Artix-7 Field Programmable Gate Array (FPGA) IC 170 1843200 33280 256-LBGA #CommonPartsLibrary #IntegratedCircuit #Embedded #FPGAs #Artix-7 #XC7A35

100 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold #CommonPartsLibrary #Connector #Array #Edge-Type #Mezzanine #DF40H

Mosfet Array 40V 12W Surface Mount 22-VSON-CLIP (5x6) #CommonPartsLibrary #Transistor #FET #Mosfet #NexFET™ #CSD88584Q5

Mosfet Array 20V 1.03A, 700mA 450mW Surface Mount SOT-563 #CommonPartsLibrary #Transistor #FET #Mosfet #Mosfet-Array #DMN5L06

iCE40 UltraPlus™ Field Programmable Gate Array (FPGA) IC 39 1171456 5280 48-VFQFN Exposed Pad #commonpartslibrary #integratedcircuit #ice40

Mosfet Array N and P-Channel 20V 6.6A, 5.3A 2W Surface Mount 8-SOIC

ECP5 Field Programmable Gate Array (FPGA) IC 197 1990656 44000 256-LFBGA #CommonPartsLibrary #IntegratedCircuit #Embedded #FPGAs #ECP5 #LFE5U-45

Diode Array 1 Pair Common Cathode 100V 10A Through Hole TO-220-3 #CommonPartLibrary #Diode #Rectifier #DiodeArray

400 Position Connector Array, Female Sockets Surface Mount Gold #CommonPartsLibrary #Connector

Shielded 2 Coil Inductor Array 89.44 µH Inductance - Connected in Series 22.36 µH Inductance - Connected in Parallel 39.6mOhm DC Resistance (DCR) - Parallel 3.7 A Nonstandard #commonpartslibrary #inductor

Diode Array 1 Pair Common Cathode 60 V 10A Through Hole TO-220-3 Full Pack, Isolated Tab #CommonPartsLibrary #Diode #Rectifier #Diode-Array

30 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold #Commonpartslibrary #Connector #Array #Edgetype #Boardtoboard #Interconnects

Cyclone® IV E Field Programmable Gate Array (FPGA) IC 153 608256 22320 256-LBGA #CommonPartsLibrary #IntegratedCircuit #Embedded #FPGAs #EP4CE22

Bipolar (BJT) Transistor Array 2 NPN (Dual) 40V 600mA 300MHz 150mW Surface Mount SC-88/SC70-6/SOT-363 #CommonPartsLibrary #Transistors #Bipolar(BJT) #DualNPN #BipolarTransistorArrays

SDRAM Memory IC 512Mbit Parallel 143 MHz 5.4 ns 54-TSOP II The AS4C32M16SB-7TCN is a single-data-rate synchronous dynamic random-access memory (SDR SDRAM) device manufactured by Alliance Memory. It is organized internally as a multi-bank array, allowing concurrent access operations across banks to improve effective memory bandwidth compared to simpler asynchronous DRAM architectures. The device is intended for general-purpose embedded memory applications where a synchronous, clock-driven memory interface is required, including embedded systems, industrial controllers, consumer electronics, networking equipment, and other designs that rely on a parallel SDRAM interface for working memory or buffering. As a drop-in style component within Alliance Memory's broader memory portfolio, this part is designed to be pin- and function-compatible with legacy SDR SDRAM devices originally offered by other manufacturers, allowing designers to source a continued-availability alternative for designs that depend on this memory architecture even as some original suppliers have discontinued production. This makes the device particularly useful in long-lifecycle industrial, embedded, and legacy system designs where a guaranteed supply of a specific memory interface and timing profile is critical to sustaining production over many years. The "B" designation in the part family indicates a specific die revision within the AS4C32M16S product line, reflecting a particular generation of internal silicon design while maintaining functional and pinout compatibility with related die revisions in the same footprint. The device communicates over a standard synchronous SDRAM command interface, using a clock-synchronized protocol for row and column addressing, data burst transfers, and bank management, and it supports the auto-refresh and self-refresh mechanisms typical of SDRAM devices to maintain stored data integrity without requiring constant external refresh management by the host controller. Mechanically, the device is housed in a thin small-outline package suited to space-constrained PCB layouts, and it is built for standard surface-mount assembly processes. The "-7TCN" suffix on this part number reflects a specific speed grade, package style, and temperature grade combination within the product family, with this particular variant intended for commercial temperature range operation. The device is supplied in tray packaging for surface-mount assembly and is compliant with RoHS material restrictions, supporting standard environmental and regulatory requirements for electronic components. Spec Sheet Identification Part Number: AS4C32M16SB-7TCN Device Family: AS4C32M16SB Manufacturer: Alliance Memory, Inc. Die Revision: B-die Functional Classification Device Type: Synchronous DRAM (SDR SDRAM) Memory Organization: Multi-bank array architecture Interface Type: Parallel, clock-synchronous command interface Refresh Capability: Supports auto-refresh and self-refresh modes Electrical Characteristics Supply Voltage: Standard 3.3V-class SDRAM supply rating Clock Frequency: Mid-range SDR SDRAM clock speed class Access Timing: Standard SDR SDRAM access time class for its speed grade Environmental & Qualification Temperature Grade: Commercial ("C" suffix designation) RoHS Compliance: Yes Product Positioning: Long-lifecycle, drop-in replacement memory device Package Package Type: Thin Small Outline Package, TSOP-II style Mounting: Surface mount technology (SMT) Packaging Format Supply Format: Tray packaging #AS4C32M16SB #AllianceMemory #SDRAM #SDRSDRAM #MemoryIC #EmbeddedMemory #TSOP #SurfaceMount #LegacyMemory #DropInReplacement #DRAM #EmbeddedSystems #IndustrialElectronics #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #MemoryComponent #PCBDesign #CommonPartsLibrary #IntegratedCircuit #Memory #AS4C32

Spartan®-7 Field Programmable Gate Array (FPGA) IC 100 184320 6000 225-LFBGA, CSPBGA #commonpartslibrary #integratedcircuit #fpga #spartan

100 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold The DF40C-100DS-0.4V(51) is a board-to-board and board-to-FPC receptacle connector manufactured by Hirose Electric. It belongs to the DF40 series, a family of fine-pitch stacking connectors intended for compact, high-density interconnect applications such as mobile devices, cameras, wearables, and other space-constrained electronics. The connector functions as the receptacle (socket) half of a mating pair, designed to stack with a corresponding DF40 plug header to join two printed circuit boards, or a printed circuit board and a flexible printed circuit, in a low-profile vertical arrangement. This particular part number represents the full-position, low-profile variant within the series, configured without a reinforcing metal fitting and without a locating boss or mechanical holddown feature, meaning it relies on the contact array itself rather than additional structural hardware for mechanical retention during reflow and handling. The connector is supplied in straight, surface-mount form and is non-polarized, so it can be inserted in either orientation relative to its mating counterpart. Contacts are arranged in parallel rows along the connector body, with gold plating in the contact mating area to ensure reliable signal continuity and resistance to oxidation over repeated use. The series is positioned by Hirose as a general-purpose, high-speed-capable interconnect, suitable for a range of differential and single-ended signaling standards used in consumer and industrial electronics, with the broader DF40 family supporting interfaces such as USB, MIPI, SATA, and PCIe. Its low stacking height and fine contact pitch make it well suited to applications where board-to-board spacing must be minimized, such as camera modules, display modules, or stacked daughterboard architectures in handheld and wearable products. The connector is packaged on embossed carrier tape for automated pick-and-place assembly, and its construction is compliant with RoHS material restrictions. Mechanically, the connector body is built to support repeated mating cycles typical of consumer electronics assembly and rework, while maintaining stable electrical contact under vibration and thermal cycling across its rated environmental range. As a stacking-style connector rather than a card-edge or cable-mount type, it is intended to be soldered directly to a host PCB pad pattern, with the mating plug soldered to the corresponding board or FPC, allowing the two assemblies to be joined and separated as needed during manufacturing, test, or service operations. Spec Sheet Identification Part Number: DF40C-100DS-0.4V(51) Series: DF40 Variant: "C" type — without reinforcing metal fitting Connector Type / Configuration Type: Receptacle (socket), board-to-board / board-to-FPC Gender: Female Orientation: Straight Row Arrangement: Dual row Polarization: Non-polarized Locking/Retention Feature: None (no metal holddown or locating boss) Electrical Ratings Current Rating: Low-current signal class Voltage Rating: Standard signal-level rating typical of fine-pitch board-to-board connectors Applicable High-Speed Protocols: USB, MIPI, SATA, PCIe (series capability) Transmission Rate: High-speed, multi-gigabit class (series capability) Mechanical Specifications Contact Pitch: Fine pitch Mounting Pitch: Matches contact pitch Stacking/Mated Height: Low-profile Mounting Method: Surface mount technology (SMT) Mating Cycles: Rated for repeated mate/unmate cycles typical of consumer electronics rework Contact & Material Properties Contact Material: Phosphor bronze Contact Plating (Mating Area): Gold Insulator Color: Black Insulator Material: High-temperature engineering resin suitable for SMT reflow Environmental Ratings Operating Temperature Range: Extended consumer/industrial range RoHS Compliance: Yes Packaging Packaging Format: Embossed carrier tape, reel format Packaging Code Meaning: Suffix denotes embossed tape packaging at a standard reel quantity Mating Compatibility Mates With: Corresponding DF40 series plug/header connector Application Note: Intended for mezzanine-style stacking between two PCBs or between a PCB and FPC #DF40 #Hirose #HiroseElectric #BoardToBoard #BoardToFPC #StackingConnector #CommonPartsLibrary #Connector #SMTConnector #FinePitchConnector #MezzanineConnector #ElectronicComponents #PCBDesign #HardwareEngineering #ConnectorDatasheet #EngineeringSpec #ConsumerElectronics #HighSpeedConnector #RoHSCompliant #ComponentLibrary

ARM® Cortex®-M33 RT-600 Microcontroller IC 32-Bit Dual-Core 300MHz External Program Memory 176-VFBGA (9x9) The RT600 is a family of dual-core microcontrollers for embedded applications featuring an Arm Cortex-M33 CPU combined with a Cadence Xtensa HiFi4 advanced Audio Digital Signal Processor CPU. The Cortex-M33 includes two hardware coprocessors providing enhanced performance for an array of complex algorithms. The family offers a rich set of peripherals and very low power consumption. The Arm Cortex-M33 is a next generation core based on the ARMv8-M architecture that offers system enhancements, such as ARM TrustZone® security, single-cycle digital signal processing, and a tightly-coupled coprocessor interface, combined with low power consumption, enhanced debug features, and a high level of support block integration. The ARM Cortex-M33 CPU employs a 3-stage instruction pipe and includes an internal prefetch unit that supports speculative branching. A hardware floating-point processor is integrated into the core. On the RT600, the Cortex-M33 is augmented with two hardware coprocessors providing accelerated support for additional DSP algorithms and cryptography. The Cadence Xtensa HiFi 4 Audio DSP engine is a highly optimized audio processor designed especially for efficient execution of audio and voice codecs and pre- and post-processing modules. It supports four 32x32-bit MACs, some support for 72-bit accumulators, limited ability to support eight 32x16-bit MACs, and the ability to issue two 64-bit loads per cycle. There is a floating point unit providing up to four single-precision IEEE floating point MACs per cycle. The RT600 provides up to 4.5 MB of on-chip SRAM (plus an additional 128 KB of tightly-coupled HiFi4 ram) and several high-bandwidth interfaces to access off-chip flash. The FlexSPI flash interface supports two channels and includes an 32 KB cache and an on-the-fly decryption engine. The RT600 is designed to allow the CortexM33 to operate at frequencies of up to 300 MHz and the HiFi4 DSP to operate at frequencies of up to 600 MHz. Key Features Dual-core architecture with Arm Cortex-M33 CPU and Cadence Xtensa HiFi4 DSP Cortex-M33 operating at up to 300 MHz HiFi4 DSP operating at up to 600 MHz Up to 4.5 MB on-chip SRAM 128 KB DSP tightly coupled memory (TCM) FlexSPI interface supporting Quad/Octal SPI Flash with execute-in-place (XIP) High-speed USB 2.0 Host/Device with integrated PHY Digital microphone (DMIC) interface supporting up to 8 channels Multiple I2S, SPI, I²C, UART, SDIO, and I3C interfaces 12-bit ADC with up to 1 MSPS sampling rate Hardware cryptography acceleration (AES, SHA, RSA, ECC) Arm TrustZone® security technology Secure boot and physically unclonable function (PUF) key storage Multiple low-power operating modes for battery-powered applications Up to 147 GPIOs depending on package option 176-pin VFBGA package (9 mm × 9 mm) Typical Applications Voice-controlled smart devices Audio processing and DSP systems Smart speakers and soundbars Industrial HMI and control panels Edge AI and machine learning applications IoT gateways and connected devices Wearable and portable electronics #NXP #iMXRT685 #RT600 #CortexM33 #HiFi4DSP #Microcontroller #EmbeddedSystems #EdgeAI #VoiceRecognition #AudioProcessing #IoT #IndustrialAutomation #SecureMCU #MachineLearning #MCUDesign

EEPROM Memory IC 256Kbit I2C 1 MHz 450 ns 8-SO The M24256E-FMN6TP is a 256-Kbit (32 Kbyte) I²C-compatible serial EEPROM from STMicroelectronics. It is designed for reliable, non-volatile data storage in a wide range of electronic applications including consumer, industrial, and automotive systems. The device supports standard (100 kHz), fast (400 kHz), and fast-mode plus (1 MHz) I²C communication, enabling efficient data transfer. It features byte and page write operations, low power consumption, and a high endurance of write cycles, making it suitable for frequent data logging and configuration storage. Housed in a compact SO8 package, the device is optimized for space-constrained PCB designs while maintaining robust performance and data retention capabilities. Key Features Memory size: 256 Kbit (32 Kbyte) Interface: I²C (2-wire serial interface) Clock frequency: Standard mode: 100 kHz Fast mode: 400 kHz Fast-mode Plus: 1 MHz Supply voltage range: 1.7 V to 5.5 V Page write capability: up to 64 bytes Write cycle time: ~5 ms (typical) Data retention: > 200 years Endurance: > 4 million write cycles Hardware write protection available ESD protection and latch-up immunity Functional Description The device operates as a slave on the I²C bus and supports: Byte write and read Page write (up to 64 bytes) Random and sequential read operations Memory addressing is internally managed using a 16-bit address pointer, allowing access to the full 32 KB memory array. The device includes an internal write cycle controller, eliminating the need for external timing management. Pin Configuration (SO8 Package) A0, A1, A2: Device address inputs VSS: Ground SDA: Serial data line SCL: Serial clock line WC: Write control (hardware write protection) VCC: Supply voltage Absolute Maximum Ratings Supply voltage (VCC): -0.3 V to 6.5 V Input voltage: -0.3 V to VCC + 0.6 V Storage temperature: -65°C to +150°C Operating temperature (industrial grade): -40°C to +85°C Electrical Characteristics Low standby current: < 1 µA (typical) Operating current: < 1 mA Input/output compatible with CMOS logic levels Schmitt trigger inputs for noise immunity Timing Characteristics Write cycle time: 5 ms (typical) Fast-mode Plus support up to 1 MHz Sequential read supports continuous data streaming Package Information Package type: SO8 (8-lead Small Outline) Mounting: Surface-mount (SMD) Tape & reel packaging (TP suffix) Applications Configuration storage Calibration data storage Data logging systems Industrial control systems Consumer electronics Embedded systems requiring non-volatile memory Advantages High endurance and long data retention Wide voltage range (ideal for mixed-voltage systems) Compact footprint High-speed I²C compatibility (up to 1 MHz) #commonpartslibrary #integratedcircuit #memory

160 Position Connector High Density Array, Female Surface Mount Gold #CommonPartsLibrary #Connector #Interconnect #Rectangular-Connector #Array #Edge-Type #Mezzanine #SEARAY™ SEAF #SEAF-20

Bourns Isolated Resistor Array 10k +/-2% 4 Resistors, 1W Total, SIP package 4600X Through Hole #CommonPartsLibrary #Resistor #Resistor-array #4600X

Thermal Image Sensor 32H x 24V TO-39 # MLX90640ESF-BAB-000-TU Engineering Specifications **General Description** The MLX90640ESF-BAB-000-TU is a contactless infrared thermal imaging sensor manufactured by Melexis. It incorporates a microbolometer array that detects infrared radiation emitted by objects and converts the captured thermal energy into temperature data, enabling the creation of thermal images without physical contact. The device is designed for compact and cost-effective thermal imaging applications, offering high thermal sensitivity and accurate temperature measurement capabilities. It integrates a digital signal-processing engine, calibration data memory, and a digital communication interface, allowing direct connection to microcontrollers, embedded systems, and industrial monitoring equipment. The sensor provides real-time thermal mapping across its field of view and is suitable for applications involving human presence detection, predictive maintenance, industrial automation, smart building systems, medical screening, consumer electronics, robotics, and thermal monitoring solutions. Its factory calibration ensures stable performance throughout its operating life while minimizing external calibration requirements. **Engineering Specifications** **Manufacturer:** Melexis **Manufacturer Part Number:** MLX90640ESF-BAB-000-TU **Component Type:** Infrared thermal imaging sensor **Sensor Technology:** Microbolometer thermal sensor array **Measurement Method:** Non-contact infrared temperature sensing **Output Type:** Digital thermal image data **Communication Interface:** I²C-compatible serial interface **Temperature Measurement Capability:** Object temperature monitoring and thermal imaging **Thermal Imaging Function:** Real-time thermal map generation **Integrated Processing:** On-chip signal processing and calibration management **Calibration:** Factory calibrated with stored calibration parameters **Power Supply Configuration:** Single-supply operation **Power Consumption:** Optimized for low-power embedded applications **Refresh Rate:** Programmable thermal frame refresh operation **Thermal Sensitivity:** High-sensitivity infrared detection **Field of View Variant:** Wide-angle thermal imaging configuration **Accuracy Characteristics:** High-precision temperature measurement with integrated compensation algorithms **Memory Features:** Internal EEPROM for calibration coefficients **Operating Mode:** Continuous and programmable thermal acquisition **Data Output Format:** Digital temperature and thermal pixel information **Environmental Stability:** Designed for reliable operation across varying ambient conditions **Electromagnetic Compatibility:** Suitable for embedded and industrial electronic systems **Package Type:** Surface-mount package with infrared-transparent window **Mounting Style:** Surface mount technology **Package Construction:** Reflow-solderable assembly **Lead Finish:** Lead-free finish **Environmental Compliance:** RoHS compliant and halogen-free **Reliability Features:** Factory-tested and production-calibrated thermal imaging device **Typical Applications** Thermal cameras Human presence detection systems Occupancy monitoring Industrial predictive maintenance Electrical equipment inspection Smart building automation HVAC monitoring systems Medical screening devices Consumer electronics Robotics and autonomous systems Fire detection and prevention systems Industrial process monitoring Energy management systems Automotive thermal sensing applications Security and surveillance equipment #MLX90640 #MLX90640ESF #Melexis #ThermalSensor #InfraredSensor #ThermalImaging #Microbolometer #TemperatureSensor #IndustrialAutomation #EmbeddedSystems #IoT #PredictiveMaintenance #SmartBuilding #ThermalCamera #ElectronicComponents #EngineeringSpecifications

Spartan®-6 LX Field Programmable Gate Array (FPGA) IC 102 589824 9152 144-LQFP #commonpartslibrary #integratedcircuit #spartan #fpga

Low Capacitance TVS Diode Array, 2 Channels, SOT-23-6 ESD Protection TVS High-speed USB SOT?23*