Arduino Nano Every is based on the ATMega4809 AVR processor, flexible to the requirements of your design. It can be used in a breadboard when mounting pin headers, or as a SMT directly soldered on a PCB thanks to its castellated pads. #arduino #nano #every

Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, plastic package. ► Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) ► Power consumption scales automatically with bandwidth ► User-selectable resolution ► Fixed 10-bit resolution ► Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges) ► Embedded memory management system with FIFO technology minimizes host processor load ► Single tap/double tap detection ► Activity/inactivity monitoring ► Free-fall detection ► Supply voltage range: 2.0 V to 3.6 V ► I/O voltage range: 1.7 V to VS ► SPI (3- and 4-wire) and I2C digital interfaces ► Flexible interrupt modes mappable to either interrupt pin ► Measurement ranges selectable via serial command ► Bandwidth selectable via serial command ► Wide temperature range (−40°C to +85°C) ► 10,000 g shock survival ► Pb free/RoHS compliant #commonpartslibrary #sensor #transducer #accelerometer

802.15.4, Bluetooth, WiFi Bluetooth v5.0, Zigbee Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C6-WROOM-1-N8 integrates a 32-bit RISC-V single-core processor running up to 160 MHz, along with 8 MB of embedded SPI flash memory. It supports multiple wireless communication protocols, including: Wi-Fi 6 (802.11ax) in the 2.4 GHz band for improved efficiency and lower latency Bluetooth Low Energy (BLE 5) for short-range communication IEEE 802.15.4 for protocols such as Thread and Zigbee The module features a built-in PCB antenna, RF circuitry, crystal oscillator, and passive components, making it a complete solution that simplifies hardware design. It provides a wide range of GPIO pins and peripheral interfaces such as UART, SPI, I2C, PWM, ADC, and more, enabling flexible integration with sensors and external devices. Designed for low power consumption, it includes multiple power-saving modes, making it suitable for battery-powered applications. Typical Applications Smart home and IoT devices Wireless sensors and control systems Industrial automation Smart lighting and energy management Matter-compatible devices (via Thread support)

555 Type, Timer/Oscillator (Single) IC 100kHz 8-PDIP NE555 DIP-8 through hole The NE555P is a classic and widely used precision timer IC manufactured by companies like Texas Instruments and others. It belongs to the popular 555 timer family and is designed for generating accurate time delays, oscillations, and pulse signals. The “P” variant refers to the PDIP (Plastic Dual In-line Package), making it ideal for through-hole mounting, breadboarding, and prototyping. NE555P PDIP-8 timer Internally, the NE555P consists of: Two comparators A flip-flop A discharge transistor A voltage divider network These blocks allow flexible configuration for timing and waveform generation. Key Features Timing & Operation Modes Monostable mode (one-shot pulse generation) Astable mode (continuous oscillator) Bistable mode (flip-flop operation) Electrical Characteristics Supply voltage range: 4.5V to 16V Output can source or sink up to 200 mA Adjustable duty cycle Performance High timing accuracy and stability Timing range from microseconds to hours (depends on external R and C) Temperature-stable operation Package & Usability 8-pin DIP (through-hole) package Easy to use for: Breadboards DIY electronics Educational projects Common Applications LED flashers and blinkers Pulse generation Time delay circuits PWM control (e.g., dimming LEDs, motor speed control) Tone/sound generation #Timer #commonpartslibrary

ARM® Cortex®-M4 series Microcontroller IC 32-Bit Single-Core 168MHz 1MB (1M x 8) FLASH 64-LQFP (10x10) Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces, and camera Includes ST state-of-the-art patented technology • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions • Memories – Up to 1 Mbyte of flash memory – Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) data RAM – 512 bytes of OTP memory – Flexible static memory controller supporting CompactFlash™, SRAM, PSRAM, NOR and NAND memories • LCD parallel interface, 8080/6800 modes • Clock, reset, and supply management – 1.8 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration • Low-power operation – Sleep, Stop, and Standby modes –VBAT supply for RTC, 20×32-bit backup registers + optional 4 KB backup SRAM • 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode • 2×12-bit D/A converters • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support • Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input • Debug mode – Serial wire debug (SWD) & JTAG interfaces – Cortex-M4 Embedded Trace Macrocell™ • Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/Os • Up to 15 communication interfaces – Up to 3 × I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) – Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock – 2 × CAN interfaces (2.0B Active) – SDIO interface • Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII #commonpartslibrary #integratedcircuit #microcontroller

Hot Swap Controller 1 Channel General Purpose 23-LQFN-CLIP (6x5) The TPS16850VMAR is an automotive-grade integrated hot-swap and protection controller designed for robust power-path management in low-voltage DC systems. The device provides comprehensive protection features including overvoltage protection, undervoltage protection, reverse current blocking, inrush current control, overcurrent protection, and short-circuit protection. It is intended for applications requiring controlled power delivery and fault isolation in harsh electrical environments. The device integrates dual back-to-back MOSFET control to support bidirectional current blocking and safe power switching. Adjustable protection thresholds and timing parameters allow flexible system configuration for various power rail requirements. The TPS16850VMAR supports operation across a wide supply voltage range and is optimized for automotive and industrial systems requiring high reliability and transient immunity. The controller includes fault reporting and system status monitoring functions to support intelligent power management architectures. Soft-start capability minimizes inrush current during startup, reducing stress on connectors, power supplies, and downstream circuitry. Integrated thermal protection enhances system safety during abnormal operating conditions. The TPS16850VMAR is qualified for automotive applications and complies with AEC-Q100 requirements. The device is provided in a compact VQFN package suitable for space-constrained designs and high-density PCB layouts. Key Features Automotive-qualified hot-swap and eFuse controller Wide operating input voltage range Adjustable overvoltage and undervoltage protection Reverse current and reverse polarity protection Inrush current control with programmable soft-start Adjustable overcurrent and short-circuit protection Fault monitoring and reporting outputs Integrated thermal shutdown protection Back-to-back MOSFET control architecture Fast fault response and isolation Support for controlled power sequencing Designed for harsh automotive electrical environments AEC-Q100 qualified for automotive applications Compact VQFN surface-mount package Applications Automotive electronic control units Infotainment and telematics systems ADAS and camera modules Industrial power distribution Hot-swappable system power rails Battery-powered embedded systems Power-path management systems Protection for sensitive downstream electronics Electrical Characteristics Operates from low-voltage DC power rails Supports programmable protection thresholds Integrated current sensing and fault detection High transient immunity for automotive environments Low standby current operation Fast response to overload and fault conditions Mechanical Characteristics Surface-mount VQFN package Compact footprint for dense PCB layouts RoHS-compliant package construction Suitable for automated assembly processes Environmental and Reliability Specifications Automotive AEC-Q100 qualified Extended operating temperature range ESD protection on interface pins Designed for high-reliability applications Supports operation in electrically noisy environments #commonpartslibrary #integratedcircuit #powermanagement #hotswapcontrollers

Amplifier IC 2 Channel (Stereo) Class D 32-HTSSOP The TPA3116D2QDADRQ1 is an automotive-grade, high-efficiency Class-D stereo audio power amplifier IC from Texas Instruments. It is designed to drive speakers directly in compact audio systems while maintaining high output power and low heat dissipation. The device is part of the TPA3116-Q1 family, qualified for AEC-Q100 automotive applications, making it suitable for harsh environments such as vehicle infotainment and industrial audio systems. It operates from a single supply and uses advanced Class-D switching architecture to achieve high efficiency (typically >90%), reducing the need for large heat sinks and improving overall system power efficiency. 🔑 Key Features Output power capability Up to 2 × 50 W into 4 Ω (BTL mode at ~21 V) Wide supply voltage range 4.5 V to 26 V single supply operation High efficiency Class-D operation 90% efficiency with low idle power loss Stereo and mono configurations Supports BTL stereo and PBTL mono modes Differential and single-ended inputs Flexible audio input compatibility Advanced protection features Overvoltage protection Undervoltage protection Overtemperature shutdown Short-circuit protection DC detect protection with fault reporting EMI-optimized design Reduced electromagnetic interference for easier system compliance Programmable power limit Helps protect speakers and manage output levels Thermally enhanced 32-pin HTSSOP package Designed for better heat dissipation in compact layouts Typical Applications Automotive infotainment systems Car audio amplifiers Soundbars and home audio systems Portable and powered speakers Industrial audio solutions #commonpartslibrary #integratedcircuit #linearamplifier #audioamplifier

24 Bit Analog to Digital Converter 8 Input 8 Sigma-Delta 32-TQFP (5x5) The ADS131M08IPBSR is a high-precision, simultaneous-sampling analog-to-digital converter designed for multi-channel data acquisition systems requiring accurate and synchronized measurements. Manufactured by Texas Instruments, this device integrates eight differential input channels with low-noise performance, programmable gain amplification, and precision voltage reference support. The converter architecture is optimized for industrial automation, energy monitoring, medical instrumentation, and precision sensing applications where phase alignment and signal fidelity are critical. The device incorporates delta-sigma conversion technology with integrated digital filtering to provide high dynamic range and excellent noise performance across a wide operating bandwidth. It supports flexible data interface configurations through a high-speed SPI-compatible serial interface, enabling efficient communication with microcontrollers, DSPs, and FPGA-based systems. The integrated diagnostic and monitoring features improve system reliability and simplify fault detection in safety-critical applications. The ADS131M08IPBSR operates from low-voltage analog and digital supplies while maintaining low power consumption suitable for embedded and portable systems. The compact thermally enhanced package supports dense PCB layouts and reliable operation across industrial temperature environments. Engineering Specification Device Type: Simultaneous-Sampling Delta-Sigma Analog-to-Digital Converter Manufacturer: Texas Instruments Channel Configuration: Eight Differential Input Channels Resolution: Twenty-Four Bit ADC Architecture: Delta-Sigma Sampling Type: Simultaneous Sampling Input Type: Differential Analog Inputs Programmable Gain Amplifier: Integrated Data Output Interface: SPI-Compatible Serial Interface Reference Support: External Precision Voltage Reference Digital Filtering: Integrated Sinc Filter Architecture Operating Supply Voltage: Low-Voltage Analog and Digital Supplies Noise Performance: Low Noise Precision Measurement Capability Power Consumption: Optimized for Low Power Operation Diagnostics Features: Integrated Self-Monitoring and Fault Detection Temperature Range: Industrial Operating Temperature Range Package Type: TQFP Surface-Mount Package Mounting Type: Surface Mount Technology Application Areas: Energy Metering, Industrial Automation, Medical Instrumentation, Data Acquisition Systems, Multi-Channel Sensor Interfaces #commonpartslibrary #integratedcircuit #analog #digital #converter

Buck-Boost Switching Regulator IC Positive Programmable 0.8V 1 Output 8A 21-PowerVFQFN Synchronous buck-boost DC-DC converter IC that regulates output voltage from a wide input supply range for power management applications. The TPS552892RYQR integrates a four-switch synchronous buck-boost power stage and operates with a 2.7 V to 36 V input voltage range, providing a regulated output voltage across a wide conversion range. It supports programmable output voltage settings and adjustable switching frequency operation, enabling flexible power design optimization. The device includes I²C interface control for configuration and telemetry monitoring. It is designed for high-efficiency step-up and step-down conversion in compact power systems. Key specifications (per datasheet): Input voltage range: 2.7 V to 36 V Topology: Synchronous 4-switch buck-boost converter Control/interface: I²C configurable operation Adjustable switching frequency (as specified in datasheet) #DC-DCConverter #BuckBoost #PowerManagement #TexasInstruments #SynchronousConverter #IC

4.5V to 26V, 38-W Stereo, Digital Input, Class-D Audio Amp with 96-kHz/192-kHz flexible Processing, Amplifier IC 2-Channel (Stereo) Class D 32-VQFN (5x5) #CommonPartsLibrary #IntegratedCircuit #Amplifier #Audio-Amplifier #TAS5825

MAX98357A Series 5.5V 3.2W PCM Input Class D Audio Power Amplifier - TQFN-16 The MAX98357A/MAX98357B is an easy-to-use, low-cost, digital pulse-code modulation (PCM) input Class D amplifier that provides industry-leading Class AB audio performance with Class D efficiency. The digital audio interface automatically recognizes up to 35 different PCM and TDM clocking schemes which eliminates the need for I2C programming. Operation is further simplified by eliminating the need for an external MCLK signal that is typically used for PCM communication. Simply supply power, LRCLK, BCLK, and digital audio to generate audio! Furthermore, a novel pinout allows customers to use the cost-effective WLP package with no need for expensive vias (refer to Application Note 6643: Optimize Cost, Size, and Performance with MAX98357 WLP for more information). The digital audio interface is highly flexible with the MAX98357A supporting I2S data and the MAX98357B supporting left-justified data. Both ICs support 8 channel time division multiplexed (TDM) data. The digital audio interface accepts specified sample rates between 8kHz and 96kHz for all supported data formats. The ICs can be configured to produce a left channel, right channel, or (left/2 + right/2) output from the stereo input data. The ICs operate using 16/24/32-bit data for I2S and left-justified modes as well as 16-bit or 32-bit data using TDM mode. The ICs eliminate the need for the external MCLK signal that is typically used for PCM communication. This reduces EMI and possible board coupling issues in addition to reducing the size and pin count of the ICs. The ICs also feature a very high wideband jitter tolerance (12ns typ) on BCLK and LRCLK to provide robust operation. Active emissions-limiting, edge-rate limiting, and overshoot control circuitry greatly reduce EMI. A filterless spread-spectrum modulation scheme eliminates the need for output filtering found in traditional Class D devices and reduces the component count of the solution. The ICs are available in 9-pin WLP (1.345mm x 1.435mm x 0.64mm) and 16-pin TQFN (3mm x 3mm x 0.75mm) packages and are specified over the -40°C to +85°C temperature range. ● Single-Supply Operation (2.5V to 5.5V) ● 3.2W Output Power into 4Ω at 5V ● 2.4mA Quiescent Current ● 92% Efficiency (RL = 8Ω, POUT = 1W) ● 22.8μVRMS Output Noise (AV = 15dB) ● Low 0.013% THD+N at 1kHz ● No MCLK Required ● Sample Rates of 8kHz to 96kHz ● Supports Left, Right, or (Left/2 + Right/2) Output ● Sophisticated Edge Rate Control Enables Filterless Class D Outputs ● 77dB PSRR at 1kHz ● Low RF Susceptibility Rejects TDMA Noise from GSM Radios ● Extensive Click-and-Pop Reduction Circuitry ● Robust Short-Circuit and Thermal Protection ● Available in Space-Saving Packages: 1.345mm x 1.435mm WLP (0.4mm Pitch) and 3mm x 3mm TQFN ● Solution Size with Single Bypass Capacitor is 4.32mm2 Applications ● Single Li-ion Cell/5V Devices ● Smart Speakers ● Notebook Computers ● IoT Devices ● Gaming Devices (Audio and Haptics) ● Smartphones ● Tablets ● Cameras #commonpartslibrary #integratedcircuit #linearamplifier #mono

Seeed Studio XIAO ESP32C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivity. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios. #SeeedStudio #xiao

Pressure Sensor 4.35PSI ~ 18.13PSI (30kPa ~ 125kPa) Absolute 10-WFLGA The BMP581 is a high-precision digital barometric pressure sensor designed for altitude tracking, environmental monitoring, navigation, weather sensing, and industrial measurement applications. It integrates a MEMS pressure sensing element with a low-noise analog front end and digital signal processing to deliver highly accurate pressure and temperature measurements over a wide operating range. The device supports low-power operation, making it suitable for portable, battery-powered, and always-on sensing systems. The sensor communicates through standard digital interfaces and includes configurable sampling, filtering, and interrupt features for flexible system integration. Its compact package enables use in space-constrained embedded designs such as wearables, mobile devices, drones, smart home systems, IoT devices, and industrial instrumentation. Engineering Specification Device Type Digital barometric pressure and temperature sensor Manufacturer Bosch Sensortec Pressure Measurement High-resolution absolute pressure measurement with integrated temperature compensation Temperature Measurement Integrated digital temperature sensing for environmental monitoring and pressure compensation Pressure Range Wide atmospheric pressure sensing range suitable for altitude and environmental applications Interface Support I²C and SPI digital communication interfaces Supply Voltage Low-voltage operation optimized for embedded and portable systems Power Consumption Ultra-low power modes with configurable performance and sampling settings Measurement Features Oversampling support with programmable output data rate and internal filtering Accuracy High absolute and relative pressure accuracy for precise altitude estimation and environmental sensing Noise Performance Low-noise sensor architecture for stable pressure readings and improved altitude resolution Interrupt Features Configurable interrupt generation for data-ready and threshold-based events FIFO Support Integrated FIFO buffering for efficient sensor data management Operating Temperature Industrial temperature operating capability for consumer and industrial environments Package Type Compact surface-mount package optimized for small PCB footprint designs Applications Altitude tracking, indoor navigation, weather stations, drones, wearable electronics, IoT sensing, HVAC systems, industrial monitoring, and portable devices #CommonPartsLibrary #Sensor #Transducer #PressureSensor

ARM® Cortex®-M33 STM32H5 Microcontroller IC 32-Bit 250MHz 2MB (2M x 8) FLASH 144-LQFP (20x20) # STM32H573ZIT6 ## General Description The STM32H573ZIT6 is a high-performance microcontroller from STMicroelectronics based on the Arm Cortex-M33 core. It is designed to deliver advanced processing capability, enhanced security, and extensive peripheral integration for industrial, medical, consumer, communications, and embedded control applications. The device combines powerful computational performance with low-power operation, making it suitable for real-time control, edge computing, human-machine interfaces, industrial automation, IoT gateways, motor control systems, and secure connected devices. Integrated security features, high-speed memory architecture, and comprehensive communication interfaces enable the development of robust and scalable embedded solutions. ## Key Features ### Processing Architecture * Arm Cortex-M33 processor core * TrustZone security architecture * Digital signal processing capabilities * Floating-point computation support * Optimized real-time processing performance ### Memory Resources * Embedded Flash memory * Integrated SRAM architecture * Error correction capability for enhanced reliability * High-speed memory access structure ### Security Features * Secure boot functionality * Hardware cryptographic accelerators * Secure firmware update support * Memory protection mechanisms * Tamper detection capabilities * Trusted execution environment * Secure key management support ### Communication Interfaces * USART and UART communication interfaces * SPI serial communication interfaces * I²C communication interfaces * CAN FD connectivity * USB connectivity support * Ethernet interface capability * SDMMC memory card interface * Flexible external communication options ### Analog Features * High-performance analog-to-digital conversion * Digital-to-analog conversion capability * Analog comparators * Precision signal acquisition support ### Timer and Control Functions * Advanced control timers * General-purpose timers * PWM generation capability * Encoder interface support * Motor-control functionality * Real-time clock integration ### Power Characteristics * Low-power operating modes * Dynamic power optimization * Battery-powered application support * Efficient performance-to-power ratio ### Package Characteristics * LQFP package construction * Surface-mount technology compatibility * Industrial-grade mechanical design * Suitable for automated assembly processes ### Application Areas * Industrial Automation Systems * Motor Control Equipment * Human-Machine Interfaces * Smart Energy Systems * Medical Electronics * IoT Gateways * Secure Embedded Devices * Industrial Networking Equipment * Building Automation Systems * Consumer Electronics * Data Acquisition Systems * Edge Computing Applications ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial and Commercial Application Support ## Manufacturer STMicroelectronics ## Product Family STM32H5 Series High-Performance Microcontrollers #STM32H573ZIT6 #STM32H5 #STMicroelectronics #CortexM33 #Microcontroller #EmbeddedSystems #IndustrialAutomation #SecureMCU #IoT #EdgeComputing #MotorControl #EmbeddedDesign #ElectronicsEngineering #FirmwareDevelopment #IndustrialElectronics

MCP3913 Series 3.6 V 4.5 mA SMT Six-Channel Analog Front End - SSOP-28 The MCP3913A1T-E/SS is a high-performance, multi-channel analog front-end (AFE) from Microchip Technology intended for precision measurement applications. It features six simultaneous sampling 24-bit delta-sigma ADCs with integrated programmable gain amplifiers, enabling accurate acquisition of low-level analog signals. Designed for energy monitoring and industrial sensing, the device provides low noise, high dynamic range, and flexible configuration. It supports SPI communication for efficient interfacing with microcontrollers and digital processing systems. Key Features Six simultaneous sampling 24-bit delta-sigma ADC channels Integrated programmable gain amplifiers per channel High signal-to-noise ratio and low distortion Programmable oversampling ratios for performance tuning Internal voltage reference with external reference option SPI-compatible digital interface Configurable data output formats and control registers Low power operation modes Electrical Characteristics Resolution: 24-bit Number of Channels: 6 Input Configuration: Differential Supply Voltage: 2.7V to 3.6V Operating Temperature Range: -40°C to +125°C Programmable Gain: Up to 32 V/V (typical) Reference Voltage: Internal or external selectable Functional Description The device integrates six high-resolution delta-sigma ADCs that sample input signals simultaneously, ensuring accurate phase and timing relationships across channels. Each input passes through a programmable gain stage, allowing optimization for different sensor levels. Analog signals are digitized using oversampling and digital filtering techniques to achieve high precision and noise reduction. Configuration is handled via internal registers, and data is transferred through an SPI interface. Package Information Package Type: SSOP Pin Count: 28 Mounting Type: Surface Mount Applications Energy metering Power monitoring systems Industrial automation Multi-channel data acquisition Sensor interfacing Smart grid systems Advantages High integration reduces external components Simultaneous sampling improves measurement accuracy High resolution supports precise signal analysis Flexible configuration for various system requirements #commonpartslibrary #integratedcircuit #powermanagement #energymetering

Audio D/A Converter ICs SABRE 8 Channel Smart DAC with Line Drivers, ASP2, 7mmx7mm, 48-QFN The ES9082Q is a high-performance stereo digital-to-analog converter (DAC) developed by ESS Technology for premium audio applications requiring exceptional sound quality, low power consumption, and compact integration. It utilizes the patented HyperStream® architecture and Time Domain Jitter Eliminator technology to deliver highly accurate audio reproduction with ultra-low distortion and noise characteristics. The device supports high-resolution PCM and DSD audio formats, making it suitable for portable audio devices, USB DACs, digital media players, automotive infotainment systems, wireless audio products, and professional audio equipment. The ES9082Q integrates advanced digital filtering, low-jitter clock management, and flexible audio interface support while maintaining efficient power operation for battery-powered applications. Designed for compact embedded audio systems, the ES9082Q provides excellent dynamic range and signal fidelity while minimizing external component requirements. Its architecture enables high-quality playback performance across a wide range of consumer and industrial audio applications. Electrical Characteristics Supply voltage supports low-voltage digital and analog power domains optimized for portable and embedded applications. The device operates with low power consumption while maintaining high audio performance. Integrated power management supports efficient system-level implementation. Audio Performance The converter supports high-resolution stereo audio output with advanced oversampling and noise shaping technology. It delivers ultra-low total harmonic distortion plus noise performance and high dynamic range suitable for high-fidelity audio playback systems. PCM audio data rates support standard and high-resolution formats up to 32-bit depth with sampling frequencies extending to high-definition audio ranges. Native DSD playback capability is also supported for audiophile-grade applications. Digital Audio Interface The ES9082Q supports industry-standard serial audio interfaces including I²S, left-justified, and related digital audio communication protocols. Flexible master and slave clocking configurations enable compatibility with a wide variety of host processors and audio controllers. Integrated jitter suppression circuitry improves clock stability and minimizes timing-induced audio artifacts. Integrated Features The device incorporates digital interpolation filters, volume control functions, soft mute capability, and programmable audio processing features. Internal PLL and clock management circuitry reduce external timing component requirements. Built-in low-noise analog output stages simplify audio signal chain design and reduce overall PCB footprint. Package Information The ES9082Q is provided in a compact surface-mount package optimized for space-constrained audio products. The package supports automated assembly and high-density PCB layouts commonly used in portable and embedded systems. Typical Applications Applications include portable audio players, USB DAC modules, wireless speakers, automotive audio systems, headphones, digital amplifiers, embedded multimedia devices, smart home audio equipment, and professional audio playback systems. #commonpartslibrary #integratedcircuit #audioic #dac #stereodac #esstechnology #es9082q #highresolutionaudio #audiophile #digitalaudio #analogaudio #i2s #dsd #pcm #embeddedaudio #consumerelectronics #portableaudio #usbdac #hifi #signalprocessing #lownoise #lowdistortion #electronicsdesign #pcbdesign #hardwareengineering #electroniccomponents #semiconductor #mixedsignal #audioelectronics #soundquality