61300211121 Application Guide

flux

I’ll research the manufacturer’s specifications, check alternatives and sourcing, and write a cited application guide in the project files.

flux

I verified the electrical ratings and found a Samtec alternative with different pin lengths, so it is not a guaranteed drop-in replacement. I’m finishing the guide with explicit caveats for the unresolved PCB hole dimensions and alternative-part compatibility.
Created a project doc

61300211121 Application and Usage Guide

View Document
61300211121 Application and Usage Guide
The Würth Elektronik 61300211121 WR-PHD is a two-position, single-row, straight through-hole male pin header on a 2.54 mm (0.100 in) pitch, intended for board-to-board or cable interconnects. Manufacturer product page Its common practical uses are a two-wire low-voltage power connection or a removable configuration jumper; neither contact has an intrinsic power, ground, or signal function.
1. Quick Specifications
Rating interpretation: This passive connector has manufacturer electrical and environmental ratings, not an IC-style Absolute Maximum Ratings / Recommended Operating Conditions split. Do not interpret its ratings as typical operating point...

flux

Created the cited 61300211121 Application and Usage Guide in project files, covering all seven requested sections and sources. It distinguishes verified ratings from practical recommendations and labels both alternatives as functionally similar—not guaranteed drop-ins.
Exact PCB hole dimensions, physical pin-1 identification, and current purchasing MOQ remain explicitly unverified.
Sign up to send

Files

Pins

Symbol

Layout

3D View

P1
P2
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
P1
1
Unspecified
P2
2
Unspecified

61300211121