Complex Programmable Logic Device (CPLD) – EEPROM-based in-system programmable CPLD with 128 macrocells, 2,500 usable gates, 68 user I/O pins, and 8 logic array blocks for implementing custom digital logic. Operates from a 4.75 V to 5.25 V supply, features 10 ns maximum pin-to-pin propagation delay, IEEE 1149.1 JTAG boundary-scan, in-system programmability (ISP), and a programmable security bit. Housed in an 84-pin PLCC package and specified for an operating temperature range of 0°C to +70°C. #Altera #EPM7128SLC8410N #EPM7128 #MAX7000S #CPLD #ProgrammableLogic #EEPROM #ISP #JTAG #LogicDevice #PLCC84 #EmbeddedSystems

Video Separator IC NTSC, PAL, SECAM 8-PDIP Package # LM1881N/NOPB Engineering Specifications **General Description** The LM1881N/NOPB is a precision video synchronization separator integrated circuit manufactured by Texas Instruments. It is designed to extract timing information from composite video signals and generate synchronization outputs required for video processing, display control, video capture, and television signal applications. The device separates composite sync, vertical sync, burst or back-porch timing, and odd/even field information from standard analog video formats. It operates with both monochrome and color composite video signals and is commonly used in video synchronization systems, frame grabbers, video overlays, video switching equipment, and display synchronization circuits. The integrated circuit simplifies video timing recovery by eliminating the need for complex discrete-component sync separation circuits. Its low-power bipolar architecture provides reliable operation across a wide range of video applications while maintaining accurate synchronization detection. **Engineering Specifications** **Manufacturer:** Texas Instruments **Manufacturer Part Number:** LM1881N/NOPB **Component Type:** Video synchronization separator integrated circuit **Function:** Composite video sync extraction and timing separation **Technology:** Bipolar analog integrated circuit **Video Signal Compatibility:** Composite video input **Supported Video Formats:** NTSC, PAL and SECAM composite video systems **Input Signal Type:** Composite video **Composite Sync Output:** Available **Vertical Sync Output:** Available **Burst or Back-Porch Output:** Available **Odd/Even Field Output:** Available **Synchronization Detection:** Automatic extraction of video timing signals **Power Supply Configuration:** Single-supply operation **Supply Voltage Range:** Wide operating voltage range suitable for video processing systems **Power Consumption:** Low-power operation **Output Configuration:** TTL and CMOS compatible synchronization outputs **Input Coupling:** AC-coupled composite video input **Noise Immunity:** High immunity to video signal disturbances and noise **Signal Processing Capability:** Composite sync, vertical sync and field identification extraction **Applications Compatibility:** Video displays, frame grabbers, video processors, video switching systems and synchronization controllers **Operating Temperature Range:** Commercial temperature range **Package Type:** Plastic dual in-line package **Package Configuration:** Through-hole mounting package **Pin Configuration:** Standard DIP package layout **Mounting Style:** Through-hole **Environmental Compliance:** Lead-free and RoHS compliant NOPB version **Reliability Features:** Stable synchronization extraction and accurate timing recovery **Typical Applications** Video synchronization circuits Video capture equipment Frame grabber systems Television signal processing Video overlay generators Video switching equipment Security and surveillance video systems Display synchronization controllers Industrial video monitoring equipment Embedded video processing systems #LM1881N #LM1881NNOPB #TexasInstruments #VideoSyncSeparator #CompositeVideo #VideoProcessing #EmbeddedSystems #SignalProcessing #FrameGrabber #VideoElectronics #AnalogIC #ElectronicComponents #EngineeringSpecifications #VideoSynchronization

SPI Flash 32M-BIT Serial Flash Memory with Dual, Quad SPI The W25Q32JV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on 2.7V to 3.6V power supply with current consumption as low as 1µA for power-down. The W25Q32JV array is organized into 16,384 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q32JV has 1,024 erasable sectors and 64 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage. (See Figure 2.) The W25Q32JV supports the standard Serial Peripheral Interface (SPI), and a high performance Dual/Quad output as well as Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2, and I/O3. SPI clock frequencies of up to 133MHz are supported allowing equivalent clock rates of 266MHz (133MHz x 2) for Dual I/O and 532MHz (133MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O instructions. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories.  New Family of SpiFlash Memories – W25Q32JV: 32M-bit / 4M-byte – Standard SPI: CLK, /CS, DI, DO – Dual SPI: CLK, /CS, IO0, IO1, – Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3 – Software & Hardware Reset(1)  Highest Performance Serial Flash – 133MHz Single, Dual/Quad SPI clocks – 266/532MHz equivalent Dual/Quad SPI – 66MB/S continuous data transfer rate – Min. 100K Program-Erase cycles per sector – More than 20-year data retention  Efficient “Continuous Read” – Continuous Read with 8/16/32/64-Byte Wrap – As few as 8 clocks to address memory – Allows true XIP (execute in place) operation – Outperforms X16 Parallel Flash  Low Power, Wide Temperature Range – Single 2.7V to 3.6V supply – <1µA Power-down (typ.) – -40°C to +85°C operating range – -40°C to +105°C operating range  Flexible Architecture with 4KB sectors – Uniform Sector/Block Erase (4K/32K/64K-Byte) – Program 1 to 256 byte per programmable page – Erase/Program Suspend & Resume  Advanced Security Features – Software and Hardware Write-Protect – Special OTP protection(2) – Top/Bottom, Complement array protection – Individual Block/Sector array protection – 64-Bit Unique ID for each device – Discoverable Parameters (SFDP) Register – 3X256-Bytes Security Registers – Volatile & Non-volatile Status Register Bits #CommonPartsLibrary #IntegratedCircuit

IC RF TxRx + MCU General ISM < 1GHz Z-Wave® 863MHz ~ 870MHz, 902MHz ~ 928MHz 48-VFQFN Exposed Pad The Silicon Labs EFR32ZG23B020F512IM48-B is a 2.4 GHz–independent (sub-GHz) RF Tx/Rx + MCU SoC optimized for Z-Wave smart home and IoT mesh networks. It integrates computing, RF communication, and security features in a compact 48-pin QFN package. It is part of the EFR32ZG23 Series 2 platform, which focuses on low-power, secure, long-range wireless connectivity for smart home, building automation, and industrial IoT devices. Key Features MCU Core & Memory ARM Cortex-M33 core (up to ~80 MHz) 512 kB Flash memory 64 kB RAM RF / Wireless Z-Wave protocol support (mesh + long-range) Frequency bands: 863–870 MHz (EU) 902–928 MHz (US) Max data rate: up to 100 kbps Output power: up to +20 dBm High sensitivity: around –110 dBm Security Secure Vault™ high-level security subsystem Hardware cryptography support Secure boot and key protection (IoT-grade security) Low Power Performance Ultra-low receive and transmit currents (single-digit mA RX, tens of mA TX) Designed for battery-powered IoT nodes Peripherals & Interfaces GPIO (up to ~31 pins depending on variant) ADC, I2C, SPI, UART, I2S, IrDA Flexible digital/analog peripheral integration Package & Electrical 48-pin QFN (6 × 6 mm) Supply voltage: 1.71 V – 3.8 V Industrial temperature range: –40°C to +125°C #CommonPartsLibrary #IntegratedCircuit #RF-transceiver #EFR32ZG23B020

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.412GHz ~ 2.484GHz PCB Trace Surface Mount SP32-C3-MINI-1-N4 is a compact Wi-Fi + Bluetooth Low Energy (BLE) module based on Espressif’s ESP32-C3 chip, designed for low-power IoT and embedded applications. The module integrates a RISC-V 32-bit single-core processor with wireless connectivity, making it suitable for cost-sensitive and power-efficient smart devices. Key features Processor: 32-bit RISC-V single-core CPU (up to 160 MHz) Wireless: Wi-Fi 2.4 GHz (802.11 b/g/n) Bluetooth 5 (LE support) Flash: “N4” variant typically includes 4 MB SPI flash Memory: Internal SRAM for lightweight embedded applications Security features: Secure boot Flash encryption Hardware cryptographic acceleration Low power modes: Deep sleep support for battery-powered devices GPIO: Multiple general-purpose I/O pins (shared with peripherals like UART, SPI, I2C, ADC, PWM) Package: Compact “MINI” form factor for space-constrained PCB designs #CommonPartsLibrary #Module #RF

Security Authentication ICs SE050B1HQ1/Z01SEZ WQFN-20_L3.0-W3.0-P0.40-BL-EP1.7 LCSC Part Number: C2659340 JLCPCB Part Class: Extended Part Manufactured by NXP(恩智浦)

Security Authentication ICs SE050C2HQ1/Z01SDZ WQFN-20_L3.0-W3.0-P0.40-BL-EP1.7 LCSC Part Number: C2659345 JLCPCB Part Class: Extended Part Manufactured by NXP(恩智浦)

Security Authentication ICs SE050B2HQ1/Z01SFZ QFN-20_L3.0-W3.0-P0.40-BL-EP1.9 LCSC Part Number: C2659339 JLCPCB Part Class: Extended Part Manufactured by NXP(恩智浦)

Security Authentication ICs SE050A2HQ1/Z01SHZ WQFN-20_L3.0-W3.0-P0.40-BL-EP1.7 LCSC Part Number: C2659338 JLCPCB Part Class: Extended Part Manufactured by NXP(恩智浦)

Security Authentication ICs SE050C1HQ1/Z01SCZ WQFN-20_L3.0-W3.0-P0.40-BL-EP1.7 LCSC Part Number: C2650415 JLCPCB Part Class: Extended Part Manufactured by NXP(恩智浦)