TVS DIODE 5VWM 9.2VC SOD-123FL The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. SMF package is 50% smaller in footprint when compare to SMA package and deliverying one of the low height profiles (1.1mm) in the industry • 200W peak pulsepower capability at 10/1000µs waveform, repetition rate (duty cycle): 0.01% •Compatible with industrial standard package SOD-123FL • Low profile: maximum height of 1.1mm. • Low inductance, excellent clamping capability • For surface mounted applications to optimize board space • High temperature to reflow soldering guaranteed: 260°C/430sec • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) • ESD protection of data lines in accordance with IEC 61000-4-2 • EFT protection of data lines in accordance with IEC 61000-4-4 • Fast response time: typically less than 1.0ns from 0 Volts to VBR min • Glass passivated junction • Built-in strain relief • Plastic package is flammability rated V-0 per UL 94 • Meet MSL level1, per J-STD-020, LF maximun peak of 260°C • Matte tin lead–free plated • Halogen-free and RoHS compliant • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD609A.01) • UL Recognized to UL 497B as an Isolated Loop Circuit Protector. #CommonPartsLibrary #Diode

Pin Headers 2.54-2*2P立贴针 HDR-SMD_4P-P2.54-V-M-R2-C2-LS7.5 LCSC Part Number: C919361 JLCPCB Part Class: Extended Part Manufactured by BOOMELE(博穆精密) 2.54mm dual-row through-hole pin header, straight vertical PCB mount, 0.64mm square pins, 2.54mm pitch, double-row male connector, brass contacts with tin-over-nickel plating, black UL94V-0 polyester insulator, rated 3A per contact, 500VAC dielectric withstand voltage, 20mΩ maximum contact resistance, 1000MΩ minimum insulation resistance, operating temperature -40°C to +105°C (tin plated), suitable for board-to-board connections, IDC cable connectors, development boards, industrial electronics and general PCB interconnect applications. Search Keywords: 2.54mm pin header, dual row pin header, 2xN pin header, 2.54mm male header, through hole header, THT pin header, vertical pin header, straight pin header, 0.64mm square pin header, double row header connector, IDC header, PCB header connector, 2x5 pin header, 2x10 pin header, 2x20 pin header, 2.54mm box header alternative, PA6T pin header Hashtags: #2p54PinHeader #DualRowHeader #MalePinHeader #THTHeader #ThroughHoleHeader #VerticalPinHeader #StraightPinHeader #254mmPitch #DoubleRowConnector #BoardToBoardConnector #IDCHeader #PCBConnector #SquarePinHeader #PinHeader2xN #ElectronicsConnector

Power Barrel Connector Jack 2.40mm ID (0.094"), 5.50mm OD (0.217") Through Hole, Right Angle #Connector #Interconnect #Barrel-Connector #Power-Connector #DCJ235

The ADF6-100-03.5-L-4-2-A-TR is a high-density board-to-board mezzanine connector from the Samtec AcceleRate® HD series. It is designed for high-speed and high-performance interconnect applications requiring compact size, excellent signal integrity, and high pin density. This connector features a fine 0.635 mm pitch with a 4-row socket configuration, making it suitable for advanced embedded systems, networking equipment, data communication devices, industrial electronics, and high-speed computing platforms. Key Features High-density mezzanine connector system 0.635 mm fine pitch design 4-row socket configuration Supports high-speed data transmission up to 64 Gbps PAM4 / 32 Gbps NRZ Optimized Edge Rate® contact system for improved signal integrity Surface-mount (SMD) mounting style Gold-plated contacts for reliable electrical performance Compact low-profile design Designed for board-to-board stacking applications Compatible with multiple stacking heights Suitable for PCIe®, CXL®, networking, AI, telecom, and embedded systems applications Tape-and-reel packaging for automated assembly processes #Connector

Connector Header Through Hole, Right Angle 6 position 0.049" (1.25mm) #CommonPartsLibrary #Connector #Interconnect #Rectangular-Connector #Header #Male-Pin #PicoBlade-53048

JST XH Connector Header Through Hole 2 position 0.098" (2.50mm) Connector header for wire-to-board interconnection, providing a 2-position through-hole interface for mating with JST XH Series crimp housings. It features a 2.50 mm pitch, a rated current of 3 A AC/DC, a rated voltage of 250 V AC/DC, and supports conductors from AWG 30 to AWG 22 when used with the specified mating contacts. #Connector #WireToBoard #Header #ThroughHole #2Position #2_50mmPitch #JST #XHSeries

Connector header for wire-to-board interconnection, providing a 2-position, side-entry surface-mount interface compatible with the JST PH Series 2.0 mm pitch connector system. It is rated for 100 V AC/DC and 2 A, and features a shrouded right-angle SMT design with hold-down solder tabs for PCB mounting. #Connector #WireToBoard #Header #JST #PHSeries #2mmPitch #SMT #RightAngle #2Position #100V #2A

4-Position Through-Hole Male Pin Header – Single-row vertical PCB header designed for board-to-board interconnects, wire-to-board connections, industrial control systems, embedded electronics, instrumentation, prototyping, and general-purpose electronic applications. The Samtec TSW-104-07-G-S is part of the TSW Series, featuring 4 male pins on a 2.54 mm (0.100") pitch with a through-hole vertical mounting configuration. It utilizes square phosphor bronze contacts with 10 µin (0.25 µm) gold plating on the mating surface and gold-plated posts for excellent conductivity, corrosion resistance, and long-term reliability. The connector features a 0.230 in (5.84 mm) mating pin length, 0.100 in (2.54 mm) post length, push-pull mating, and a black UL94 V-0 PBT insulator. Rated for up to 5.7 A per contact (application dependent) and suitable for operation over a −55°C to +125°C temperature range, it is ideal for rugged industrial and embedded system designs. #Samtec #TSW10407GS #TSWSeries #MaleHeader #PinHeader #ThroughHoleConnector #BoardToBoard #254mmPitch #IndustrialElectronics #EmbeddedSystems #PCBConnector

Connector Header Through Hole, Right Angle 3 position 0.100" (2.54mm) Pin header connector for board-to-board interconnection, featuring a 3-position, single-row, right-angle through-hole configuration with a 2.54 mm pitch. It is rated for 250 V and 3 A, uses gold-plated contacts, and is specified for an operating temperature range of −40 °C to +105 °C. #PinHeader #BoardToBoard #Connector #ThroughHole #RightAngle #2.54mmPitch #3Pin #250V #3A #WurthElektronik #WRPHD

2-Position Horizontal Through-Hole Terminal Block – Single-level wire-to-board terminal block designed for industrial automation, power supplies, control systems, instrumentation, HVAC equipment, embedded electronics, and general-purpose PCB power connections. The Würth Elektronik 691137710002 is part of the WR-TBL Series 1377, featuring 2 positions on a 5.00 mm pitch with a horizontal (side-entry) wire orientation and through-hole PCB mounting. It utilizes a screw clamp with leaf spring and wire guard for secure wire retention, supporting 12–30 AWG conductors. Rated for 16 A and 300 V, it is constructed with nickel-plated copper alloy contacts, a zinc-plated M2.5 screw, and a polycarbonate (PC) housing. The terminal block has a recommended tightening torque of 0.4 Nm (3.5 lb-in) and operates over a −30°C to +120°C temperature range, making it suitable for reliable industrial and embedded power interconnections. #WurthElektronik #691137710002 #WRTBL1377 #TerminalBlock #WireToBoard #ScrewTerminal #ThroughHoleConnector #IndustrialAutomation #PowerSupply #EmbeddedSystems #PCBConnector #ControlSystems

2-Position Vertical Through-Hole Male Pin Header – Single-row unshrouded PCB header designed for board-to-board interconnects, wire-to-board connections, industrial controls, embedded systems, instrumentation, development boards, prototyping, and general-purpose electronic applications. The Würth Elektronik 61300211121 is part of the WR-PHD Series, featuring 2 male pins on a 2.54 mm (0.100") pitch with a vertical through-hole mounting configuration. It utilizes square copper alloy contacts with gold-plated mating surfaces, providing excellent conductivity, corrosion resistance, and long-term reliability. The connector features a 6.00 mm mating pin length, 3.00 mm PCB post length, 11.54 mm overall contact length, push-pull mating, and a UL94 V-0 rated PA6T (Nylon 6T) black insulator. Rated for 3 A and 250 V, it operates over a −40°C to +105°C temperature range, making it ideal for reliable embedded, industrial, and prototyping applications. #WurthElektronik #61300211121 #WRPHD #MaleHeader #PinHeader #ThroughHoleConnector #BoardToBoard #254mmPitch #IndustrialElectronics #EmbeddedSystems #PCBConnector