LR RF Receiver ASK, OOK 433MHz -112dBm 10kbps Castellation #RF #Receiver #RXM-433

1/1 Transceiver Half RS422, RS485 8-SOIC These devices have robust 3.3-V drivers and receivers in a small package for demanding industrial applications. The bus pins are robust to ESD events with high levels of protection to Human-Body Model and IEC Contact Discharge specifications. Each of these devices combines a differential driver and a differential receiver which operate from a single 3.3-V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. These devices feature a wide common-mode voltage range making the devices suitable for multi-point applications over long cable runs. These devices are characterized from –40°C to 125°C 1• Small-size VSSOP Packages Save Board Space, or SOIC for Drop-in Compatibility • Bus I/O Protection – >±15 kV HBM Protection – >±12 kV IEC 61000-4-2 Contact Discharge – >±4 kV IEC 61000-4-4 Fast Transient Burst • Extended Industrial Temperature Range –40°C to 125°C • Large Receiver Hysteresis (80 mV) for Noise Rejection • Low Unit-Loading Allows Over 200 Connected Nodes • Low Power Consumption – Low Standby Supply Current: < 2 µA – ICC < 1 mA Quiescent During Operation • 5-V Tolerant Logic Inputs Compatible With 3.3-V or 5-V Controllers • Signaling Rate Options Optimized for: 250 kbps, 20 Mbps, 50 Mbps • Glitch Free Power-Up and Power-Down Bus Inputs and Outputs 2 Applications • Factory Automation • Telecommunications Infrastructure • Motion Control #SN65HVD75D #RS485 #RS422 #Transceiver #TexasInstruments #IndustrialCommunication #FactoryAutomation #MotionControl #TelecomInfrastructure #ESDProtection #HalfDuplex #InterfaceIC #EmbeddedSystems #IndustrialElectronics #DataCommunication

1/1 Transceiver Half CANbus 8-SOIC The SN65HVD230DR is a high-speed Controller Area Network (CAN) transceiver designed to interface a CAN protocol controller with the physical two-wire CAN bus. It operates as a differential line driver and receiver, translating logic-level signals into robust bus-level signals suitable for automotive, industrial, and distributed control applications. The device is optimized for reliable communication in electrically noisy environments and supports low-power operation, making it suitable for systems requiring energy efficiency and extended operational stability. This transceiver conforms to widely adopted CAN physical layer standards and is intended for use in systems requiring high data integrity, fault tolerance, and electromagnetic compatibility. It integrates protection features and supports standby functionality to reduce system power consumption when communication is inactive. Functional Overview The device provides bidirectional signal conversion between a CAN controller and the differential CAN bus lines. It features a transmit data input and a receive data output, enabling full-duplex communication at the protocol level. The driver stage generates differential output signals on the bus, while the receiver stage detects and translates bus signals back into logic-level data. An internal control mechanism allows the device to enter a low-power standby mode, reducing current consumption when active communication is not required. The transceiver includes slope control capability to manage signal edge rates, which helps minimize electromagnetic interference and improves signal integrity across the network. Electrical Characteristics The transceiver operates from a single low-voltage supply and is designed for compatibility with modern microcontrollers and digital logic systems. It provides differential output drive capability with controlled rise and fall characteristics. The receiver is designed with high input sensitivity and noise immunity to ensure accurate signal detection under varying bus conditions. The device includes thermal protection and safeguards against bus faults, including short-circuit conditions. Its internal circuitry is designed to maintain stable operation across a wide range of environmental conditions and supply variations. Interface Requirements The logic interface is compatible with standard digital input and output levels, allowing direct connection to a CAN controller. The bus interface consists of two differential lines that connect to the CAN network. Proper termination and layout practices are required to ensure optimal communication performance and compliance with CAN network design guidelines. Operating Conditions The device is intended for operation across a broad temperature range suitable for industrial and automotive environments. It maintains functional integrity under typical voltage fluctuations and environmental stresses encountered in embedded systems. Protection and Reliability Features The transceiver incorporates protection mechanisms to guard against overcurrent, thermal overload, and electrostatic discharge. It is designed to maintain communication reliability even in the presence of transient disturbances and electrical noise. Packaging and Integration The SN65HVD230DR is provided in a compact surface-mount package suitable for automated assembly. Its pin configuration supports straightforward integration into printed circuit board designs with minimal external components. #CommonPartsLibrary #IntegratedCircuits #Interface #Drivers #Receivers #Transceivers #65HVD230

Buffer, Non-Inverting 6 Element 1 Bit per Element Open Drain Output 14-SOIC #CommonPartsLibrary #IntegratedCircuit #Logic #Buffer #Driver #Receiver #Transceiver #74LVC07

IR Receiver Modules for Remote Control Systems #commonpartslibrary #interface #optical #sensor

QwikRadio® RF Receiver ASK, OOK 300MHz ~ 450MHz -112.5dBm 20kbps PCB, Surface Mount 16-QSOP #commonpartslibrary #RF #integratedcircuit

series RF Receiver AM, FM, SW-LW 153kHz ~ 279kHz, 520kHz ~ 1.71MHz, 2.3MHz ~ 26.1MHz, 64MHz ~ 108MHz - - PCB, Surface Mount 24-SSOP #Receiver #AM #FM #SW-LW #commonpartslibrary #RF #integratedcircuit

Remote Receiver Sensor 38.0kHz 25m Through Hole #commonpartslibrary #sensor #Proximitysensor #integratedcircuit

Remote Receiver Sensor 38.0kHz 45m Through Hole #commonpartslibrary #interface #optical #sensor

Remote Receiver Sensor 38.4kHz 35m Through Hole #commonpartslibrary #interface #optical #sensor

series RF Receiver Galileo, GLONASS, GPS 1.575GHz, 1.602GHz -165dBm 400kbps, 20-SMD Module #commonpartslibrary #GPS #RF #integratedcircuit #Navigation

Low Power 165MHz HDMI Receiver, LQFP-64 #commonpartslibrary #Interface #HDMI #integratedcircuit

DTMF receiver with 4 bit output, SOIC-18 #commonpartslibrary #interface #telecom #integratedcircuit

Isolation and Data Interface (Encapsulated) Pulse Transformer 1:1 Transmitter, 1:1 Receiver Surface Mount #commonpartslibrary #transformer

Remote Receiver Sensor 30.0kHz 35m Through Hole #commonpartslibrary #interface #optical #sensor

Remote Receiver Sensor 38.0kHz 45m Through Hole #commonpartslibrary #interface #optical #sensor

Isolated, 1 Channel, 24 to 60V Digital Input Receiver, SOIC-8 isolated digital input SOIC*3.9x4.9mm*P1.27mm*

2/2 Transceiver Full RS232 16-TSSOP #CommonPartsLibrary #IntegratedCircuit #Interface #Driver #Receiver #Transceiver #MAX3232

2/2 Transceiver Full RS232 16-SOIC The MAX3232ECWE+T is a dual-channel RS-232 transceiver manufactured by Analog Devices under the Maxim Integrated product family. This integrated circuit is designed to provide reliable bidirectional communication between TTL or CMOS logic-level devices and RS-232 serial communication interfaces. The device integrates charge-pump voltage converters and line drivers/receivers, enabling full RS-232 signal compliance using a single low-voltage power supply. The transceiver supports high-speed serial data communication while maintaining low power consumption and robust signal integrity. It is widely used in embedded systems, industrial automation equipment, communication interfaces, instrumentation systems, microcontroller platforms, portable electronics, and legacy serial communication applications. The MAX3232ECWE+T enables seamless voltage-level translation between modern low-voltage digital electronics and traditional RS-232 communication standards. Its compact surface-mount package and integrated functionality reduce external component requirements and simplify serial interface implementation in space-constrained electronic systems. Engineering Specification Device Type RS-232 transceiver interface IC Communication Standard RS-232 serial communication interface Channel Configuration Dual driver and dual receiver architecture Logic Compatibility TTL and CMOS logic-level interface support Voltage Conversion Integrated charge-pump voltage generation Data Communication Bidirectional asynchronous serial communication support Signal Characteristics Compliant RS-232 voltage-level transmission and reception Power Characteristics Low-voltage single-supply operation Data Rate Performance High-speed serial communication capability Protection Features Robust communication interface tolerance and stable signal operation Package Type SOIC surface-mount package Mounting Style Surface mount technology Applications Embedded systems Industrial automation Serial communication interfaces Microcontroller systems Instrumentation equipment Portable electronics Communication gateways Legacy serial devices Data acquisition systems RS-232 interface conversion Manufacturer Analog Devices / Maxim Integrated #commonpartslibrary #rs232 #serialcommunication #transceiver #interfaceic #maximintegrated #analogdevices #embeddedhardware #communicationinterfaces #surfaceountcomponents #electronicsdesign #industrialelectronics #microcontroller #datacommunication #signalconversion

The NEO-6M-0-001 is a compact GPS receiver module based on the high-performance u-blox 6 positioning engine. It features a 50-channel GPS receiver with fast satellite acquisition and precise positioning (about ±2.5 m) and supports standard GPS communication protocols like NMEA and u-blox UBX. The module typically operates from 2.7 V to 3.6 V, communicates via UART/SPI/I²C interfaces, and is widely used in navigation, tracking, and embedded projects where reliable global positioning data is needed. #module

CAN Transceiver, up to 5Mbit/s, Silent Mode, VIO #CommonPartsLibrary #IntegratedCircuit #Interface #Driver #Receiver #Transceiver #TJA1051

Wireless Power Receiver PMIC 20-VQFN (3.5x4.5) #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Transceiver, Non-Inverting 1 Element 8 Bit per Element 3-State Output 20-PDIP #CommonPartsLibrary #IntegratedCircuit #Logic #Buffer #Driver #Receiver #Transceiver #74HCT245