I identified the connector as Würth Elektronik 61200621621 and confirmed that its symbol matches the standard AVR ISP pinout. I’m documenting the wiring and sourcing guidance, with explicit caveats where mechanical compatibility or PDF verification remains unresolved.
The Würth Elektronik 61200621621 is a WR-BHD straight, through-hole box header with 2.54 mm pitch; this Flux part represents its six contacts as an AVR ISP programming interface. Its common use here is connecting an external programmer to an SPI-programmable AVR microcontroller using MISO, MOSI, SCK, RESET, target-voltage reference, and ground. Microchip SPI header mapping
Scope: The connector itself is passive: AVR signal names are application assignments, not functionality built into the connector. The current Flux symbol’s pin numbers were inspected and match the Mi...
Created the cited 61200621621 Application and Usage Guide in project files, covering all seven requested sections and sources. It distinguishes connector ratings from AVR operating limits and flags unresolved mechanical dimensions and replacement compatibility rather than claiming verified drop-ins.
Before fabrication or substitution, the next checks are footprint dimensions and target MCU/programmer compatibility; the schematic and footprint were left unchanged.