24 Bit Analog to Digital Converter 4, 8 Input 4 Sigma-Delta 56-VQFN (7x7) The ADS127L14 (quad) and ADS127L18 (octal) are 24-bit, delta-sigma (ΔΣ), analog-to-digital converters (ADCs) based on the single-channel ADS127L11. The devices provide simultaneous sampling of four or eight channels with data rates up to 512kSPS (wideband filter mode) and 1365kSPS (low-latency filter mode). Features • Simultaneously measure four or eight channels • Wideband filter mode: up to 512kSPS • Low-latency filter mode: up to 1365kSPS • Power-scalable speed modes: – Max speed: 512kSPS • 83mW (ADS127L14) • 165mW (ADS127L18) – High speed: 400kSPS • 64mW (ADS127L14) • 128mW (ADS127L18) – Mid speed: 200kSPS • 37mW (ADS127L14) • 74mW (ADS127L18) – Low speed: 50kSPS • 12mW (ADS127L14) • 24mW (ADS127L18) • AC performance with DC precision: (High-Speed Mode) – Dynamic range at 200kSPS: 112dB (typical) – THD: –118dB (typical) – INL: 1ppm of FSR (typical) – Offset drift: 10nV/°C (typical) – Gain drift: 0.5ppm/°C (typical) • Precharge buffered signal inputs • Programmable by pin setting or SPI • Frame-sync port for output data • Internal or external clock operation • Analog supply voltage: 2.85V to 5.5V 2 Applications • Test and measurement: – Data acquisition (DAQ) – Shock and vibration instruments – Acoustics and dynamic strain gauges • Factory automation and control: – Condition monitoring • Aerospace and defense: – Sonar • Medical: – Electroencephalograms (EEG) • Grid Infrastructure: – Power quality analyzers #ADS127L14IRSHT #TexasInstruments #ADC #DeltaSigmaADC #24BitADC #SimultaneousSampling #DataAcquisition #IndustrialAutomation #MedicalInstrumentation #PowerQuality #PrecisionMeasurement #EmbeddedSystems

Ultra-Low-Power Arm® Cortex®-M33 Microcontroller – 32-bit ultra-low-power microcontroller based on the Arm® Cortex®-M33 core with TrustZone® security for industrial IoT, wearable devices, smart sensors, medical equipment, home automation, metering, and battery-powered embedded applications. Operates at up to 160 MHz with 1 MB Flash memory, 786 KB SRAM, and a 1.71 V to 3.6 V supply voltage, delivering high performance while minimizing power consumption. Features single-precision FPU, DSP instructions, Memory Protection Unit (MPU), TrustZone® hardware security, 11-channel 12-/14-bit ADC, 2-channel 12-bit DAC, USB 2.0 Full-Speed OTG, CAN FD, I²C, SPI, UART/USART, SAI, SPDIF, LIN, SmartCard, motor-control PWM, DMA, Octo-SPI/Quad-SPI memory interface, AES-256, PKA, HASH, TRNG, secure boot, and tamper detection for secure, energy-efficient embedded designs. Provides 37 GPIOs, operates over a −40°C to +85°C temperature range, and is housed in a 48-pin LQFP (7 × 7 mm) package. #STMicroelectronics #STM32U575CGT6 #STM32U5 #CortexM33 #UltraLowPowerMCU #TrustZone #SecureMCU #IndustrialIoT #USBOTG #CANFD #EmbeddedSecurity #EmbeddedSystems

2.4 GHz Wi-Fi® + Bluetooth® 5 SoC – High-performance dual-core Xtensa® LX7 wireless System-on-Chip (SoC) for IoT devices, smart home products, industrial automation, AIoT, wearable electronics, HMI systems, and embedded wireless applications. Operates at up to 240 MHz with 512 KB on-chip SRAM and supports external SPI Flash and PSRAM. Integrates Wi-Fi 802.11 b/g/n (2.4 GHz) and Bluetooth® 5 (LE) with Long Range and 2 Mbps PHY, delivering up to +21 dBm transmit power and 150 Mbps maximum Wi-Fi data rate. Features native USB 2.0 OTG, AI vector instructions for machine learning acceleration, 30 GPIOs, SPI, I²C, I²S, UART, RMT, LCD/Camera interface, TWAI® (CAN-compatible), PWM, ADC, capacitive touch sensing, AES-128/256, SHA, RSA, ECC, HMAC, Flash encryption, Secure Boot, and a True Random Number Generator (TRNG) for secure embedded applications. Operates from a 3.0 V to 3.6 V supply, over a −40°C to +105°C temperature range, and is housed in a 56-pin QFN (7 × 7 mm) package. #EspressifSystems #ESP32S3 #WirelessSoC #WiFi #Bluetooth5 #DualCore #XtensaLX7 #USBOTG #AIoT #IoT #SecureBoot #FlashEncryption #EmbeddedSystems

Industrial RJ45 etherCON® Chassis Connector with LED Light Pipes – Ruggedized shielded RJ45 chassis receptacle for Ethernet networking, professional audio/video equipment, lighting control, industrial automation, broadcast systems, and embedded communication applications. Supports CAT5e performance, 8P8C (RJ45) connectivity, and IEEE 802.3bt PoE Type 4 Class 8 (up to 100 W). Features a vertical through-hole PCB mount, integrated latch-lock etherCON® interface, two light pipes for through-hole status LEDs, metal front plate with B-Series panel cutout, gold-plated bronze contacts, ground panel connection, and compatibility with standard RJ45 plugs or Neutrik etherCON® cable connectors (NE8MC series). Designed for rear panel mounting with up to 3 mm panel thickness, it provides over 1,000 mating cycles and operates over a −30°C to +80°C temperature range. #Neutrik #NE8FBVC5LED #etherCON #RJ45Connector #CAT5e #EthernetConnector #ChassisConnector #PoE #IndustrialNetworking #AudioVideo #PCBConnector #EmbeddedSystems

Triple 2:1 SPDT Precision Analog Multiplexer/Switch – Three-channel Single-Pole Double-Throw (SPDT) analog multiplexer/switch for signal routing, data acquisition systems, industrial automation, instrumentation, audio/video switching, medical electronics, and embedded analog applications. Operates from a single 5 V to 24 V supply or dual ±2.5 V to ±12 V supplies, with 1.8 V-compatible logic inputs for direct interfacing with modern microcontrollers and FPGAs. Features 240 Ω maximum on-resistance, 2 Ω typical channel-to-channel matching, 850 MHz bandwidth, 110 ns maximum turn-on time, 85 ns typical turn-off time, 3 pF off-capacitance, and −90 dB crosstalk at 1 MHz for high signal integrity. Includes break-before-make switching, rail-to-rail analog signal handling, low charge injection, and low leakage current, making it suitable for precision analog signal multiplexing. Specified for operation over a −55°C to +125°C temperature range and housed in a 16-pin TSSOP surface-mount package. #TexasInstruments #TMUX4053PWR #TMUX4053 #AnalogSwitch #AnalogMultiplexer #SPDT #SignalRouting #DataAcquisition #Instrumentation #IndustrialElectronics #TSSOP16 #EmbeddedSystems

8-Channel High-Side Source Driver Array – High-voltage, high-current source driver IC designed for LED and lamp driving, relay control, solenoid driving, industrial automation, printers, automotive electronics, PLCs, and embedded control systems. The Allegro UDN2981A integrates eight non-inverting high-side Darlington transistor outputs, allowing direct interfacing between TTL/CMOS logic and higher-voltage loads. Each output can source up to 500 mA, with an output voltage capability of up to 50 V, making it ideal for driving inductive and resistive loads. Features integrated input resistors, output clamp diodes for inductive load protection, and TTL/5 V CMOS-compatible inputs, simplifying circuit design and reducing external component count. Operates from a 4.75 V to 15 V logic supply, over a −20°C to +85°C temperature range, and is housed in an 18-pin DIP (through-hole) package for easy PCB integration. #Allegro #UDN2981A #HighSideDriver #SourceDriver #DarlingtonArray #RelayDriver #SolenoidDriver #LEDDriver #IndustrialAutomation #EmbeddedSystems #PowerDriver #TTLCompatible

12.288 MHz Temperature-Compensated Crystal Oscillator (TCXO) – High-stability HCMOS TCXO designed for wireless communications, GPS/GNSS receivers, audio systems, networking equipment, industrial automation, embedded controllers, and precision timing applications. Part of the ECS-TXO-5032 Series, it provides a 12.288 MHz output frequency with ±2.5 ppm frequency stability over temperature and ±1.5 ppm initial frequency tolerance for highly accurate clock generation. Operates from a 3.3 V supply with 6 mA maximum current consumption and features an HCMOS output, 10 ns maximum rise/fall time, 2 ms typical startup time, and −135 dBc/Hz phase noise at 1 kHz offset. Packaged in a compact 5.0 × 3.2 mm 4-pad SMD package, it is specified for operation over a −30°C to +85°C temperature range, making it ideal for precision embedded and RF timing applications. #ECSInc #ECSTXO50321228TR #TCXO #TemperatureCompensatedCrystalOscillator #12288MHz #HCMOS #PrecisionTiming #GPS #GNSS #WirelessCommunication #IndustrialElectronics #EmbeddedSystems

Power distribution and automation

2 Position Wire to Board Terminal Block Vertical with Board 0.138" (3.50mm) Surface Mount The 1250360000 is a high-quality PCB terminal block manufactured by Weidmüller, designed for secure and reliable wire-to-board connections. It features a robust screw-clamp connection system that ensures strong mechanical retention and excellent electrical conductivity. This component is widely used in industrial control systems, power distribution modules, and automation equipment where dependable field wiring is required. The terminal block is designed for easy installation on printed circuit boards and supports solid or stranded wires. Its durable housing material provides resistance to environmental stress, making it suitable for long-term operation in demanding applications. Key Features Screw clamp connection for secure wire termination Through-hole PCB mounting for strong mechanical stability High current carrying capability مقاust insulating housing with flame-retardant properties واضحة labeling area for easy identification Suitable for industrial and automation applications Electrical Characteristics Rated Voltage: 300 V (typical, verify datasheet) Rated Current: Up to 10–16 A (depending on wire size) Contact Resistance: Low (optimized for power applications) Insulation Resistance: High (>10⁸ Ω typical) Mechanical Characteristics Mounting Type: Through-Hole PCB Connection Type: Screw Clamp Number of Positions: Typically 2–12 positions (variant dependent) Wire Gauge Range: ~24 AWG to 12 AWG (approx.) Pitch: Typically 5.00 mm or 5.08 mm (verify exact variant) Material Information Housing Material: Polyamide (PA), flame-retardant (UL94 V-0) Contact Material: Copper alloy Contact Plating: Tin-plated Environmental Characteristics Operating Temperature Range: -40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Industrial control systems Power supply units Automation and PLC systems Signal and power distribution boards Building and factory wiring interfaces Notes Exact electrical ratings and pitch may vary depending on the specific configuration under this series. Always refer to the official Weidmüller datasheet for precise parameters before design integration. #commonpartslibrary #connector #terminalblock

IEEE 802.3bt Type 4 Power over Ethernet (PoE) Powered Device Module – High-power isolated PoE Powered Device (PD) module for IP cameras, wireless access points, LED lighting, digital signage, industrial automation, access control, IoT gateways, and embedded networking applications. Fully compliant with IEEE 802.3bt Type 4, it accepts a 36 V to 57 V PoE input and delivers up to 85 W output power with selectable 12 V or 24 V regulated outputs and an adjustable output voltage. Features a high-efficiency isolated DC-DC converter (up to 89%), 1.5 kV input-to-output isolation, integrated PD detection and classification, low output ripple and noise, and comprehensive overload, thermal, and short-circuit protection. Designed to minimize external components for simplified PoE implementation, it is housed in a compact through-hole DIL module (70 × 35 × 17 mm) and operates over a −40°C to +85°C temperature range. #Silvertel #AG5800 #PoEPoweredDevice #IEEE8023bt #PowerOverEthernet #PDModule #IsolatedDCDC #IndustrialEthernet #IPCamera #LEDLighting #EmbeddedPower #EmbeddedSystems

NMEA 2000® Micro Panel-Mount Circular Connector – 5-position male panel-mount circular receptacle for NMEA 2000®, marine networking, industrial automation, and sensor interface applications. Features an M12 × 1 threaded coupling, through-hole PCB solder termination, front-panel bulkhead mounting, 4 A current rating, and 60 V AC/DC voltage rating. Constructed with gold-plated copper alloy contacts, a nickel-plated zinc alloy shell, and a PA66 (Nylon 6/6) insulator. Provides IP68 dustproof and waterproof protection, threaded locking, and UL94 V-0 flammability-rated insulation. Specified for operation over a −40°C to +85°C temperature range. #AmphenolLTW #HMC05PMMPSF8001 #NMEA2000 #CircularConnector #M12Connector #PanelMount #MaleReceptacle #PCBConnector #IP68 #MarineElectronics #IndustrialConnector #EmbeddedSystems

Reflective Optical Sensor (Photointerrupter) – Reflective infrared optical sensor integrating an 850 nm IR emitter and silicon phototransistor receiver for object detection, proximity sensing, position detection, paper/media sensing, and industrial automation. Features a 2.3 mm sensing distance, daylight-blocking optical filter, and high ambient light immunity for reliable reflective detection. Operates with an IR LED forward current up to 50 mA, 1.25 V typical forward voltage, and a phototransistor collector-emitter voltage of up to 70 V. Provides fast response times, surface-mount (SMD) construction, and is specified for operation over a −40°C to +100°C temperature range. Housed in a 4-pin SMD reflective sensor package measuring approximately 4.2 × 2.5 × 1.7 mm. (ams-OSRAM) #amsOSRAM #SFH7250 #ReflectiveOpticalSensor #IRSensor #Phototransistor #InfraredLED #ProximitySensor #ObjectDetection #PositionSensor #IndustrialAutomation #SMDSensor #EmbeddedSystems

This LED driver board is a compact yet powerful solution supporting both 5V and 12V LED strips, including popular addressable RGB LEDs such as NeoPixel WS2812, WS2813, WS2815. Compatible with all XIAO boards, it enables smart control and automation through WLED and Home Assistant when using XIAO ESP32 Series, while offering flexible power options and comprehensive protection for safe, reliable operation in your lighting setup.