Phototransistors 935nm Side View Radial #CommonPartsLibrary #Sensor #Transducer #Phototransistor #Optical-Sensor #OP550

Optical Sensor Through-Beam 0.079" (2mm) Phototransistor PCB Mount #CommonPartsLibrary #Sensor #Transducer #Optical-Sensor #Photointerrupter #GP1S093

Photodiode TO-46-3 Lens Top Metal Can #CommonPartsLibrary #Sensor #PhotoDiode #Transducer #Optical-Sensor #MTPD1346

Phototransistors 870nm Top View Radial #CommonPartsLibrary #Phototransistor #Radial #Sensor #Transducer #Optical-Sensor #SFH 313

This is a QRE1113 opto-reflective sensor module, using a 47K pull-up resistor (R2) and a 100 Ohm resistor (R1). It includes a 1µF capacitor (C1) for stability and attaches to a JST connector (J1) for easy interfacing. Power is provided via VCC, with the output signal (OPTO_OUT) fed back. #OpticalSensor #industrialSensing #reusable #module #industrialsensing #onsemi #sublayout

Optical Sensor I2C Output Optical heart rate and SpO₂ sensor module that integrates a PIN photodiode, three programmable LED drivers, a low-noise analog front end with a 19-bit ADC, ambient light cancellation, and a 128-word FIFO for optical data acquisition. It operates from a 3.0 V to 5.5 V LED supply, supports an I²C-compatible interface, and is designed for reflective heart rate and pulse oximetry measurements in low-power wearable applications. #OpticalSensor #HeartRateSensor #SpO2Sensor #OpticalModule #BiometricSensor #I2C #AnalogDevices

Phototransistor, NPN, THT-3mm #commonpartslibrary #sensor #Opticalsensor

Silicon NPN Epitaxial Planar Phototransistor #commonpartslibrary #sensor #Opticalsensor

Small Photocell epoxy encapsulated housing #commonpartslibrary #sensor #Opticalsensor

Silicon NPN Epitaxial Planar Phototransistor #commonpartslibrary #sensor #Opticalsensor

Photocells in metal encapsulation for outdoor light sensing applications #commonpartslibrary #sensor #Opticalsensor

Photocells in metal encapsulation for outdoor light sensing applications #commonpartslibrary #sensor #Opticalsensor

VT 93 N2 Photoconductive Cell 48K at 2850K/10lux #commonpartslibrary #sensor #Opticalsensor

Phototransistor, NPN, 35V, 200mA, 0.2W, leaded #commonpartslibrary #sensor #Opticalsensor

Photocells in metal encapsulation for outdoor light sensing applications #commonpartslibrary #sensor #Opticalsensor

Multi-Pixel Photon Counters (MPPC) for precision measurement, Photosensitive area: 3.0 x 3.0 mm, Pixel pitch: 25 μm #commonpartslibrary #sensor #Opticalsensor

Multi-Pixel Photon Counters (MPPC) for precision measurement, Photosensitive area: 3.0 x 3.0 mm, Pixel pitch: 25 μm #commonpartslibrary #sensor #Opticalsensor

Fiber Optic Receiver Optical 3V ~ 5.5V PLR237/T10BK is a low-power, through-hole fiber-optic receiver that converts 650 nm optical NRZ signals into a TTL-compatible digital output. It operates from 3.0–5.5 V and supports data rates up to 25 Mb/s with receiver sensitivity down to −27 dBm. #Photointerrupter #TransmissiveSensor #OpticalSensor #InfraredSensor #Phototransistor #ThroughHole #Everlight #PCBComponent

Reflective Optical Sensor 0.028" (0.7mm) 4-SMD, No Lead #commonpartslibrary #opticalsensor

Photodiode 2-SMD, J-Lead #commonpartslibrary #sensor #Opticalsensor #Photodiode

The ams OSRAM TCS3448 is a highly versatile, multi-purpose spectral light sensor designed to sense the spectral components of ambient light in the visible range. This 14-channel sensor is optimized for applications requiring precise color sensing and ambient light classification, making it ideal for enhancing camera performance through improved color temperature (CCT), automatic white balance (AWB), and exposure time adjustments. The TCS3448 features individual channels covering approximately 380 nm to 1000 nm, including 11 channels centered in the visible spectrum, one near-infrared (NIR) channel, and a clear channel. Additionally, it integrates a flicker detection channel that can automatically flag ambient light flicker at 50/60 Hz and buffer data for calculating other flicker frequencies. The sensor's high-precision optical interference filters are directly deposited on photodiodes embedded in CMOS silicon, ensuring accurate spectral data. With a built-in aperture, programmable digital GPIO, and LED driver, the TCS3448 offers robust control and synchronization capabilities. The device is available in an ultra-low profile package, making it suitable for a wide range of applications, from industrial automation to mobile and wearable devices. Features: 14-channel spectral sensing Visible range coverage (380 nm to 1000 nm) 11 visible spectrum channels Near-infrared (NIR) channel Clear channel Flicker detection up to 1 kHz Integrated aperture for increased accuracy High-precision optical interference filters Programmable digital GPIO LED driver for light source control Serial I²C interface (1.2 V/1.8 V) Ultra-low profile package (3.1 mm x 2 mm x 1 mm) Field of view (FOV) ±40° 0.18 µ process technology Compatible with AS7343 software #CommonPartsLibrary #IntegratedCircuit #Sensor #Transducers #Optical-Sensor #Ambient-Light #IR #UV-Sensor

The onsemi AR2020 is a stacked 1/1.8-inch back side illuminated (BSI) CMOS active-pixel digital image sensor with a pixel array of 5120H x 3840V (5136H x 3856V including border pixels). The AR2020 has enhanced NIR response. It incorporates sophisticated on-chip camera functions such as Wake on Motion (WOM), context switching and multiple subsampling modes. It is programmable through a simple I2C interface and has very low power consumption. The AR2020 digital image sensor features onsemi's breakthrough low-noise CMOS imaging technology. The AR2020 sensor can generate full resolution image at up to 60 frames per second (fps) in 10-bit linear mode. AR2020 can achieve 30 fps in line interleaved high dynamic range (LI-HDR) and enhanced Dynamic Range (eDR) modes. #sensor #Transducer #Optical-Sensor #Image-Sensor #Hyperlux™ LP

MAX30105 Breakout Board Particle Sensor Breakout for optical particle detection and proximity sensing based on the MAX30105 sensor. Operates from a 3.3 V to 5 V supply with onboard voltage regulation and logic-level translation for 1.8 V, 3.3 V, and 5 V I/O compatibility. Communicates via an I²C interface and features red, green, and infrared (IR) LEDs, a photodetector, and an active-low interrupt output. The breakout includes configurable 4.7 kΩ I²C pull-up resistors and an INT pull-up resistor through onboard jumpers. #ParticleSensor #OpticalSensor #MAX30105 #I2C #ProximitySensor #IRSensor #SparkFun #BreakoutBoard

Optical Sensor Ultraviolet (UV) I²C 6-WFDFN #commonpartslibrary #opticalsensor #ultraviolet