Microcontroller – 32-bit Arm® Cortex®-M0+ microcontroller operating at up to 64 MHz, featuring 512 KB Flash memory, 144 KB SRAM, and 30 programmable I/O pins. Operates from a 1.7 V to 3.6 V supply and integrates a 13-channel 12-bit ADC, 2-channel 12-bit DAC, three analog comparators, and communication interfaces including CAN FD, USB 2.0 Full-Speed, USB Type-C® Power Delivery, I²C, SPI, I²S, UART/USART, HDMI-CEC, IrDA, and LIN. Includes DMA, PWM timers, brown-out detect/reset, power-on reset (POR), and watchdog timer (WDT) peripherals. Housed in a 32-pin UFQFPN (5 × 5 mm) package. #STMicroelectronics #STM32 #STM32G0B1KEU6 #Microcontroller #ARMCortexM0Plus #32BitMCU #64MHz #512KBFlash #144KBSRAM #ADC #DAC #CANFD #USB2 #USBTypeC #I2C #SPI #I2S #UART #UFQFPN32 #EmbeddedSystems

High-Speed Automotive Comparator – Single rail-to-rail high-speed comparator with push-pull output, adjustable hysteresis, and latch function for fast signal detection applications. Operates from a 2.4 V to 5.5 V supply, features 2.5 ns typical propagation delay, 325 MHz toggle frequency, ±5 mV maximum input offset voltage, and an input common-mode range extending 200 mV beyond both supply rails. Includes power-on reset (POR) functionality and is specified for an operating temperature range of −40°C to +125°C. Housed in a 6-pin SC70 (DCK) package. #TexasInstruments #TLV3603QDCKRQ1 #TLV3603Q1 #Comparator #HighSpeedComparator #RailToRail #PushPullOutput #AdjustableHysteresis #Latch #325MHz #2_5ns #SC70 #Automotive #EmbeddedSystems

Ultra-Low IQ Synchronous Buck DC-DC Converter – 300 mA synchronous step-down (buck) switching regulator for high-efficiency industrial, automotive, battery-powered, and embedded power applications. Operates from a 3 V to 65 V input voltage, provides an adjustable output voltage from 1.0 V to 65 V, and delivers up to 300 mA output current. Features 6 µA typical quiescent current, programmable switching frequency from 200 kHz to 2.2 MHz, 100% duty-cycle operation, synchronous rectification, Power Good (PG) output, enable input, soft-start, cycle-by-cycle current limiting, hiccup short-circuit protection, thermal shutdown, and undervoltage lockout (UVLO). Specified for operation over a −40°C to +150°C junction temperature range and housed in a 9-pin VQFN-HR (2 × 2 mm) wettable-flank package. #TexasInstruments #LMR36503RFRPER #LMR36503 #BuckConverter #SynchronousBuck #DCDCConverter #SwitchingRegulator #PowerManagement #UltraLowIQ #300mA #VQFN9 #EmbeddedSystems

1/4-Inch Stereo Phone Jack Connector – Female 3-conductor (TRS) audio jack for panel-mount, through-hole PCB applications. Features horizontal PCB mounting, right-angle orientation, tip, ring, and sleeve (T+R+S) normalling contacts, 3 A current rating per contact, 1 kVDC dielectric strength, ≤10 mΩ contact resistance, ≥1 GΩ insulation resistance, and a retention spring for secure plug engagement. Supports more than 10,000 mating cycles, operates over a −25°C to +70°C temperature range, and includes a metal nose with efficient chassis grounding for improved EMI performance. #Neutrik #NRJ6HM1 #AudioJack #TRSJack #PhoneJack #StereoJack #QuarterInchJack #PanelMount #ThroughHole #PCBConnector #AudioConnector #EmbeddedSystems

General-Purpose Power Relay – Single-Pole Double-Throw (SPDT, 1 Form C) electromechanical power relay designed for industrial control, home appliances, power supplies, HVAC systems, motor control, automation equipment, and embedded switching applications. Features a 5 VDC coil voltage, 10 A contact rating, and supports switching of up to 250 VAC or 125 VDC loads. Equipped with AgSnO (silver tin oxide) contacts for high durability and excellent switching performance, it provides fully sealed construction for improved environmental resistance. The relay has a through-hole PCB mount, non-latching coil with 63 Ω coil resistance (79.4 mA coil current), 10 ms maximum operate time, 5 ms maximum release time, and Class B coil insulation. Certified by UL, CSA, TÜV, and VDE, it operates over a −25°C to +85°C temperature range and is supplied in a compact PCB through-hole package. #Aratas #G5LE14DC5 #PowerRelay #SPDTRelay #ElectromechanicalRelay #GeneralPurposeRelay #10ARelay #5VRelay #IndustrialAutomation #MotorControl #ThroughHole #EmbeddedSystems

Sub-GHz Wireless Microcontroller – Ultra-low-power Sub-GHz wireless microcontroller integrating a 64 MHz Arm® Cortex®-M0+ core with an RF transceiver for LPWAN, smart metering, industrial IoT, building automation, asset tracking, and wireless sensor networks. Features 128 KB Flash, 32 KB SRAM, and supports Sub-GHz operation from 413–479 MHz and 826–958 MHz (including regional ISM bands), with up to +20 dBm transmit power, −132 dBm receiver sensitivity, and data rates up to 600 kbps. Supports Sigfox, KNX RF, IEEE 802.15.4g, Mioty, and proprietary wireless protocols using 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, ASK, OOK, DBPSK, and DSSS modulation. Operates from a 1.7 V to 3.6 V supply and includes 17 GPIOs, 12-bit ADC, timers, DMA, SPI, I²C, UART/USART, I²S, IrDA, PWM, watchdog, AES hardware accelerator, true random number generator (TRNG), and low-power wake-up receiver. Specified for operation over a −40°C to +105°C temperature range and housed in a 32-pin VFQFPN (5 × 5 mm) package. #STMicroelectronics #STM32WL33KBV7 #STM32WL33 #SubGHzMCU #WirelessMCU #CortexM0Plus #LPWAN #Sigfox #KNXRF #IEEE802154g #Mioty #IoT #EmbeddedSystems

7-Port Gigabit Managed Ethernet Switch IC – High-performance Layer 2 managed Ethernet switch designed for industrial automation, IoT gateways, embedded networking, automotive networking, IP cameras, networked audio/video systems, and communication equipment. Integrates 7 Gigabit Ethernet ports with 5 integrated 10/100/1000BASE-T PHYs, 1 SGMII interface, and 1 configurable RGMII/MII/RMII interface, enabling flexible network architectures. Supports IEEE 802.3 Ethernet standards, QoS, VLAN (802.1Q), Rapid Spanning Tree Protocol (RSTP), IGMP snooping, LinkMD® cable diagnostics, Energy Efficient Ethernet (EEE), Wake-on-LAN (WoL), port mirroring, rate limiting, and advanced packet filtering for robust managed networking. Features I²C and SPI management interfaces, operates from 1.8 V, 2.5 V, and 3.3 V supplies, and is specified for the −40°C to +85°C industrial temperature range. Packaged in a 128-pin TQFP-EP (14 × 14 mm) for high-density embedded networking designs. #Microchip #KSZ9897STXITR #KSZ9897 #GigabitEthernetSwitch #ManagedSwitch #Layer2Switch #IndustrialEthernet #SGMII #RGMII #IoTGateway #NetworkController #EmbeddedSystems

Polymeric PTC Resettable Fuse – Surface-mount resettable overcurrent protection device with a 9 V maximum operating voltage, 200 mA hold current (Ih), 500 mA trip current (It), and 100 A maximum fault current. Features 400 mΩ minimum initial resistance, 3.5 Ω maximum post-trip resistance, 20 ms typical time-to-trip, and operates over a −40°C to +85°C temperature range. Housed in an 0805 (2012 Metric) concave surface-mount package. #BelFuse #0ZCK0020FF2G #PTCResettableFuse #PolymericPTC #ResettableFuse #OvercurrentProtection #CircuitProtection #SurfaceMount #0805 #PassiveComponents #EmbeddedSystems

Non-Synchronous Buck DC-DC Converter – 3 A non-synchronous step-down (buck) switching regulator with an integrated 80 V, 3.5 A power MOSFET for industrial, telecom, and high-voltage power supply applications. Operates from a 12 V to 76 V input voltage, provides an adjustable output voltage from 1.0 V to 76 V, and features a programmable switching frequency from 50 kHz to 750 kHz. Includes current-mode control, soft-start, enable input, 0 µA standby current, precision reference (±1.5%), externally programmable undervoltage lockout (UVLO) with hysteresis, overcurrent protection (OCP), overvoltage protection (OVP), and thermal shutdown (TSD). Specified for operation over a −40°C to +85°C temperature range and housed in an 8-pin HTSOP-J exposed-pad package. #ROHM #BD9G341AEFJE2 #BD9G341AEFJ #BuckConverter #DCDCConverter #StepDownRegulator #SwitchingRegulator #PowerManagement #3A #80VMOSFET #IndustrialPower #HTSOPJ8 #EmbeddedSystems

IoT Secure Element with EdgeLock® SE051 Security Technology – Hardware-based secure element IC designed for IoT security, connected devices, industrial automation, smart home systems, automotive applications, cloud authentication, and embedded cybersecurity solutions. Provides a tamper-resistant secure environment for cryptographic key storage, device identity protection, secure authentication, and trusted communication. Features Common Criteria EAL5+ certified secure hardware, EdgeLock® secure architecture, ECC and RSA cryptographic support, AES encryption/decryption, SHA-2 hashing, HMAC, True Random Number Generator (TRNG), secure key generation, and secure object storage for protecting sensitive credentials and certificates. Supports I²C communication interface with host microcontrollers and is compatible with secure cloud platforms and IoT provisioning workflows. Operates from a 1.71 V to 3.6 V supply, supports −40°C to +105°C industrial temperature operation, and is housed in a compact 20-HX2QFN (3 × 3 mm) surface-mount package. #NXP #SE051C2HQ1Z01XDZ #EdgeLockSE051 #SecureElement #IoTSecurity #HardwareSecurity #Cryptography #SecureAuthentication #AES #ECC #RSA #TRNG #IndustrialIoT #EmbeddedSystems

Digital Temperature Sensor – 16-bit digital temperature sensor with I²C/SMBus 3.0 interface for local temperature measurement from −40°C to +125°C. Operates from a 1.5 V to 3.6 V supply and provides ±0.5°C accuracy over the −10°C to +60°C range. Features programmable temperature thresholds, ALERT output, one-shot mode, support for up to 1 MHz I²C clock, and up to four selectable I²C addresses. Housed in a 6-pin UDFN (2 × 2 mm) package. #STMicroelectronics #STTS22H #STTS22HTR #TemperatureSensor #DigitalTemperatureSensor #I2C #SMBus #16Bit #TemperatureMonitoring #UDFN6 #EmbeddedSystems #Sensors

Ultra-Low-Power Omnipolar Hall-Effect Switch – Digital omnipolar Hall-effect switch optimized for lid/door detection, proximity sensing, magnetic position detection, industrial controls, consumer electronics, and battery-powered embedded systems. Operates from a 1.65 V to 5.5 V supply with an ultra-low 3 µA maximum supply current, making it ideal for low-power applications. Features a push-pull digital output, omnipolar operation (responds to either north or south magnetic poles), sleep mode, and high magnetic sensitivity with ±3 mT typical operate point and ±0.8 mT typical release point. Supports up to 5 mA output current, provides built-in hysteresis for noise immunity, and operates over a −40°C to +125°C temperature range. Housed in a compact 3-pin SOT-23 (DBZ) surface-mount package. #TexasInstruments #TMAG5231C1DQDBZR #TMAG5231 #HallEffectSensor #OmnipolarSwitch #MagneticSensor #PositionSensor #ProximitySensor #LowPower #BatteryPowered #SOT23 #EmbeddedSystems

Automotive CAN FD Transceiver – High-speed CAN FD transceiver compliant with ISO 11898-2:2016 for automotive ECUs, body electronics, industrial automation, motor control, battery management systems (BMS), and embedded communication networks. Supports Classical CAN and CAN FD communication with data rates up to 8 Mbps, operating from a 4.5 V to 5.5 V supply. Features standby mode with ultra-low power consumption, ±58 V bus fault protection, TXD dominant timeout, thermal shutdown, undervoltage protection, 100 mV receiver hysteresis, and failsafe operation for robust and reliable CAN communication. Qualified to AEC-Q100 Grade 1, it operates over a −40°C to +125°C junction temperature range and is housed in a standard 8-pin SOIC package. Unlike the TCAN1462VDRBRQ1, this version does not include Signal Improvement Capability (SIC), making it suitable for conventional CAN/CAN FD networks. #TexasInstruments #TCAN1462VDRQ1 #TCAN1462Q1 #CANFD #CANTransceiver #AutomotiveElectronics #IndustrialCommunication #BatteryManagement #AECQ100 #SOIC8 #EmbeddedSystems

Automotive Smart High-Side Power Switch – Single-channel N-channel smart high-side power switch for automotive power distribution and wire harness protection. Operates from a 4.1 V to 28 V supply (2.75 V minimum during cranking), supports a 15.7 A nominal load current, and features an ultra-low 3.6 mΩ typical RDS(on). Includes adjustable overcurrent protection (24 A to 137.5 A), integrated I²t wire protection, analog current sensing, open-load detection (ON/OFF state), short-circuit protection, reverse battery protection, overvoltage protection, undervoltage lockout (UVLO), overtemperature protection, slew-rate control, and logic-level control input. Qualified to AEC-Q100 and ISO 26262-compliant, it operates over a −40°C to +150°C junction temperature range and is housed in a 14-pin PG-TSDSO exposed-pad package. #Infineon #BTG7003A1EPWXUMA1 #PROFET #HighSideSwitch #SmartPowerSwitch #Automotive #PowerDistribution #LoadDriver #CurrentSense #WireProtection #AECQ100 #ISO26262 #EmbeddedSystems