Hirose DF17 Series, 0.5mm Pitch 20 Way 2 Row Straight PCB Header, Solder Termination, 0.3A 20 Position Connector Header, Outer Shroud Contacts Surface Mount Gold #CommonPartsLibrary #Connector #Rectangular-Connector #Array #Edge-Type #Mezzanine #DF17(4.0)

Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 6V 10A 6V - 20V Input The LMZ22010TZ/NOPB is a compact, high-efficiency step-down (buck) DC-DC power module from Texas Instruments. It integrates a switching regulator, power MOSFETs, inductor, and compensation components into a single package, simplifying power supply design. This module is capable of delivering up to 10A output current with excellent thermal performance and minimal external components. It is intended for high power density applications such as industrial systems, telecommunications equipment, and embedded processing platforms. Manufacturer Information Manufacturer: Texas Instruments Part Number: LMZ22010TZ/NOPB Product Type: DC-DC Buck Power Module Key Features Integrated power module with inductor and controller Output current up to 10A Wide input voltage range High efficiency operation Adjustable output voltage Built-in protection features (thermal shutdown, overcurrent protection) Power-good output and enable control Requires minimal external components Electrical Characteristics Parameter Value Input Voltage Range 6 V to 20 V Output Voltage Range 0.8 V to 6 V (adjustable) Output Current Up to 10 A Switching Frequency ~500 kHz Efficiency Up to ~95% Operating Temperature Range -40°C to +125°C Package Information Package Type: TO-PMOD (Power Module) Mounting Type: Surface Mount Integrated inductor and power components Optimized for thermal performance Pin Configuration (Typical) Pin Name Description VIN Input supply voltage VOUT Regulated output voltage GND Ground EN Enable input FB Feedback for output adjustment PGOOD Power-good indicator Typical Applications Industrial automation systems Telecom and networking equipment FPGA / DSP / processor power rails Embedded systems Point-of-load regulation Design Considerations Ensure proper PCB layout for heat dissipation Use appropriate input/output capacitors External resistors required to set output voltage Consider airflow for high-current operation #commonpartslibrary #powersupply #dcdc #converter

WiFi 802.11b/g/n Transceiver Module 2.412GHz ~ 2.484GHz PCB Trace Surface Mount

Connector Header Through Hole 10 position 0.050" pin header 2x5 1.27mm The Harwin M50-3500542 is a 1.27 mm pitch (0.05") 2×5 male pin header from the Harwin Archer M50 series, designed for board-to-board or cable-to-board interconnections. It is a through-hole, vertical PCB connector commonly used in embedded systems, debug interfaces (SWD/JTAG), and compact electronics where high-density signal routing is required. This connector provides a reliable low-profile interconnect solution with gold-plated contacts for good signal integrity and durability in industrial environments. Key Features Connector Type 2×5 (10-position) male pin header Dual-row configuration Pitch 1.27 mm (0.05") fine pitch for high-density PCB layouts Mounting Type Through-hole vertical PCB mount Contact Type Male square pins (0.4 mm typical) Electrical Rating Up to 1A per contact Contact Plating Gold plated mating area Tin plated tail for soldering Operating Temperature -40 °C to +105 °C Housing Material High-temperature thermoplastic (UL94 V-0 rated) Stacking / Mating Heights Multiple height options (approx. 3.2 mm to 6.2 mm) for flexible board stacking Compact Design Designed for high-density embedded PCB layouts Typical Applications ARM Cortex SWD / JTAG debug headers Embedded development boards Board-to-board mezzanine connections Industrial control electronics Compact IoT and MCU systems #CommonPartsLibrary #Connector #Header

Dip Switch SPST 2 Position Surface Mount Slide (Standard) Actuator 25mA 24VDC The 218-2LPSTJ is a two-position pluggable terminal block connector designed for secure wire-to-board connections in industrial and commercial electronic applications. It features a screw-clamp termination mechanism, allowing reliable and reusable connections for solid or stranded wires. The connector is typically used in power distribution, control systems, and signal wiring where ease of maintenance and field wiring is required. Key Features Pluggable terminal block, two positions Screw-clamp wire termination for secure connection Standard pitch suitable for common PCB layouts Removable plug for easy installation and maintenance Designed for solid and stranded wire compatibility High reliability for industrial environments Mechanical Specifications Number of Positions: 2 Pitch: 5.08 mm Mounting Type: Through-hole (header) with mating plug Wire Entry: Side entry Wire Gauge Range: Typically 24 AWG to 12 AWG (manufacturer dependent) Housing Material: High-temperature thermoplastic Color: Typically green Electrical Specifications Rated Voltage: Up to 300 V (UL rating typical) Rated Current: Up to 10–15 A (depending on wire size and conditions) Contact Resistance: Low resistance, suitable for power and signal transmission Insulation Resistance: High insulation resistance under standard conditions Environmental Specifications Operating Temperature Range: −40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Power supply connections Industrial control systems HVAC equipment Automation and instrumentation PCB-based terminal interfaces Mating / Compatibility Compatible with corresponding 2-position pluggable terminal block headers with 5.08 mm pitch Designed for repeated mating cycles without degradation #commonpartslibrary #switch #dip #spst

2 Position Wire to Board Terminal Block Horizontal with Board 0.236" (6.00mm) Surface Mount 2061-602/998-404 is a 2-position surface-mount (SMT) PCB terminal block from WAGO's 2061 Series, designed for reliable wire-to-board power and signal connections. It utilizes WAGO's Push-button CAGE CLAMP® spring connection technology, allowing fast, tool-assisted wire insertion and secure vibration-resistant termination without screws. Its compact low-profile design makes it suitable for LED lighting, industrial controls, building automation, and space-constrained electronic assemblies. Key Features 2-position wire-to-board terminal block Surface-mount (SMT) PCB mounting Push-button CAGE CLAMP® spring termination (screwless) 6.00 mm pitch Supports 16–20 AWG (0.5–1.5 mm²) wire Rated up to 10 A (application dependent) Rated voltage up to 300 V (UL) / 630 V (IEC) Horizontal wire entry Tin-plated copper alloy contacts for excellent conductivity Operating temperature: -60°C to +105°C Glass-filled PPA housing with high mechanical strength Ideal for LED lighting, industrial automation, power distribution, and compact PCB applications. #WAGO #TerminalBlock #WireToBoard #SMT #PushButton #CAGECLAMP #PCBConnector #LightingConnector #IndustrialAutomation #PowerConnection

Bipolar (BJT) Transistor Array 2 PNP (Dual) Matched Pair 65V 100mA 175MHz 380mW Surface Mount 6-TSOP The BCM856DS,115 is a dual matched PNP bipolar junction transistor (BJT) housed in a compact SOT-363 (SC-88) 6-pin surface-mount package. It consists of two independent PNP transistors with closely matched electrical characteristics, making it suitable for differential amplifier stages, current mirrors, and signal processing applications where symmetry and thermal tracking are important. Key Features Dual PNP transistor configuration in a single package Matched transistor pair for improved circuit stability Low collector-emitter saturation voltage High current gain consistency between channels Compact SOT-363 (SC-88) package for space-constrained designs Suitable for low-power and signal-level applications Electrical Characteristics (typical values unless otherwise noted) Collector-Emitter Voltage (VCEO): -45 V Collector-Base Voltage (VCBO): -50 V Emitter-Base Voltage (VEBO): -5 V Continuous Collector Current (IC): -100 mA per transistor Power Dissipation (Ptot): ~250 mW total DC Current Gain (hFE): 100 to 300 Transition Frequency (fT): ~100 MHz Package Information Package Type: SOT-363 (SC-88) Mounting: Surface Mount Pin Count: 6 Configuration: Dual PNP (E1, B1, C2, E2, B2, C1 pin arrangement depending on layout) Applications Differential amplifier input stages Current mirror circuits Signal amplification Analog front-end designs Matched pair transistor applications Additional Notes The two transistors are thermally coupled within the same package, improving matching over temperature variations Ideal for precision analog circuits requiring closely matched transistor characteristics Commonly used in compact and high-density PCB layouts #commonpartslibrary #transistor #bjt #pnp

Audio D/A Converter ICs SABRE 8 Channel Smart DAC with Line Drivers, ASP2, 7mmx7mm, 48-QFN The ES9082Q is a high-performance stereo digital-to-analog converter (DAC) developed by ESS Technology for premium audio applications requiring exceptional sound quality, low power consumption, and compact integration. It utilizes the patented HyperStream® architecture and Time Domain Jitter Eliminator technology to deliver highly accurate audio reproduction with ultra-low distortion and noise characteristics. The device supports high-resolution PCM and DSD audio formats, making it suitable for portable audio devices, USB DACs, digital media players, automotive infotainment systems, wireless audio products, and professional audio equipment. The ES9082Q integrates advanced digital filtering, low-jitter clock management, and flexible audio interface support while maintaining efficient power operation for battery-powered applications. Designed for compact embedded audio systems, the ES9082Q provides excellent dynamic range and signal fidelity while minimizing external component requirements. Its architecture enables high-quality playback performance across a wide range of consumer and industrial audio applications. Electrical Characteristics Supply voltage supports low-voltage digital and analog power domains optimized for portable and embedded applications. The device operates with low power consumption while maintaining high audio performance. Integrated power management supports efficient system-level implementation. Audio Performance The converter supports high-resolution stereo audio output with advanced oversampling and noise shaping technology. It delivers ultra-low total harmonic distortion plus noise performance and high dynamic range suitable for high-fidelity audio playback systems. PCM audio data rates support standard and high-resolution formats up to 32-bit depth with sampling frequencies extending to high-definition audio ranges. Native DSD playback capability is also supported for audiophile-grade applications. Digital Audio Interface The ES9082Q supports industry-standard serial audio interfaces including I²S, left-justified, and related digital audio communication protocols. Flexible master and slave clocking configurations enable compatibility with a wide variety of host processors and audio controllers. Integrated jitter suppression circuitry improves clock stability and minimizes timing-induced audio artifacts. Integrated Features The device incorporates digital interpolation filters, volume control functions, soft mute capability, and programmable audio processing features. Internal PLL and clock management circuitry reduce external timing component requirements. Built-in low-noise analog output stages simplify audio signal chain design and reduce overall PCB footprint. Package Information The ES9082Q is provided in a compact surface-mount package optimized for space-constrained audio products. The package supports automated assembly and high-density PCB layouts commonly used in portable and embedded systems. Typical Applications Applications include portable audio players, USB DAC modules, wireless speakers, automotive audio systems, headphones, digital amplifiers, embedded multimedia devices, smart home audio equipment, and professional audio playback systems. #commonpartslibrary #integratedcircuit #audioic #dac #stereodac #esstechnology #es9082q #highresolutionaudio #audiophile #digitalaudio #analogaudio #i2s #dsd #pcm #embeddedaudio #consumerelectronics #portableaudio #usbdac #hifi #signalprocessing #lownoise #lowdistortion #electronicsdesign #pcbdesign #hardwareengineering #electroniccomponents #semiconductor #mixedsignal #audioelectronics #soundquality

10 µH Shielded Drum Core, Wirewound Inductor 7.5 A 30mOhm Max Nonstandard # Engineering Specification ## Product Name SRP1038A-100M ## General Description SRP1038A-100M is a shielded surface mount power inductor designed for use in high-efficiency DC-DC conversion and power management applications. The device is intended to support energy storage and current smoothing functions in switching regulator circuits, where stable inductance performance and low power loss are critical. The inductor utilizes a ferrite core construction with a shielded magnetic structure to minimize electromagnetic interference and reduce magnetic flux leakage. This enables improved circuit density and reduced noise coupling in compact electronic assemblies. The design is optimized for use in high current power conversion systems, including buck converters, point-of-load regulators, and distributed power architectures. The component is widely used in industrial, automotive, telecommunications, and embedded systems where reliable energy transfer, thermal stability, and efficient power delivery are required. Its surface mount form factor supports automated PCB assembly and compact system integration while maintaining mechanical robustness under thermal and electrical stress. The design emphasizes low direct current resistance, high current handling capability, and stable inductance behavior under load conditions. It is suitable for applications requiring efficient power conversion with minimal energy loss and stable electromagnetic performance. ## Functional Requirements ### Energy Storage The device shall store energy in a magnetic field during switching operation in power conversion circuits. ### Current Filtering The device shall smooth current ripple in switching regulator applications to maintain stable output conditions. ### Electromagnetic Shielding The device shall reduce electromagnetic interference through a shielded magnetic structure. ### Power Conversion Support The component shall support efficient operation in DC-DC conversion systems. ## Electrical Requirements ### Inductive Performance The device shall provide stable inductance characteristics suitable for power conversion and filtering applications. ### Low Loss Operation The inductor shall minimize resistive and core losses to improve overall system efficiency. ### High Current Capability The device shall support operation under elevated current conditions typical of switching power supplies. ### Thermal Stability The inductor shall maintain performance consistency under thermal loading and temperature variation. ## Mechanical Requirements ### Surface Mount Package The device shall be supplied in a surface mount configuration suitable for automated PCB assembly processes. ### Structural Integrity The component shall withstand mechanical stress during assembly, operation, and thermal cycling. ### PCB Integration The design shall support compact layout integration in multilayer printed circuit board systems. ## Environmental Requirements ### Operating Conditions The device shall operate reliably under conditions typical of industrial and embedded electronic systems. ### Thermal Performance The component shall maintain stable operation under continuous power cycling and heat generation. ### Storage and Handling The device shall retain structural and electrical integrity during storage, transportation, and handling. ## Quality Requirements ### Reliability The inductor shall provide consistent long-term performance under continuous electrical and thermal stress. ### Verification Electrical and thermal characteristics shall be validated through appropriate qualification and testing procedures. ### Compliance The product shall conform to applicable standards for magnetic components used in power electronics applications. ## Documentation Requirements Technical documentation shall include application guidance, layout recommendations for switching power designs, thermal considerations, electrical characteristics, and integration practices for DC-DC converter systems. ## Classification Tags #SRP1038A100M #PowerInductor #ShieldedInductor #SMDInductor #MagneticComponent #EnergyStorageInductor #DCDCConverter #BuckConverter #PowerElectronics #SMPSDesign #ElectromagneticCompatibility #EMIShielding #PCBDesign #ElectricalEngineering #EmbeddedPower #IndustrialElectronics #AutomotiveElectronics #CommonPartsLibrary #ComponentLibrary #EngineeringSpecification #PowerManagement #CircuitDesign #HighCurrentInductor

600 Ohms @ 100 MHz 1 Ferrite Bead 0603 (1608 Metric) ferrite bead 600 ohm 0603 ferrite bead 600 ohm 100MHz 0603 ferrite bead 0603 600ohm The BLM18AG601SN1D is a surface-mount ferrite bead designed for suppression of high-frequency noise in electronic circuits. It provides high impedance at high frequencies while maintaining low DC resistance, making it suitable for power lines and signal line filtering. This component is commonly used in portable electronics, communication devices, and general digital circuits to improve EMI performance. ELECTRICAL CHARACTERISTICS Impedance: 600 Ω ±25% @ 100 MHz Rated Current: 500 mA (max) DC Resistance (DCR): 0.5 Ω (typ), 0.8 Ω (max) Insulation Resistance: 10 MΩ min PHYSICAL CHARACTERISTICS Package Size: 0603 (1608 Metric) Length: 1.6 mm Width: 0.8 mm Height: 0.8 mm (typ) Mounting Type: Surface Mount (SMD) ENVIRONMENTAL & OPERATING CONDITIONS Operating Temperature Range: -55°C to +125°C Storage Temperature Range: -55°C to +125°C APPLICATIONS Power supply line noise suppression Signal line EMI filtering Mobile devices and handheld electronics Computers and peripherals Consumer electronics FEATURES High impedance at high frequencies for effective noise suppression Low DC resistance minimizes signal/power loss Compact 0603 package suitable for high-density PCB layouts Reliable multilayer construction Lead-free and RoHS compliant PACKAGING Packaging Type: Tape and Reel Standard Reel Quantity: Typically 4000 pcs/reel #CommonPartLibrary #Filter #FerriteBead

USB-C (USB TYPE-C) Receptacle Connector 24 Position Panel Mount, Through Hole, Right Angle The MUSBRM1C1M0 is a ruggedized USB Type-C receptacle connector designed for high-reliability data and power connectivity in industrial, embedded, transportation, and harsh-environment applications. The connector features a reversible USB Type-C interface that supports modern high-speed communication protocols while providing robust mechanical durability and secure board-level attachment. Its reinforced construction helps withstand vibration, shock, and repeated mating cycles, making it suitable for demanding applications where reliability and long service life are critical. The device is commonly used in industrial controllers, communication equipment, medical devices, consumer electronics, and next-generation embedded systems requiring compact and versatile connectivity. Engineering Specifications Manufacturer: Amphenol Communications Solutions Part Number: MUSBRM1C1M0 Connector Type: USB Type-C Receptacle Interface Standard: Universal Serial Bus Type-C Connector Gender: Receptacle Mounting Style: Surface Mount Orientation: Right Angle Contact Configuration: USB Type-C Multi-Function Interface Data Support: High-Speed Data Transmission Power Delivery Support: Compatible with USB Power Delivery Architectures Shielding: Integrated EMI Shielding Contact Material: Copper Alloy Contact Finish: Gold-Plated Contact Interface Housing Material: High-Strength Metal Shield Construction Durability: High Mating Cycle Life Environmental Performance: Designed for Industrial Applications Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Embedded Systems, Industrial Automation, Consumer Electronics, Communication Equipment, Medical Devices, IoT Products, Portable Electronics, Data Acquisition Systems Key Features Reversible USB Type-C connection interface Ruggedized mechanical construction High-speed data communication capability Secure PCB mounting design Enhanced resistance to vibration and mechanical stress Integrated shielding for improved electromagnetic compatibility Compact footprint for space-constrained designs Supports modern USB power and data architectures Long operational lifespan with high insertion cycle durability Suitable for industrial and commercial electronic systems #MUSBRM1C1M0 #Amphenol #USBTypeC #USBConnector #TypeCReceptacle #HighSpeedConnectivity #PowerDelivery #IndustrialElectronics #EmbeddedSystems #CommunicationEquipment #IoTDevices #ConsumerElectronics #PCBDesign #ElectronicComponents #SurfaceMount #DataTransmission #USBPD #IndustrialAutomation #MedicalElectronics #ConnectorTechnology

2-Position Vertical Through-Hole Male Pin Header – Single-row unshrouded PCB header designed for board-to-board interconnects, wire-to-board connections, industrial controls, embedded systems, instrumentation, development boards, prototyping, and general-purpose electronic applications. The Würth Elektronik 61300211121 is part of the WR-PHD Series, featuring 2 male pins on a 2.54 mm (0.100") pitch with a vertical through-hole mounting configuration. It utilizes square copper alloy contacts with gold-plated mating surfaces, providing excellent conductivity, corrosion resistance, and long-term reliability. The connector features a 6.00 mm mating pin length, 3.00 mm PCB post length, 11.54 mm overall contact length, push-pull mating, and a UL94 V-0 rated PA6T (Nylon 6T) black insulator. Rated for 3 A and 250 V, it operates over a −40°C to +105°C temperature range, making it ideal for reliable embedded, industrial, and prototyping applications. #WurthElektronik #61300211121 #WRPHD #MaleHeader #PinHeader #ThroughHoleConnector #BoardToBoard #254mmPitch #IndustrialElectronics #EmbeddedSystems #PCBConnector

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Plug Connector 24 Position Board Edge, Surface Mount; Through Hole, Right Angle Global Connector Technology (GCT) USB4155-03-C is a USB Type-C Plug Connector designed for USB 3.2 Gen 2 (USB 3.1 Gen 2 SuperSpeed+) high-speed data applications. It is a right-angle, horizontal SMT connector with a 24-contact configuration, suitable for PCB edge mounting. The connector supports high-speed signal transmission, power delivery, and durable mechanical connection for embedded systems, portable devices, and consumer electronics. Key Features: Connector Type: USB Type-C Plug Connector USB Standard: USB 3.2 Gen 2 / USB 3.1 Gen 2 SuperSpeed+ Number of Contacts: 24 positions Mounting Type: Surface Mount Technology (SMT), right-angle horizontal PCB mounting Data Transfer Rate: Supports high-speed USB 3.2 Gen 2 communication (up to 10 Gbps) Current Rating: Up to 5 A for power delivery applications Voltage Rating: Up to 48 VDC Durability: Rated for approximately 10,000 mating cycles Shielding: Metal shielded housing for EMI protection Contact Finish: Gold-plated contacts for reliable conductivity Operating Temperature: -30°C to +85°C Application: Embedded systems, laptops, tablets, mobile devices, storage devices, and USB-C interface boards Component Classification: Category: Connector / Interconnect Component Subcategory: USB Type-C Connector Not an IC or semiconductor component PCB Footprint Required: Yes Mechanical Part: No (it is an electromechanical connector with soldered electrical terminals) #CommonPartsLibrary #Connector #USBTypeC #USBConnector #USB32Gen2 #USB31Gen2 #SuperSpeedPlus #GCT #BoardMountConnector #SMTConnector #HighSpeedInterface #PCBDesign #ElectronicComponents #InterconnectTechnology