6-Pin AVR ISP Connector for Programmer. Surface mount, pitch 2.54mm(0.100") NO 3D body

This part is Not Recommended for New Design(NRND) USB Type C, 3 A, Right Angle, Surface Mount (SMT), Power-Only USB Receptacle -40℃~+85℃ 1 20V 3,000 Cycles 5A 6.8mm 6P Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHS

6-Pin AVR ISP Connector for Programmer with pinout text on footprint. Connector Header Through Hole 6 position 0.100" (2.54mm), Shrouded - 4 Wall

6-Pin AVR ISP Connector for Programmer. Connector Header Through Hole 6 position 0.100" (2.54mm), Shrouded - 4 Wall

6-Pin AVR PDI (Program and Debug Interface) Connector for Programmer. Connector Header Through Hole 6 position 0.100" (2.54mm), Shrouded - 4 Wall

6-Pin AVR Unified Program and Debug Interface (UPDI) Connector for Programmer. Connector Header Through Hole 6 position 0.100" (2.54mm), Shrouded - 4 Wall

Bipolar (BJT) Transistor Array 2 PNP (Dual) Matched Pair 65V 100mA 175MHz 380mW Surface Mount 6-TSOP The BCM856DS,115 is a dual matched PNP bipolar junction transistor (BJT) housed in a compact SOT-363 (SC-88) 6-pin surface-mount package. It consists of two independent PNP transistors with closely matched electrical characteristics, making it suitable for differential amplifier stages, current mirrors, and signal processing applications where symmetry and thermal tracking are important. Key Features Dual PNP transistor configuration in a single package Matched transistor pair for improved circuit stability Low collector-emitter saturation voltage High current gain consistency between channels Compact SOT-363 (SC-88) package for space-constrained designs Suitable for low-power and signal-level applications Electrical Characteristics (typical values unless otherwise noted) Collector-Emitter Voltage (VCEO): -45 V Collector-Base Voltage (VCBO): -50 V Emitter-Base Voltage (VEBO): -5 V Continuous Collector Current (IC): -100 mA per transistor Power Dissipation (Ptot): ~250 mW total DC Current Gain (hFE): 100 to 300 Transition Frequency (fT): ~100 MHz Package Information Package Type: SOT-363 (SC-88) Mounting: Surface Mount Pin Count: 6 Configuration: Dual PNP (E1, B1, C2, E2, B2, C1 pin arrangement depending on layout) Applications Differential amplifier input stages Current mirror circuits Signal amplification Analog front-end designs Matched pair transistor applications Additional Notes The two transistors are thermally coupled within the same package, improving matching over temperature variations Ideal for precision analog circuits requiring closely matched transistor characteristics Commonly used in compact and high-density PCB layouts #commonpartslibrary #transistor #bjt #pnp

Ultra-Low Capacitance Quad-Channel ESD Protection Array – Four-channel rail-to-rail transient voltage suppressor (TVS) / ESD protection array designed to protect high-speed data and communication interfaces including USB 2.0, HDMI, DVI, Ethernet, mobile devices, and embedded systems from electrostatic discharge (ESD) and transient overvoltage events. Features ultra-low 1 pF input/output capacitance to preserve signal integrity on high-speed lines, 6 V minimum breakdown voltage, and IEC 61000-4-2 Level 4 ESD protection (±8 kV contact discharge) with very low clamping voltage through an integrated rail-to-rail steering diode architecture. Includes four unidirectional protection channels, low reverse leakage current, and AEC-Q101 qualification for automotive applications. Specified for operation over a −55°C to +150°C ambient temperature range and housed in a compact 6-pin TSOP (SOT-457 / SC-74) surface-mount package. #Nexperia #PRTR5V0U4D125 #PRTR5V0U4D #TVSDiode #ESDProtection #TransientProtection #USBProtection #HDMIProtection #DVISProtection #HighSpeedInterface #AutomotiveElectronics #EmbeddedSystems

6-Pin \"No Legs\" Cable with 10-pin micro-connector for Cortex processors Cable assembly, designed for ARM Cortex® SWD debugging and programming, featuring a 6-pin Tag-Connect™ Plug-of-Nails™ connector that mates with the TC2030 target footprint and a 10-pin FTSH-105 compatible ribbon connector. The cable supports SWD signals including VCC, SWDIO/TMS, SWCLK/TCK, SWO/TDO, nRESET, and GND for direct connection between compatible debuggers and target PCBs. #CableAssembly #DebugCable #ARMCortex #SWD #TagConnect #TC2030 #ProgrammingCable

High-Speed Automotive Comparator – Single rail-to-rail high-speed comparator with push-pull output, adjustable hysteresis, and latch function for fast signal detection applications. Operates from a 2.4 V to 5.5 V supply, features 2.5 ns typical propagation delay, 325 MHz toggle frequency, ±5 mV maximum input offset voltage, and an input common-mode range extending 200 mV beyond both supply rails. Includes power-on reset (POR) functionality and is specified for an operating temperature range of −40°C to +125°C. Housed in a 6-pin SC70 (DCK) package. #TexasInstruments #TLV3603QDCKRQ1 #TLV3603Q1 #Comparator #HighSpeedComparator #RailToRail #PushPullOutput #AdjustableHysteresis #Latch #325MHz #2_5ns #SC70 #Automotive #EmbeddedSystems

Automotive High-Side Load Switch IC – Single-channel high-side load switch optimized for automotive power distribution, ADAS, infotainment, body electronics, industrial control, and embedded power management. Operates from a 1.5 V to 5.5 V control supply and switches 0.8 V to 5.5 V load voltages, delivering up to 3 A continuous output current with an ultra-low 19 mΩ (typical) ON resistance for minimal power loss. Features controlled slew-rate switching to reduce inrush current, integrated quick output discharge (QOD), fixed current limiting, thermal shutdown, reverse current blocking (when disabled), and low quiescent current for efficient operation. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C ambient temperature range and is housed in a compact 6-pin SOT-23 Thin (TSOT-23-6) package. #TexasInstruments #TPS22995HQDDCRQ1 #TPS22995 #LoadSwitch #HighSideSwitch #PowerDistribution #PowerManagement #CurrentLimiting #AutomotiveElectronics #AECQ100 #SOT236 #EmbeddedSystems

Digital Temperature Sensor – 16-bit digital temperature sensor with I²C/SMBus 3.0 interface for local temperature measurement from −40°C to +125°C. Operates from a 1.5 V to 3.6 V supply and provides ±0.5°C accuracy over the −10°C to +60°C range. Features programmable temperature thresholds, ALERT output, one-shot mode, support for up to 1 MHz I²C clock, and up to four selectable I²C addresses. Housed in a 6-pin UDFN (2 × 2 mm) package. #STMicroelectronics #STTS22H #STTS22HTR #TemperatureSensor #DigitalTemperatureSensor #I2C #SMBus #16Bit #TemperatureMonitoring #UDFN6 #EmbeddedSystems #Sensors

Dual Non-Inverting Open-Drain Buffer IC – Dual non-inverting buffer with open-drain outputs for logic level translation, bus interfacing, signal buffering, wired-AND logic, and embedded digital systems. Operates from a 1.65 V to 5.5 V supply and features two independent 1-bit buffer channels capable of sinking up to 32 mA per output. The open-drain outputs allow direct interfacing with multiple voltage domains using external pull-up resistors, making the device suitable for I²C buses, interrupt lines, LED driving, and mixed-voltage logic applications. Features high-speed CMOS operation, low static power consumption, 5.5 V input tolerance, and is specified for operation over a −40°C to +85°C ambient temperature range. Housed in a 6-pin SC-88 (SC-70-6 / SOT-363) surface-mount package. #onsemi #NC7WZ07P6X #LogicBuffer #OpenDrain #NonInvertingBuffer #LogicIC #LevelShifter #I2C #SignalBuffer #WiredAND #SC88 #EmbeddedSystems

Synchronous Buck DC-DC Converter – 2 A synchronous step-down (buck) switching regulator for high-efficiency power conversion in industrial, automotive, and embedded applications. Operates from a 4.5 V to 36 V input voltage, provides an adjustable output voltage from 0.6 V to 34.2 V, and switches at a 500 kHz fixed frequency. Features 40 µA typical quiescent current, 100% duty-cycle operation, synchronous rectification, cycle-by-cycle current limiting, hiccup short-circuit protection, thermal shutdown, undervoltage lockout (UVLO), power-good output, and enable input. Operates over a −40°C to +150°C junction temperature range and is housed in a 6-pin SOT-23-THIN (DDC) package. #TexasInstruments #LMR51420 #LMR51420XDDCR #BuckConverter #DCDCConverter #SynchronousBuck #SwitchingRegulator #PowerManagement #2A #SIMPLESWITCHER #SOT236 #EmbeddedSystems