U.FL (UMCC), IPEX MHFI Connector Receptacle, Male Pin 50 Ohms Surface Mount Solder #CommonPartsLibrary #Connector #Coaxial #RF #SMD

Bluetooth, WiFi 802.11b/g/n, Bluetooth v4.2 +EDR Transceiver Module 2.4GHz ~ 2.5GHz Antenna Not Included, I-PEX Surface Mount

RF IC Transceiver LoRaWAN 864MHz, 865MHz, 868MHz 2V ~ 3.6V Supply, Without IPEX Connector #CommonPartLibrary #LoRaWAN #RF #Wireless #Module

I-PEX MHF4 Connector Receptacle, Male Pin 50 Ohms Surface Mount Solder The 20449-001E-03 is an ultra-miniature MHF4 RF coaxial receptacle connector from I-PEX designed for high-frequency wireless applications such as Wi-Fi, Bluetooth, LTE, GNSS, and cellular antenna connections in compact electronic devices. It is a surface-mount RF connector optimized for miniature coaxial cable assemblies and high-density PCB layouts. Key Features Ultra-small MHF4 RF coaxial receptacle Supports frequencies up to 9 GHz Characteristic impedance: 50 Ω Surface-mount (SMT) PCB mounting Snap-on mating mechanism Compact footprint for space-constrained designs Gold-plated center contact for improved conductivity and corrosion resistance Uses: MHF4 compatible RF cables and antenna assemblies High-reliability micro RF interconnect Operating temperature: −40°C to +90°C Rated voltage: 60 V Approximate mating cycle rating: 30 cycles Constructed with: Brass contacts LCP (Liquid Crystal Polymer) dielectric material RoHS compliant Typical Applications Wi-Fi modules LTE/5G modules GNSS/GPS antennas Bluetooth devices IoT devices Embedded wireless systems Compact handheld electronics RF communication modules

Bluetooth, WiFi 802.11b/g/n, Bluetooth v4.2 +EDR Transceiver Module 2.4GHz ~ 2.5GHz Antenna Not Included, I-PEX Surface Mount #commonpartslibrary #rf #wireless #bluetooth #transceiver #module

Bluetooth, WiFi 802.11b/g/n, Bluetooth 4.2 Transceiver Module 2.412GHz ~ 2.484GHz Antenna Not Included, I-PEX Surface Mount #Module #RF #Transceiver #bluetooth #Wifi

IPEX MHF1 Connector Receptacle 50Ohm Surface Mount Solder #commonpartslibrary #connector #U.FL #UMCC #Coaxial #RF

30 Position Receptacle Connector 0.020" (0.50mm) Surface Mount, Right Angle Gold 20455-030E-76 is a 30-position CABLINE®-VS micro-coaxial receptacle connector from I-PEX. It is a high-speed, 0.5 mm pitch, right-angle surface-mount connector designed for applications requiring reliable high-bandwidth signal transmission such as USB4, Thunderbolt™, PCIe, eDP, notebook displays, and telecommunications equipment. The connector features a mechanical locking system to ensure secure mating and prevent accidental disconnects. 30-position receptacle connector 0.5 mm pitch, single-row design Surface-mount, right-angle PCB mounting Supports high-speed data transmission up to 20 Gbps/lane Mechanical locking bar for secure connection Shielded construction for improved signal integrity Gold-plated contacts for enhanced reliability Compatible with CABLINE®-VS series plug assemblies Operating temperature range: -40°C to +85°C LCP (Liquid Crystal Polymer) housing with UL94 V-0 flammability rating Designed for USB4, Thunderbolt 4, PCIe, eDP, and other high-speed interfaces #IPEX #CABLINEVS #MicroCoaxConnector #HighSpeedConnector #USB4 #Thunderbolt4 #PCIe #eDP #BoardToCable #SMTConnector #ElectronicsDesign #Telecommunications #ConnectorTechnology #HighSpeedInterconnects

U.FL (UMCC), IPEX MHFI Connector Receptacle, Male Pin 50 Ohms Surface Mount Solder #CommonPartsLibrary #Connector #Coaxial-Connector #RF #RSP-122811

1 Inner needle IPEX Board Edge 1.25mm 6GHz 260℃ 50Ω 2mm SMD RF Connectors / Coaxial Connectors ROHS #Connector #Coaxial #RF #IPEX

Bluetooth, General ISM < 1GHz, WiFi 802.11b/g/n, Bluetooth v5.0, LoRaWAN, LPWAN Transceiver Module 863MHz ~ 928MHz, 2.4GHz Antenna Not Included, I-PEX MHF4 Surface Mount #Module #RF-Transceiver #ESP32-S3

40 Position Receptacle Connector Surface Mount, Right Angle Gold #CommonPartsLibrary #Connector #Header #Female-Socket #I-PEX

WiFi 802.11b/g/n Transceiver Module 2.4GHz ~ 2.5GHz Integrated, Chip + IPEX Surface Mount #WiFi #bluetooth #Zigbee #MCU #IoT #ARM

General ISM < 1GHz LoRa™ Transceiver Module 410MHz ~ 525MHz Antenna Not Included, I-PEX Surface Mount

Transceiver 433MHz IPEX interface -100dBm 1km SPI SMD,20x14mm RF Transceiver Modules and Modems RoHS The E04-400M16S is based on STMicroelectronics' S2-LPQTR chip as the core, it is an ultra-small size chip wireless transceiver RF module independently developed by Ebyte, working in the 433M/470M frequency band, with a maximum transmission power of 16dBm. Since this module is a SPI pure hardware radio frequency transceiver module, it needs to be driven by MCU. Features  Ultra-small size, only 14x20mm;  The communication distance can reach 1km under ideal conditions;  The maximum transmit power is 16dBm;  The receiving current (RX) is as low as 7mA, and the transmitting current (TX) is as low as 10mA@10dBm;  Low power consumption, suitable for battery-powered applications;  Support 433M/470M frequency band;  Support multiple debugging modes of 2(G)FSK, 4(G)FSK, OOK, ASK;  Support 2.5V～3.6V power supply, power supply greater than 3.3V can guarantee the best performance;  Industrial-grade standard design, supporting long-term use at -40～85℃;  IPEX interface and stamp hole are optional, which is convenient for users to develop and integrate. Application  Smart meeting  Wireless alarm system  Smart door lock  Building automation  Industrial acquisition and control  Intelligent lighting system #E04_400M16S #EBYTE #S2LP #RFModule #WirelessTransceiver #433MHz #470MHz #IoT #IndustrialAutomation #SmartHome #LongRangeWireless #SPI #LowPowerRF #EmbeddedSystems #WirelessCommunication

Bluetooth, WiFi 802.11b/g/n, Bluetooth 4.2 Transceiver Module 2.412GHz ~ 2.484GHz Antenna Not Included, I-PEX Surface Mount #Module #RF #Transceiver #bluetooth #Wifi

2.4GHz -98dBm SMD,19.2x18mm RF Transceiver Modules and Modems RoHS The ESP32-WROOM-32UE-N16 is a 2.4 GHz wireless MCU module built around the ESP32 SoC. It combines a dual-core processor, integrated Wi-Fi (802.11 b/g/n) and Bluetooth 4.2 (Classic + BLE), along with rich peripherals. The “UE” variant specifically uses a U.FL / IPEX connector for an external antenna, making it ideal for applications that require better RF performance or flexible antenna placement (e.g., enclosed products or long-range communication). The “N16” indicates 16 MB external flash memory, suitable for large firmware, OTA updates, and data-heavy applications. Processing Dual-core Xtensa LX6 32-bit CPU Clock speed up to 240 MHz Memory 16 MB Flash (N16 variant) ~520 KB SRAM + 448 KB ROM Connectivity Wi-Fi: 802.11 b/g/n (up to 150 Mbps) Bluetooth: v4.2 (BR/EDR + BLE) Frequency: 2.4 GHz band Antenna External antenna via U.FL connector Better range and flexibility vs PCB antenna Interfaces / Peripherals GPIO (≈26 usable pins) UART, SPI, I2C, I2S, SDIO ADC, DAC PWM (LED & motor control) Capacitive touch sensing Security Hardware encryption: AES, SHA, RSA Secure boot & flash encryption support Power Operating voltage: 3.0V – 3.6V (typ. 3.3V) Multiple low-power modes for battery applications Environmental Operating temperature: -40°C to +85°C Physical Surface-mount module (~38 pins / 52 pads depending on reference) Compact and RF-shielded design Typical Applications Smart home devices (IoT) Industrial automation Wireless sensors and data loggers Wearables and consumer electronics Remote monitoring systems #Module #ESP32

1 Inner pin IPEX Board-End 1.25mm 2mm SMD Coaxial Connectors (RF) ROHS RF Connectors / Coaxial Connectors HC-RF-IPEX0303-01 IPEX-SMD_HC-RF-IPEX0303-01 LCSC Part Number: C2894919 JLCPCB Part Class: Extended Part Manufactured by HCTL(华灿天禄)

RF Modules E01-2G4M27SX WIRELM-SMD_E01-2G4M27SX LCSC Part Number: C2971733 JLCPCB Part Class: Extended Part Manufactured by EBYTE(亿佰特) EBYTE E01-2G4M27SX 2.4GHz SMD RF transceiver module based on Nordic nRF24L01P, integrated PA and LNA, up to 500mW transmit power, SPI interface with 0 to 10Mbps data rate, supports 2Mbps/1Mbps/250kbps air data rates, 125 communication channels, 2.3V to 3.6V supply voltage, industrial 16MHz crystal, IPEX antenna connector, enhanced ShockBurst compatible with nRF24L01/nRF24L01P/nRF24 series, compact 18 x 14.5mm module for long-range wireless communication. Search Keywords: E01-2G4M27SX, EBYTE E01-2G4M27SX, E01 2G4M27SX, E01-2G4M27SX RF module, E01-2G4M27SX nRF24L01P, EBYTE 2.4GHz RF module, nRF24L01P PA LNA module, 500mW 2.4GHz RF transceiver module, SPI RF transceiver module, 2.4GHz SMD wireless module, IPEX antenna RF module, long range nRF24L01P module, EBYTE nRF24 module, E01-2G4M27SX datasheet Hashtags: #E012G4M27SX #EBYTEE012G4M27SX #EBYTE #nRF24L01P #nRF24Module #RFTransceiverModule #24GHzRFModule #24GHzWirelessModule #SMDWirelessModule #500mWRFModule #PALNAModule #SPIRFModule #IPEXAntenna #EnhancedShockBurst #NordicnRF24 #LongRangeWirelessModule

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace, I-PEX Surface Mount #Module #RF #Transceiver

WiFi 802.11b/g/n Transceiver Module 2.4GHz Antenna Not Included, I-PEX Surface Mount #Microcontrollers

RF Connectors / Coaxial Connectors IPEX1-TXZ 142 ANT-SMD_3P-L3.0-W2.6 LCSC Part Number: C3151745 JLCPCB Part Class: Extended Part Manufactured by SHOU HAN(首韩)

RF Connectors / Coaxial Connectors IPEX-1 IPEX-SMD_4P-L2.6-W2.6-LS3.0 LCSC Part Number: C2987682 JLCPCB Part Class: Extended Part Manufactured by Ziisor(致哲)

RF Connectors / Coaxial Connectors IPEX-4 IPEX-SMD_4P-L1.8-W1.7-LS2.0 LCSC Part Number: C2987683 JLCPCB Part Class: Extended Part Manufactured by Ziisor(致哲)