Connector Header Surface Mount, Right Angle 8 position 0.039" (1.00mm) SMT wire-to-board connector designed for electrical connection between PCB and wire harness in the JST SR/SZ series. It features an 8-circuit, 1.0 mm pitch side-entry SMT header with a 50 V AC/DC voltage rating, 0.7 A AC/DC current rating, and an operating temperature range of -25°C to +85°C. #Connector #WireToBoard #SMT #JST #1mmPitch #PCBComponent

1.0 mm Pitch Right-Angle SMT Board Header – 10-position shrouded wire-to-board header designed for consumer electronics, industrial equipment, IoT devices, portable electronics, embedded controllers, and compact PCB interconnect applications. Part of the JST SHL Series, it features a 1.00 mm pitch, single-row, right-angle surface-mount (SMT) configuration, and 1 A current rating with a 50 V voltage rating. Constructed with phosphor bronze contacts and tin-plated mating and termination surfaces, it provides reliable electrical performance and easy solderability. The connector includes four-wall shrouding, solder retention tabs for enhanced mechanical stability, and a UL94 V-0 rated polyamide (nylon) housing. Designed for operation over a −25°C to +85°C temperature range, it is supplied in tape-and-reel packaging for automated SMT assembly. #JST #SM10BSHLSTF #SHLSeries #BoardToBoardConnector #WireToBoard #SMTConnector #RightAngleConnector #10PinConnector #1mmPitch #IndustrialElectronics #IoT #EmbeddedSystems

5-Position Right-Angle Surface-Mount Wire-to-Board Header – Single-row shrouded PCB header designed for consumer electronics, IoT devices, industrial controls, automotive modules, portable equipment, and embedded systems requiring compact wire-to-board connections. The JST SM05B-SHLS-TF is part of the SHL Series, featuring 5 positions on a 1.00 mm pitch with a right-angle surface-mount (SMT) configuration for high-density PCB layouts. It incorporates phosphor bronze contacts with tin plating, a 4-wall shrouded housing, and solder retention tabs to improve mechanical strength during reflow soldering. Rated for 1 A and 50 V, it uses a UL94 V-0 polyamide (PA) housing and supports push-pull mating with compatible SHL series cable connectors. Designed for −25°C to +85°C operation, it is ideal for compact embedded and portable electronic applications. #JST #SM05BSHLSTF #SHLSeries #WireToBoard #PCBHeader #SurfaceMountConnector #RightAngleConnector #1mmPitch #EmbeddedSystems #IndustrialElectronics #IoT #BoardToCable

JST SM04B-SRSS-TB(LF)(SN) is a 4-position, 1.0 mm pitch, right-angle surface-mount JST SH PCB connector commonly used for STEMMA QT and Qwiic I²C connections. Keywords: SM04B-SRSS-TB, JST SH, 4-pin connector, 1.0mm pitch, STEMMA QT Qwiic The SM04B-SRSS-TB (LF)(SN) is a JST SH/SR series 4-position wire-to-board connector header designed for compact, high-density PCB applications. It features a 1.0 mm pitch, right-angle surface-mount (SMT) design, and a shrouded housing for secure mating and alignment. This connector is commonly used in space-constrained electronic devices where reliable signal transmission and low-profile mounting are required, such as in consumer electronics, industrial control boards, and embedded systems. It mates with compatible JST SH series housings, providing a secure push-fit connection for crimped wire assemblies. Key Features 4-position (1x4) wire-to-board connector header 1.0 mm fine pitch for compact PCB layouts Surface-mount (SMT), right-angle configuration Shrouded design for improved alignment and protection Rated current: 1 A per contact Rated voltage: 50 V AC/DC Low-profile height (~2.9 mm) Tin-plated contacts for reliable conductivity Operating temperature: -25°C to +85°C Compatible with JST SH/SR series mating housings Tape-and-reel packaging for automated PCB assembly #CommonPartsLibrary #Connector #JST #SM04BSRSSTB #SHSeries #SRSeries #WireToBoard #1mmPitch #SMTConnector #PCBConnector #ElectronicsComponents #ConnectorHeader