations 5 kV coil-to-contact isolation Fast operate and release times (typ. 7 ms / 3 ms) Designed for industrial control, PLC interfaces, automation, and switching applications Compatible with Phoenix Contact relay sockets and interface modules #PhoenixContact #Relay #PowerRelay #DPDTRelay #IndustrialAutomation #ControlPanel #PLC #InterfaceRelay #12VDC #ElectromechanicalRelay

Power Switch/Driver 1:1 N-Channel 500mA PowerSSO-12 8-channel protected high-side 12 V output switch IC The VNI2140J is a monolithic device designed using STMicroelectronics' VIPower technology. The device drives two independent resistive or inductive loads with one side connected to ground. Active current limitation prevents a drop in system power supply in cases of shorted-load, and built-in thermal shutdown protects the chip from damage due to overtemperature and short-circuit. In overload conditions, channel turns OFF and ON automatically to maintain the junction temperature between TTSD and TR. If the case temperature reaches TCSD, the overloaded channel is turned OFF and restarts only when case temperature decreases down to TCR. In order to avoid high-peak current from the supply, when more than one channel is overloaded the TCSD restart is not simultaneous. Non overloaded channels continue to operate normally. The open-drain diagnostics output indicates overtemperature conditions and open-load in OFF-state. Features • Nominal current: 0.75 A per channel • Shorted-load protections • Junction overtemperature protection • Case overtemperature protection for thermal independence of the channels • Thermal case shutdown restart not simultaneous for the various channels • Protection against loss of ground • Current limitation 1 A per channel • Undervoltage shutdown • Open-load in OFF-state and short to VCC detection • Open-drain diagnostic outputs • 3.3 V CMOS/TTL compatible inputs • Fast demagnetization of inductive loads • Conforms to IEC 61131-2 Applications • Programmable logic control • Industrial PC peripheral input/output • Numerical control machines #VNI2140J #STMicroelectronics #VIPower #HighSideSwitch #SolidStateRelay #PowerManagement #IndustrialAutomation #PLC #LoadDriver #PowerSSO12

Power Distribution Switches TPS27S100BRRKT VQFN-16_L4.0-W3.5-P0.50-BL-EP LCSC Part Number: C1849488 TPS27S100 / TPS27S100A / TPS27S100B – single-channel smart high-side power switch with integrated NMOS and charge pump, designed for industrial, automation, telecom, and programmable logic controller (PLC) applications. Supports operating voltages from 3.5 V to 40 V and load currents up to 4 A. Features adjustable current limiting, integrated diagnostics, current monitoring, overload protection, short-circuit protection, thermal shutdown, undervoltage lockout (UVLO), inductive load clamping, and extensive ESD/surge immunity. Available with either digital fault reporting or analog current-sense output for intelligent load management and system protection. Search Keywords: TPS27S100, TPS27S100A, TPS27S100B, Smart High Side Switch, High Side Power Switch, Industrial Load Switch, Protected Load Driver, Current Sense Switch, Industrial Power Distribution, PLC Output Driver, High Side Driver IC, NMOS High Side Switch, Adjustable Current Limit Switch, Short Circuit Protection Switch, Overload Protected Switch, Industrial Automation Power Switch, 24V Load Driver, Telecom Power Switch, Diagnostic Power Switch, Texas Instruments TPS27S100 Hashtags: #TPS27S100 #TPS27S100A #TPS27S100B #TexasInstruments #HighSideSwitch #SmartSwitch #LoadDriver #PowerSwitch #CurrentSense #IndustrialAutomation #PLC #IndustrialControl #TelecomElectronics #PowerDistribution #CircuitProtection #EmbeddedSystems #ElectronicsDesign #PCBDesign #IndustrialElectronics #PowerManagement

Analog Devices AD74413R is a quad-channel software-configurable analog and digital input/output (I/O) controller designed for industrial automation, process control, building management, and smart sensing systems. Each channel can be independently configured as voltage input, current input, voltage output, current output, digital input, RTD temperature measurement, or thermocouple interface, enabling highly flexible universal I/O architectures. The device integrates four 16-bit sigma-delta ADCs, four 13-bit DACs, precision voltage references, diagnostics, open-circuit and short-circuit detection, internal temperature monitoring, and HART communication support. Communication with the host processor is performed through an SPI interface. The AD74413R simplifies PLC, DCS, remote I/O, industrial sensor, actuator, and process instrumentation designs by replacing multiple dedicated analog front-end components with a single programmable I/O solution. Search Keywords: AD74413R, Analog Devices universal I/O, software configurable I/O, industrial I/O controller, analog input output IC, programmable PLC I/O, process control interface, RTD measurement IC, thermocouple interface IC, HART compatible I/O, SPI industrial interface, voltage input output controller, current loop controller, universal analog front end, remote I/O module IC, industrial automation controller AD74413R Hashtags: #AD74413R #AnalogDevices #UniversalIO #IndustrialAutomation #ProcessControl #PLC #RemoteIO #HART #RTD #Thermocouple #AnalogInput #AnalogOutput #CurrentLoop #IndustrialElectronics #SPIInterface #DAC #ADC #BuildingAutomation #Instrumentation #ElectronicComponentsQuad-Channel, Software Configurable Input and Output

MSTB2.5/7-GF-5.08 1924130 Phoenix Contact MSTB 2,5 HC/..-GF series PCB header connectors are high-current pluggable terminal block headers designed for industrial control, power distribution, automation, and embedded electronics applications. The connectors support a nominal wire cross-section of 2.5 mm², rated current up to 16 A, and rated voltage up to 320 V. Featuring screw-lock flanges for enhanced mechanical stability, wave-solder THT mounting, and compatibility with COMBICON MSTB pluggable terminal blocks, the series provides reliable field wiring connections in industrial environments. The standardized pin alignment and robust threaded flange design ensure secure mating and vibration resistance in control cabinets, power supplies, PLCs, motor drives, and industrial automation equipment. Search Keywords: Phoenix Contact MSTB 2.5 HC, MSTB 2,5 HC, MSTB 2.5 HC/07-GF, 1924130, PCB Header Connector, Pluggable Terminal Block Header, COMBICON MSTB, Phoenix Contact Terminal Block, Industrial Connector, Screw Lock Connector, Threaded Flange Connector, THT Terminal Block, High Current PCB Connector, 16A Terminal Block, 320V Connector, Control Cabinet Connector, PLC Connector, Industrial Automation Connector, Power Distribution Connector, Field Wiring Connector Hashtags: #PhoenixContact #MSTB25HC #COMBICON #TerminalBlock #PCBConnector #PluggableConnector #IndustrialConnector #IndustrialAutomation #ControlSystems #PowerDistribution #THTConnector #ScrewTerminal #EmbeddedHardware #ElectronicsDesign #PCBDesign #IndustrialElectronics #PowerElectronics #PLC #HardwareEngineering #ElectricalEngineering

ISO1412BDW SOIC-16_L10.3-W7.5-P1.27-LS10.3-BL LCSC Part Number: C1544462 ISOW1412 Texas Instruments ISO14xx Series (ISO1410, ISO1412, ISO1430, ISO1450, ISO1452) – galvanically isolated RS-485/RS-422 transceivers designed for industrial communication networks. Combines differential bus transceiver functionality with integrated isolation barrier, providing robust protection against ground potential differences, electrical noise, ESD, EFT, and transient events. Supports up to 50 Mbps data rates, 1/8-unit-load operation for up to 256 nodes, fail-safe receiver functionality, hot-plug operation, and extended industrial temperature range. Available in basic and reinforced isolation versions for industrial automation, energy systems, motor drives, and smart infrastructure. Search Keywords: ISO1410, ISO1412, ISO1430, ISO1450, ISO1452, TI ISO14xx, Isolated RS485 Transceiver, Isolated RS422 Transceiver, Galvanic Isolation, Industrial Communication IC, Reinforced Isolation Transceiver, Basic Isolation Transceiver, RS485 Isolator, Differential Bus Transceiver, 256 Node RS485, Fail Safe Receiver, Industrial Automation Communication, PLC Communication, Modbus Interface, Energy Meter Communication, Motor Drive Communication, High EMC RS485, IEC61000 Protected Transceiver Hashtags: #ISO1410 #ISO1412 #ISO1430 #ISO1450 #ISO1452 #TexasInstruments #RS485 #RS422 #IsolatedTransceiver #GalvanicIsolation #IndustrialCommunication #Modbus #PLC #FactoryAutomation #MotorControl #EnergyManagement #SmartGrid #EmbeddedSystems #ElectronicsDesign #PCBDesign

Micro PLC based on RP2040 and programmable via Arduino IDE

Bipolar (BJT) Transistor Array 8 NPN Darlington 50V 500mA Surface Mount 18-SOIC The ULN2803ADW is a high-voltage, high-current Darlington transistor array designed for interfacing low-level digital logic circuits with high-power loads. The device integrates eight NPN Darlington pairs with common-emitter outputs and suppression diodes for inductive load driving. It is commonly used in relay drivers, LED matrix control, solenoid actuation, motor drivers, lamp control, and industrial automation interfaces. The integrated clamp diodes enable direct driving of inductive loads without requiring additional external protection circuitry. The input stage is compatible with standard TTL and CMOS logic levels, making the device suitable for microcontroller, FPGA, and processor-based systems. The ULN2803ADW provides compact multi-channel switching capability in a wide-body SOIC surface-mount package optimized for automated assembly and high-density PCB layouts. Key Features Eight-channel NPN Darlington transistor array High-current sink driver outputs Integrated flyback suppression diodes TTL and CMOS compatible inputs Open-collector outputs Suitable for inductive and resistive loads High output voltage capability Parallel output operation supported for increased current handling Wide operating voltage range Surface-mount SOIC wide-body package Industrial and embedded control application support Electrical Characteristics Darlington transistor output configuration High DC current gain Low input current requirement Common-cathode clamp diode structure Open-collector output topology Logic-level input compatibility High-voltage output tolerance Multi-channel simultaneous switching support Applications Relay and solenoid drivers Stepper motor interfaces LED and lamp driving Industrial automation systems PLC output stages Embedded control systems Printer and actuator control Automotive electronics Logic buffer and level shifting applications Package Information Package Type: SOIC Wide Body Mounting Type: Surface Mount Multi-pin integrated driver package RoHS compliant options available #commonpartslibrary #integratedcircuit #driveric #darlingtonarray #powermanagement #industrialelectronics #embeddedhardware #relaydriver #motorcontrol #automationelectronics

#template #ipc7351b #generic-part-template #componentTemplate

#template #ipc7351b #generic-part-template #componentTemplate

#template #ipc7351b #generic-part-template