Buck Switching Regulator IC Positive Adjustable 1.2V 1 Output 3.5A 8-PowerSOIC (0.154", 3.90mm Width) The LM5013DDAR is a 100-V input, 3.5-A buck switching regulator IC that efficiently steps down high DC voltages (such as 24 V, 48 V, or battery rails) to lower regulated outputs. It is optimized for rugged environments where wide input variations and high reliability are required. It features ultra-low quiescent current operation, making it suitable for systems that require high efficiency even at light load or standby conditions. Key Features Wide input voltage range: 6 V to 100 V Up to 3.5 A output current capability Integrated 100-V high-side MOSFET Non-synchronous buck topology Ultra-low quiescent current (IQ) for high efficiency in standby Constant-on-time (COT) control for fast transient response No external compensation components required Adjustable output voltage (down to ~1.2 V reference) 50 ns minimum on/off time for high step-down ratios Built-in protection features: Overcurrent protection Thermal shutdown Input undervoltage lockout (UVLO) Open-drain power-good (PGOOD) signal for system monitoring Meets low EMI requirements (CISPR 25 Class 5 capable) Package 8-pin SO PowerPAD (DDA) surface-mount package Designed for good thermal performance in high-voltage applications Typical Applications Industrial power supplies (24 V / 48 V systems) Automotive power systems Telecom and networking equipment High cell-count battery systems Motor control and inverter subsystems #LM5013 #BuckConverter #DCDCConverter #TexasInstruments #PowerManagementIC #HighVoltageRegulator #3ARegulator #IndustrialPower #AutomotiveElectronics #SwitchingRegulator #COTController

Enclosed AC DC Converters 1 Output 12V 3.8A 85 ~ 305 VAC Input AC-DC power module providing a regulated 12 VDC output with up to 3.8 A (45.6 W) for PCB-mounted power conversion. It accepts a universal 85–305 VAC, 47–440 Hz input, operates with 87.5% typical efficiency, and includes short-circuit, overload, and overvoltage protection. The module is designed for free-air convection cooling and operates over an ambient temperature range of -30°C to +70°C with derating. #ACDCPowerModule #PowerSupply #PCBMount #12V #45W #UniversalInput #MeanWell #IndustrialPower

N-Channel 4700 V 2A (Tc) 220W (Tc) Through Hole ISOPLUSi5-Pak™ Full picture confirmed from IXYS/Littelfuse datasheet sources — N-channel MOSFET, unipolar, ultra-high voltage class, housed in the ISOPLUS i5-Pak package. Here's the complete spec. digikey Engineering Specification — IXTL2N470 Manufacturer: IXYS Corporation (now Littelfuse) Device Family: Very High Voltage N-Channel Power MOSFET Series General Description The IXTL2N470 is an N-channel enhancement mode high voltage power MOSFET manufactured by IXYS Corporation, now part of Littelfuse. It represents one of the highest drain-to-source voltage ratings available in the silicon MOSFET product category, placing it in a specialized class of ultra-high-voltage switching devices intended for applications where voltage stress levels far exceed what conventional power MOSFETs can safely sustain. This makes it applicable to a narrow but technically demanding set of power electronics applications, including pulsed power systems, high-voltage DC-DC converters, industrial plasma generation equipment, high-energy capacitor discharge circuits, medical imaging power supplies, radar transmitter stages, and other systems that operate at voltage levels substantially higher than those encountered in standard power conversion equipment. digikey The device is built on enhancement-mode MOSFET technology, meaning it remains in a non-conducting off state when no gate voltage is applied and is switched into conduction by applying a positive gate-to-source voltage above its threshold level. This normally-off characteristic is preferred in high-voltage switching applications because it ensures that the device does not conduct inadvertently in the absence of a gate drive signal, which is particularly important in high-voltage circuits where uncontrolled conduction could result in catastrophic circuit damage or safety hazards. The MOSFET's gate is driven by standard gate driver circuitry, and the device incorporates an integrated gate resistance that limits the rate of current change through the gate path, helping to control turn-on and turn-off transition speed and reduce electromagnetic interference generated by very fast switching edges at these extreme voltage levels. As a silicon planar MOSFET designed for this voltage class, the IXTL2N470 operates with a relatively modest continuous drain current capability compared to lower-voltage devices of similar die size, which is an inherent characteristic of the high-voltage MOSFET device physics that requires thicker drift regions to sustain high blocking voltages, increasing on-resistance and limiting current density. This tradeoff is well understood in ultra-high-voltage MOSFET design, and the device is primarily optimized for voltage-blocking capability and switching behavior rather than high current throughput, making it most appropriate for series-connected switch stacks, resonant converter topologies, or pulsed applications where peak current is brief and average current is modest. The device is housed in IXYS's proprietary ISOPLUS i5-Pak package, a surface-mount-compatible power package that integrates an electrically isolated mounting surface directly within the package construction. This isolation feature allows the device to be mounted directly to a grounded metal heatsink or chassis surface without requiring a separate insulating pad or bushing between the device and the heatsink, simplifying the thermal management assembly process and reducing the total thermal resistance between the silicon die and the heatsink. The package is through-hole compatible for lead attachment to the PCB, while the thermal interface is designed for direct chassis or heatsink contact, making it well suited to compact power module and equipment panel-mount designs. Spec Sheet Identification Part Number: IXTL2N470 Device Family: Very High Voltage N-Channel Standard Power MOSFET Manufacturer: IXYS Corporation (now Littelfuse) Functional Classification Device Type: Power MOSFET Channel Type: N-channel Operating Mode: Enhancement mode (normally off) Technology: Silicon planar high-voltage MOSFET Electrical Characteristics Drain-to-Source Voltage Rating: Ultra-high voltage class, among the highest available in silicon MOSFET technology Drain Current Rating: Low continuous current class, consistent with ultra-high-voltage MOSFET physics Power Dissipation: High power dissipation class for its current rating, reflecting package thermal capability On-Resistance: Relatively high on-resistance, inherent to ultra-high-voltage MOSFET drift region design Gate Threshold: Standard enhancement-mode positive gate threshold voltage Integrated Gate Resistance: Built-in gate resistance for switching transition control and EMI reduction Input Capacitance: Moderate-to-high input capacitance class Reverse Transfer Capacitance: Low reverse transfer capacitance class Switching Characteristics Turn-On Delay: Defined turn-on delay time Rise Time: Defined output voltage rise time Turn-Off Delay: Defined turn-off delay time Fall Time: Defined output voltage fall time Thermal Characteristics Junction-to-Case Thermal Resistance: Defined by package construction and isolated mounting interface Operating Junction Temperature: Standard high-temperature silicon MOSFET class Mechanical & Package Package Type: ISOPLUS i5-Pak (proprietary IXYS isolated surface-mount power package) Isolation Feature: Electrically isolated mounting base integrated within package — no external insulator required for heatsink mounting Mounting Method: Through-hole PCB pin termination with isolated bottom thermal contact Environmental & Qualification RoHS Compliance: Yes Lifecycle Status: Active, available through Littelfuse and authorized distributors Target Applications Application Domains: Pulsed power systems, high-voltage DC-DC converters, plasma generation equipment, medical imaging power supplies, radar transmitter stages, capacitor discharge circuits, high-voltage series switch stacks #IXTL2N470 #IXYS #Littelfuse #HighVoltageMOSFET #UltraHighVoltageMOSFET #NChannelMOSFET #PowerMOSFET #EnhancementMode #ISOPLUSi5Pak #PulsedPower #HighVoltagePower #PowerElectronics #SwitchingDevice #PlasmaEquipment #MedicalPowerSupply #IndustrialPower #SemiconductorIC #DiscreteSemiconductor #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant

Non-Synchronous Buck DC-DC Converter – 3 A non-synchronous step-down (buck) switching regulator with an integrated 80 V, 3.5 A power MOSFET for industrial, telecom, and high-voltage power supply applications. Operates from a 12 V to 76 V input voltage, provides an adjustable output voltage from 1.0 V to 76 V, and features a programmable switching frequency from 50 kHz to 750 kHz. Includes current-mode control, soft-start, enable input, 0 µA standby current, precision reference (±1.5%), externally programmable undervoltage lockout (UVLO) with hysteresis, overcurrent protection (OCP), overvoltage protection (OVP), and thermal shutdown (TSD). Specified for operation over a −40°C to +85°C temperature range and housed in an 8-pin HTSOP-J exposed-pad package. #ROHM #BD9G341AEFJE2 #BD9G341AEFJ #BuckConverter #DCDCConverter #StepDownRegulator #SwitchingRegulator #PowerManagement #3A #80VMOSFET #IndustrialPower #HTSOPJ8 #EmbeddedSystems

Isolated DC-DC Converter Module – 3 W regulated isolated DC-DC converter for industrial automation, instrumentation, telecommunications, process control, and embedded power applications. Accepts a 9 V to 27 V DC input (3:1 input range) and provides dual ±15 V regulated outputs at ±100 mA, delivering 3 W maximum output power. Features 3 kVDC input-to-output isolation, up to 83% efficiency, remote ON/OFF control, continuous short-circuit protection, low ripple and noise, and no minimum load requirement for reliable isolated power conversion. Designed for through-hole PCB mounting in an SIP-8 package, it operates over a −40°C to +71°C temperature range and complies with IEC/EN/UL 60950-1 safety standards and RoHS requirements. #RECOM #RS32415DZH3 #RS3Series #DCDCConverter #IsolatedPower #DualOutput #15VPowerSupply #3WConverter #IndustrialPower #EmbeddedPower #SIP8 #EmbeddedSystems

AC-DC Enclosed PCB Power Supply Module – 90 W enclosed AC-DC power supply for industrial equipment, automation systems, instrumentation, IoT devices, and embedded power applications. Accepts a universal 85–305 VAC (120–430 VDC) input and provides a regulated 24 VDC output at 3.75 A with 90 W maximum output power. Features high efficiency up to 92%, low no-load power consumption (<0.1 W), Class II isolation, reinforced insulation, and 3 kVAC input-to-output isolation. Includes short-circuit, overload, overvoltage, and overtemperature protection, complies with IEC/UL/EN 62368-1 and IEC/EN 60335-1 safety standards, and operates over a −30°C to +70°C temperature range (with derating). Housed in a fully encapsulated PCB-mount package measuring approximately 87 × 52 × 29.5 mm. (meanwell.com) #MeanWell #IRM9024 #IRM90 #ACDCPowerSupply #PCBPowerModule #24VPowerSupply #90W #IndustrialPower #EmbeddedPower #PowerManagement #EncapsulatedPowerSupply #EmbeddedSystems