Current Monitor Regulator 5% 15A 24-VQFN (4x4) #commonpartslibrary #integratedcircuit #powermanagement #currentmonitor

Current Monitor Regulator High/Low-Side 10mA 10-VSSOP #commonpartslibrary #integratedcircuit #powermanagement #currentmonitor

Current Monitor Regulator High-Side 10mA 8-SOIC #commonpartslibrary #integratedcircuit #powermanagement #currentmonitor

Current Monitor Regulator High-Side 10mA SOT-23-8 Current/Power Monitor IC – High-side current shunt and power monitor with an integrated 12-bit ADC, supporting bus voltages from 0V to 26V and measuring shunt voltages across a programmable range of ±320mV. It provides an I²C interface with programmable addresses and operates from a 3V to 5.5V supply in a small SOT-23 package. #CurrentMonitor #PowerMonitor #ShuntMeasurement #I2C #ADC #TexasInstruments

Electronic Fuse Regulator 5.3A 20-WQFN (3x4) The TPS25940 is a compact, feature-rich eFuse (electronic fuse) power switch from Texas Instruments designed to provide advanced power-path protection and management for SSDs, storage systems, servers, telecom equipment, and other DC-powered applications. It integrates back-to-back MOSFETs for true reverse-current blocking, programmable current limiting, overvoltage/undervoltage protection, and controlled output slew-rate management in a small 20-pin WQFN package. Key Features Wide operating voltage range: 2.7 V to 18 V (20 V maximum input) Low 42 mΩ typical on-resistance (RDS(on)) Adjustable current limit from 0.6 A to 5.3 A True reverse-current blocking using integrated back-to-back FETs Fast reverse-voltage shutdown response of 1 µs Programmable output ramp-up (dV/dt control) for inrush-current management Programmable overvoltage (OVP) and undervoltage (UVP) protection thresholds Integrated IMON analog current-monitor output PGOOD and FLT status outputs for system monitoring Low-power DevSleep™ mode for SATA SSD applications Typical operating quiescent current of 200 µA Typical disabled current of 15 µA Operating junction temperature range from −40°C to +125°C UL 2367 recognized and designed for fault-safe operation under single-point failure conditions. Typical Applications PCIe, SATA, and SAS SSD/HDD storage devices Enterprise servers and storage systems RAID controller cards with holdup-power management Telecom switches and routers Set-top boxes, DTVs, and gaming consoles Adapter-powered equipment General-purpose smart load-switch and power-protection circuits. Package Information Package: 20-pin WQFN (RVC) Temperature range: −40°C to +85°C ambient operation Tape-and-reel packaging for automated assembly. #CommonPartsLibrary #IntegratedCircuit # TPS25940

Integrated Automotive eFuse with Hot-Swap Controller – Automotive-grade integrated electronic fuse (eFuse) and hot-swap controller for power distribution, automotive ECUs, ADAS, industrial automation, servers, SSDs, and embedded power management. Operates from a 2.7 V to 26 V input supply (30 V absolute maximum) and integrates a 2.7 mΩ MOSFET capable of supporting up to 20 A load current with an adjustable current limit from 2 A to 20 A. Features 1.5% accurate load current monitoring, programmable inrush current control, adjustable overvoltage protection (OVP), undervoltage protection (UVP), reverse current blocking with external blocking FET drive, thermal shutdown, short-circuit protection, fault timer, auto-retry or latch-off fault response, and power-good/fault reporting for robust system protection. Specified for operation over a −40°C to +125°C temperature range and housed in a compact 24-pin VQFN (4 × 4 mm) package. #TexasInstruments #TPS259830ONRGER #TPS25983 #eFuse #HotSwapController #PowerManagement #CurrentMonitoring #InrushControl #CircuitProtection #AutomotiveElectronics #VQFN24 #EmbeddedSystems

TPS259621DDAR ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP LCSC Part Number: C2155774 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments TPS2596 eFuse integrated FET hot-swap protection IC, 2.7V to 19V input voltage range, 21V absolute maximum input rating, 0.125A to 2A adjustable current limit, 89mΩ typical on-resistance, accurate current monitor output, active-high enable with adjustable UVLO, fast overvoltage clamp or adjustable OVLO options, adjustable output slew-rate control, overtemperature protection, fault indication pin, IEC 61000-4-4 EFT immunity, -40°C to +125°C junction temperature range, SOIC-8 package. Search Keywords: TPS2596, Texas Instruments TPS2596, TI TPS2596, TPS2596 eFuse, TPS2596 hot swap controller, TPS2596 power protection IC, TPS2596 current limit switch, TPS259620DDA, TPS259621DDA, TPS259630DDA, TPS259631DDA, 2A eFuse, 19V eFuse, 89mOhm eFuse, adjustable current limit eFuse, overvoltage protection eFuse, current monitor eFuse, SOIC-8 eFuse, TPS2596 datasheet Hashtags: #TPS2596 #TexasInstrumentsTPS2596 #TIEFuse #eFuse #HotSwapProtection #PowerProtectionIC #CurrentLimitSwitch #IntegratedFETSwitch #2AeFuse #19VeFuse #89mOhmSwitch #OvervoltageProtection #UVLOProtection #CurrentMonitorIC #FaultIndicator #SOIC8 #TPS259620DDA #TPS259621DDA #TPS259630DDA #TPS259631DDA

Current Sensor 100A 1 Channel Hall Effect, Open Loop Bidirectional 5-CB Formed Leads, PFF The ACS758LCB-100B-PFF-T is a fully integrated Hall-effect current sensor IC from Allegro MicroSystems, designed for accurate and electrically isolated measurement of both AC and DC currents up to ±100 A. It incorporates a precision Hall sensing element positioned near a low-resistance copper current conductor, producing an analog output voltage proportional to the sensed current. The device offers galvanic isolation between the current path and signal pins, making it ideal for high-voltage and high-current applications such as motor drives, power supplies, inverters, battery management systems, and overcurrent protection circuits. Key Features Hall-effect based current sensing for AC and DC currents up to ±100 A Galvanic isolation between current conductor and signal circuitry 120 kHz typical bandwidth for fast current measurement 3 µs typical response time to step current changes 20 mV/A typical sensitivity Ultra-low 100 µΩ internal conductor resistance for minimal power loss Factory-trimmed gain and offset for improved accuracy Typical total output error of 2.4% over temperature Integrated electrostatic shield for improved immunity to high dV/dt and electrical noise Single-supply operation from 3.0 V to 5.5 V High reliability monolithic Hall IC architecture AEC-Q100 qualified for automotive applications Operating temperature range of -40°C to +150°C #ACS758LCB100BPFFT #ACS758 #CurrentSensor #HallEffectSensor #CurrentMonitoring #PowerElectronics #MotorControl #OvercurrentProtection #BatteryManagement #AutomotiveElectronics #AllegroMicroSystems #HighCurrentSensing #DCCurrentSensor #ACCurrentSensor #IndustrialAutomation #commonpartslibrary #currentsensor