LED Driver IC 16 Output Linear Shift Register PWM Dimming 40mA 24-TSSOP-EP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LEDdriver

Synchronous step-down PWM controller, 4.5v to 60v input, 0.6v to 54v Output Voltage, HTSSOP-16 PWM step down buck converter controller synchronous POL HTSSOP*EP*4.4x5mm*P0.65mm*

High- and Low-Side, Bidirectional, Zero-Drift, Current-Sense Amplifier With Enhanced PWM Rejection, 20V/V, SOIC-8 current monitor shunt sensor bidirectional high low SOIC*3.9x4.9mm*P1.27mm*

Application Processor integrating a quad-core Arm Cortex-A55 64-bit CPU operating at up to 2.0 GHz, an Arm Mali-G52 2EE GPU, and a 1 TOPS INT8 NPU. Supports DDR3/DDR3L/DDR4/LPDDR3/LPDDR4/LPDDR4X memory, 4K H.264/H.265/VP9 video decoding, 1080p60 H.264/H.265 video encoding, and interfaces including PCIe 3.0, SATA 3.0, USB 3.0/2.0, Gigabit Ethernet, HDMI 2.0, eDP 1.3, MIPI-CSI, MIPI-DSI, CAN, SDIO/eMMC, UART, SPI, I²C, and PWM. Packaged in a FCBGA636L (19 × 19 mm) package. Hashtags: #ApplicationProcessor #SoC #Rockchip #RK3568 #CortexA55 #MaliG52 #NPU #EmbeddedProcessor #AIoT #FCBGA636 #BGA636 #DDR4 #LPDDR4X #PCIe3 #USB3 #HDMI2 #GigabitEthernet

ESP32-S3-MINI-1-N8 is a compact, low-power Wi-Fi and Bluetooth module from Espressif Systems based on the ESP32-S3 SoC. It integrates a dual-core Xtensa LX7 processor, 8 MB flash memory, crystal oscillator, RF matching circuitry, and a PCB antenna in a small SMD package, making it ideal for IoT devices, smart home products, industrial automation, HMI applications, AIoT edge devices, and USB-connected embedded systems. Key Features Dual-core 32-bit Xtensa LX7 CPU Up to 240 MHz operating frequency Includes single-precision floating-point unit (FPU) for enhanced processing performance. Integrated Memory 8 MB Quad SPI Flash (N8 variant) 512 KB SRAM 384 KB ROM 16 KB RTC SRAM. Wireless Connectivity 2.4 GHz Wi-Fi 4 (802.11 b/g/n) Data rates up to 150 Mbps Bluetooth 5 LE with Bluetooth Mesh support Simultaneous Wi-Fi and Bluetooth operation through an integrated coexistence mechanism. Rich Peripheral Set Up to 39 GPIOs USB 2.0 OTG USB Serial/JTAG SPI, I²C, I²S, UART PWM, MCPWM SDIO Host ADC Touch sensing Temperature sensor TWAI® (CAN 2.0 compatible) Timers and watchdogs. Integrated Components On-board 40 MHz crystal oscillator PCB antenna RF matching network Compact certified module design. Operating Conditions Supply voltage: 3.0 V to 3.6 V Operating temperature: −40°C to +85°C. Compliance RoHS and REACH compliant RF-certified module for simplified product development. #RF_transceiver #Module #Esp32

6V-60V 1A Buck LED Driver with Hysteretic Control DC and PWM Dimming Control #ultralibrarian

35V Boost PWM Controller with Configurable Frequency Soft Start and Light-Load Operation AEC-Q100 Qualified #ultralibrarian

24-Channel, 12-Bit PWM LED Driver With 7-Bit Dot Correction and 3-Group, 8-Bit Global Brightness Control, HTSSOP-38 led driver HTSSOP*1EP*6.1x12.5mm*P0.65mm*

6V-60V 1A Buck LED Driver with Hysteretic Control DC and PWM Dimming Control #ultralibrarian

Microcontroller – 32-bit Arm® Cortex®-M0+ microcontroller operating at up to 64 MHz, featuring 512 KB Flash memory, 144 KB SRAM, and 30 programmable I/O pins. Operates from a 1.7 V to 3.6 V supply and integrates a 13-channel 12-bit ADC, 2-channel 12-bit DAC, three analog comparators, and communication interfaces including CAN FD, USB 2.0 Full-Speed, USB Type-C® Power Delivery, I²C, SPI, I²S, UART/USART, HDMI-CEC, IrDA, and LIN. Includes DMA, PWM timers, brown-out detect/reset, power-on reset (POR), and watchdog timer (WDT) peripherals. Housed in a 32-pin UFQFPN (5 × 5 mm) package. #STMicroelectronics #STM32 #STM32G0B1KEU6 #Microcontroller #ARMCortexM0Plus #32BitMCU #64MHz #512KBFlash #144KBSRAM #ADC #DAC #CANFD #USB2 #USBTypeC #I2C #SPI #I2S #UART #UFQFPN32 #EmbeddedSystems

WiFi 802.11b/g/n Transceiver Module 2.4GHz ~ 2.5GHz Integrated, Trace Surface Mount The ESP-12F is a compact WiFi module based on the ESP8266EX, widely used in IoT and embedded systems due to its low cost and built-in networking capabilities. Integrated WiFi (2.4 GHz) Supports 802.11 b/g/n Built-in TCP/IP stack (no external WiFi processor needed) Microcontroller + WiFi in one Powered by the ESP8266EX SoC Can run user applications directly (not just a WiFi modem) Flash Memory Typically 4 MB SPI flash (varies by version) GPIO Support Multiple multifunction pins: Digital I/O PWM I2C SPI UART ADC (1 channel) Size: ~16 mm × 24 mm Mounting: Castellated SMD module Antenna: Built-in PCB trace antenna (requires proper keepout zone) Power Requirements Operating Voltage: 3.0V – 3.6V (typical 3.3V) Current Consumption: Idle: ~70 mA Peak (TX): up to ~300 mA Common Interfaces UART – programming and debugging SPI – peripheral communication I2C (software-based) GPIO – general-purpose control #commonpartslibrary #transceiver #module #wireless #rf #wifi

802.15.4, Bluetooth, WiFi Bluetooth v5.0, Zigbee Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C6-WROOM-1-N8 integrates a 32-bit RISC-V single-core processor running up to 160 MHz, along with 8 MB of embedded SPI flash memory. It supports multiple wireless communication protocols, including: Wi-Fi 6 (802.11ax) in the 2.4 GHz band for improved efficiency and lower latency Bluetooth Low Energy (BLE 5) for short-range communication IEEE 802.15.4 for protocols such as Thread and Zigbee The module features a built-in PCB antenna, RF circuitry, crystal oscillator, and passive components, making it a complete solution that simplifies hardware design. It provides a wide range of GPIO pins and peripheral interfaces such as UART, SPI, I2C, PWM, ADC, and more, enabling flexible integration with sensors and external devices. Designed for low power consumption, it includes multiple power-saving modes, making it suitable for battery-powered applications. Typical Applications Smart home and IoT devices Wireless sensors and control systems Industrial automation Smart lighting and energy management Matter-compatible devices (via Thread support)

Sub-GHz Wireless Microcontroller – Ultra-low-power Sub-GHz wireless microcontroller integrating a 64 MHz Arm® Cortex®-M0+ core with an RF transceiver for LPWAN, smart metering, industrial IoT, building automation, asset tracking, and wireless sensor networks. Features 128 KB Flash, 32 KB SRAM, and supports Sub-GHz operation from 413–479 MHz and 826–958 MHz (including regional ISM bands), with up to +20 dBm transmit power, −132 dBm receiver sensitivity, and data rates up to 600 kbps. Supports Sigfox, KNX RF, IEEE 802.15.4g, Mioty, and proprietary wireless protocols using 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, ASK, OOK, DBPSK, and DSSS modulation. Operates from a 1.7 V to 3.6 V supply and includes 17 GPIOs, 12-bit ADC, timers, DMA, SPI, I²C, UART/USART, I²S, IrDA, PWM, watchdog, AES hardware accelerator, true random number generator (TRNG), and low-power wake-up receiver. Specified for operation over a −40°C to +105°C temperature range and housed in a 32-pin VFQFPN (5 × 5 mm) package. #STMicroelectronics #STM32WL33KBV7 #STM32WL33 #SubGHzMCU #WirelessMCU #CortexM0Plus #LPWAN #Sigfox #KNXRF #IEEE802154g #Mioty #IoT #EmbeddedSystems

9-Bit to 13-Bit Digital Contactless Angle Sensor with ABZ and PWM Outputs in an Ultra-Small UTQFN-14 Package #ultralibrarian