Template for Raspberry Pi 5 Model Shield. Include an official pinout so you will always know Raspberry Pi names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Raspberry Pi itself along with the board outline on the silkscreen. #RaspberryPi #Raspberry #RaspberryPi5 #raspberry #Pi #RPi #Shield #template #project #project-template

Turn a PC or Raspberry Pi into a radar lab. Plug-and-play USB-C, protected data lines, dual serial channels, and full access to reset/boot/I2C/UART/SWD for demos, evaluation, and algorithm prototyping.

A self-contained “retro PC” platform built around the ESP32, exposing classic PC-style IO: VGA video, PS/2 keyboard/mouse, audio-out to an onboard speaker, microSD storage, plus USB-C for power and USB-UART for programming/debug.

I don't want to buy an Xbox Controller, so I'm just making one by myself

I'm building an audio amplifier. These are the project requirements: - Type of Amplifier: Class D (for energy efficiency). - Input Source: Line-level input from a standard audio source, e.g., mobile phone or PC. - Output Power: 10W per channel (for a stereo setup). - Number of Channels: 2 (stereo output). - Distortion: Total Harmonic Distortion (THD) of less than 0.1% at full power. - Frequency Response: 20Hz to 20kHz. - Power Supply: Operate from a single 12V DC source. - Protection: Over-current and thermal protection for the amplifier IC. - Connectivity: Standard 3.5mm audio jack for input and screw terminals for speaker outputs. - Volume Control: A physical potentiometer for volume control. - Indicator: An LED indicator that shows power ON status. - Size Constraints: PCB size should not exceed 100mm x 100mm. Consider every requirement individually when answering any question

The Qwiic PC Fan Controller allows you easily control almost any PC fan over the Qwiic bus using the on board ATtiny microcontroller and control firmware. The control firmware monitors the tachometer output of the fan in order to implement PI Control over the fan speed, allowing you to set your desired speed in real units.

This project designs a Linux Single Board Computer using STM32MP157FAC1, featuring DDR memory, a power management IC, USB and SD card interfaces, and essential user controls, aimed at versatile embedded applications.

DUSIA (Dual USB to Serial Isolated Adapter). Used for connecting to PC very sensitive equipment with RS-232 ports

The Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of single board computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior generation Raspberry Pi 3 Model B+ while retaining backward compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems. https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_4b_4p0_reduced.pdf

Objetivo: leer coordenadas X/Y en un panel resistivo casero con Arduino Nano. Componentes: Arduino Nano, 16 MHz, 5 V (1x) MCP23017, expansor I/O I²C de 16 pines (1x) ADS1115, ADC I²C 16 bits (1x) Panel táctil casero, 2 láminas aluminio (1x) Resistencias serie 4.7 kΩ – 10 kΩ (4x) Fuente 5 V (USB/external) Funcionamiento: MCP23017 controla X+/X-/Y+/Y- → aplica 5 V y GND al eje activo. Ejemplo: para leer X → MCP energiza X+/X-, deja Y flotante. ADS1115 mide voltaje en el eje sin energía (ej: Y+/Y-) en modo diferencial. Arduino Nano recibe lecturas por I²C, procesa coordenadas X/Y. Coordenadas enviadas por USB serial al PC. Conexiones: Arduino Nano ↔ I²C bus ↔ MCP23017 y ADS1115 (SDA, SCL en común). MCP23017 pines → X+/X-/Y+/Y- (con resistencias serie). ADS1115 entradas analógicas → eje libre (Y+/Y- o X+/X- según ciclo). Alimentación común: 5 V + GND.

The Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of single board computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior generation Raspberry Pi 3 Model B+ while retaining backward compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems. https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rpi_SCH_4b_4p0_reduced.pdf

A self-contained “retro PC” platform built around the ESP32, exposing classic PC-style IO: VGA video, PS/2 keyboard/mouse, audio-out to an onboard speaker, microSD storage, plus USB-C for power and USB-UART for programming/debug.

Minimal ESP32 and PC817 optocoupler schematic for an isolated WiFi-controlled PC motherboard power-switch interface.

A self-contained “retro PC” platform built around the ESP32, exposing classic PC-style IO: VGA video, PS/2 keyboard/mouse, audio-out to an onboard speaker, microSD storage, plus USB-C for power and USB-UART for programming/debug.

A self-contained “retro PC” platform built around the ESP32, exposing classic PC-style IO: VGA video, PS/2 keyboard/mouse, audio-out to an onboard speaker, microSD storage, plus USB-C for power and USB-UART for programming/debug.

A self-contained “retro PC” platform built around the ESP32, exposing classic PC-style IO: VGA video, PS/2 keyboard/mouse, audio-out to an onboard speaker, microSD storage, plus USB-C for power and USB-UART for programming/debug.

This project is a USB stick PC design utilizing key electronic components such as the STM32MP157FAC1 microprocessor, ESP32-C3-WROOM-02-N4 module, and MT41K256M16TW-107:P DDR3 RAM, enabling portable computing capabilities.

Welcome to your new project. Imagine what you can build here.

This is a template for easy and fast developing HAT for RPI CM4! #RPI #CM4 #Template

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Multi-processor AI development board with STM32MP157-class MPU, RP2350/RP2040 companion MCU, ESP32-S3 WiFi/BT, DDR3L, storage, Ethernet, display/camera/audio, USB-C PD/DC power, and 100 mm x 72 mm 4-layer PCB target.

Welcome to your new project. Imagine what you can build here.

This is a template for easy and fast developing HAT for RPI CM4! #RPI #CM4 #Template

Welcome to your new project. Imagine what you can build here.