Single string LED driver, 3V to 36V input, 4A peak current limit, 200Khz to 2Mhz, SOT23-8 LED driver TSOT?23*

21A High-Efficiency Fully Integrated Synchronous Boost Converter with Configurable Peak Switching Current Limit AEC-Q100 Qualified #ultralibrarian

2.7 - 22V 0.7 - 5A Current Limit Switch with Over-Voltage Clamp and Reverse Blocking #ultralibrarian

USB Charging Port Controller with Current Limit Switch Supporting Type-C 5V and QC 3.0 Modes #ultralibrarian

Current limited power switch, single channel, SOT-23-5 Limit USB Active High SOT?23*

Buck-Boost Switching Regulator IC Positive Adjustable (Fixed) 6.5V (11.5V) 1 Output 6A 22-PowerWFQFN The MAX25239/MAX25240 are small, synchronous, buck-boost converters with integrated H-bridge switches. These ICs provide a fixed-output regulation voltage and an externally adjustable output voltage in the 3V to 20V range with an input voltage above, below, or equal to the output regulation voltage. The ICs have typical 8.2A and 10A input current limit options and can support continuous load currents up to 6A depending on the input-to-output voltage ratio and operating frequency. It also has a wide input voltage range of 2V to 36V. The MAX25239/MAX25240 have three switching frequency options: 2.1MHz, 400kHz, and 200kHz. The 2.1MHz high switching frequency allows small external components and reduced output ripple, and guarantees no AM band interference, while the 400kHz or 200kHz switching frequency offers better efficiency and relieves the power consumption concern. The SYNC input allows three operation modes: skip mode with ultra-low quiescent current, forced fixed-frequency PWM operation, and synchronization to an external clock. The IC also includes spread-spectrum frequency modulation to minimize EMI interference. The MAX25239/MAX25240 feature a power-OK (POK) indicator, undervoltage lockout, overvoltage protection, cycle-by-cycle current limit, and thermal shutdown. The ICs are available in small, 4.25mm x 4.25mm x 0.75mm, 22-pin FC2QFN and 5.00mm x 5.00mm x 0.75mm, 18- pin FCQFN packages. Key Features Wide 2 V to 36 V input voltage range Synchronous buck-boost topology for seamless step-up and step-down conversion Delivers up to 6 A continuous output current Adjustable output voltage from 3 V to 20 V (device variant includes fixed output configuration options) High conversion efficiency with integrated low-RDS(ON) MOSFETs 400 kHz switching frequency with spread-spectrum option for reduced EMI Very low 95 µA quiescent current in standby and 10 µA shutdown current Integrated protection features including overvoltage, short-circuit, thermal shutdown, and undervoltage lockout (UVLO) Power-Good (PGOOD) output for power monitoring AEC-Q100 qualified for automotive applications Operating junction temperature range: −40°C to +150°C Compact 22-pin FC2QFN (4.25 × 4.25 mm) package #MAX25240AFFFVY #AnalogDevices #BuckBoostConverter #DCDCConverter #PowerManagement #AutomotiveElectronics #AECQ100 #SwitchingRegulator #EmbeddedSystems #AutomotivePower

7A 5.5V Load Switch with Configurable Current limit Slew Rate Control and Output Discharge #ultralibrarian

32V 6A Step-Down Converter with Programmable Current Limit and Output Voltage Scaling Control #ultralibrarian

Fully Integrated Synchronous 30W Boost Converter with Pass-through Mode and Programmable Switching Current Limit #ultralibrarian

21A High-Efficiency Fully Integrated Synchronous Boost Converter with Configurable Peak Switching Current Limit AEC-Q100 Qualified #ultralibrarian

21A High-Efficiency Fully Integrated Synchronous Boost Converter with Configurable Current Limit AEC-Q100 Qualified #ultralibrarian

21A High-Efficiency Fully Integrated Synchronous Boost Converter with Configurable Input Current Limit AEC-Q100 Qualified #ultralibrarian

0.5A Current limited power switch, single channel, output discharge, reverse blocking, SOT-23-5 Limit USB Active High SOT?23*

Current Limit Switch and D+/D– ESD Protection for USB Host Port, 0.5A, SOT-23-6 ESD-Protection SOT?23*

dsPIC dsPIC™ 33CK, Functional Safety (FuSa) Microcontroller IC 16-Bit 100MHz 128KB (128K x 8) FLASH 48-UQFN (6x6) 28/36/48/64/80-Pin Digital Signal Controllers with High-Resolution PWM and CAN Flexible Data (CAN FD) perating Conditions • 3.0V to 3.6V, -40°C to +125°C, DC to 100 MIPS • 3.0V to 3.6V, -40°C to +150°C, DC to 70 MIPS Core: 16-Bit dsPIC33CK CPU • 32-256 Kbytes of Program Flash with ECC and 8-24K RAM • Fast 6-Cycle Divide • LiveUpdate • Code Efficient (C and Assembly) Architecture • 40-Bit Wide Accumulators • Single-Cycle (MAC/MPY) with Dual Data Fetch • Single-Cycle, Mixed-Sign MUL Plus Hardware Divide • 32-Bit Multiply Support • Four Sets of Interrupt Context Saving Registers which Include Accumulator and STATUS for Fast Interrupt Handling • Zero Overhead Looping • RAM Memory Built-In Self-Test (MBIST) Clock Management • Internal Oscillator • Programmable PLLs and Oscillator Clock Sources • Reference Clock Output • Fail-Safe Clock Monitor (FSCM) • Fast Wake-up and Start-up • Backup Internal Oscillator Power Management • Low-Power Management Modes (Sleep, Idle, Doze) • Integrated Power-on Reset and Brown-out Reset High-Speed PWM • Eight PWM Pairs • Up to 250 ps PWM Resolution • Dead Time for Rising and Falling Edges • Dead-Time Compensation • Clock Chopping for High-Frequency Operation • PWM Support for: - DC/DC, AC/DC, inverters, PFC, lighting - BLDC, PMSM, ACIM, SRM motors • Fault and Current Limit Inputs • Flexible Trigger Configuration for ADC Triggering Timers/Output Compare/Input Capture • One General Purpose Timer • Peripheral Trigger Generator (PTG): - Up to 15 trigger sources to other peripheral modules - CPU independent state machine-based instruction sequencer • Nine MCCP/SCCP modules which Include Timer, Capture/Compare and PWM: - One MCCP - Eight SCCPs - 16 or 32-bit time base - 16 or 32-bit capture - 4-deep capture buffer • Fully Asynchronous Operation, Available in Sleep Modes

Buck Switching Regulator IC Positive Adjustable (Fixed) 0.8V (3.3V, 5V) 1 Output 4.5A 20-WFQFN Exposed Pad The LM656x5-Q1 are a family of automotive buck converters designed for high efficiency, high-power density, and ultra-low electromagnetic interference (EMI). The converters operate over a wide input voltage range of 3V to 65V (70V transient < 100ms), reducing the need for external input surge protection. The LM656x5-Q1 comes with pin selectable fixed output voltages of 3.3V and 5V or in adjustable configuration. The low EMI operation is enabled with minimized loop inductance and optimized switch node slew rate. A pin-selectable ±5% or ±10% dual-random spread spectrum (DRSS) significantly reduces peak emissions through a combination of triangular and pseudo-random modulation while keeping output voltage ripple very low. The current-mode control architecture with a 30ns typical minimum on-time allows high conversion ratios at high frequencies coupled with a fast transient response and excellent load and line regulation. Features • AEC-Q100 qualified for automotive applications: – Temperature grade 1: –40°C to +125°C, TA • Wide input voltage range: 3V to 65V (70V transient < 100ms) – Meets LV148 / ISO21780 requirements • Designed for low EMI requirements – Facilitates CISPR 25 class 5 compliance – Mode pin configurable ±5% or ±10% dualrandom spread spectrum reducing peak emissions – Enhanced HotRod™ QFN package with symmetrical pinout – Switching frequency from 300kHz to 2.2MHz – Pin-configurable AUTO or FPWM operation – Internal compensation, current limit, and TSD • Low minimum on time: 40ns (maximum) – Enables 36VIN to 3.3VOUT conversion at 2.2MHz • High-efficiency power conversion at all loads – > 94% peak efficiency at 24VIN, 5VOUT, 400kHz – 2.5µA switching input current at no load • High power density – 3.6mm × 2.6mm, wettable flank, 20-pin package – Pin compatible with 36V LM654x0-Q1 – ϴJA = 24.0°C/W (LM65645-Q1EVM) • Create a custom design using the LM656x5-Q1 with the WEBENCH® Power Designer 2 Applications • Advanced driver assistance systems (ADAS) • Automotive infotainment and cluster • Hybrid, electric, and powertrain systems #AutomotiveElectronics #BuckConverter #DCDCConverter #PowerManagement #VoltageRegulator #SynchronousBuck #LowEMI #AECQ100 #TexasInstruments #EmbeddedSystems

Current Limit Switch 5-Input 2-Output, 1.7mA, 10-Pin, VSSOP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #LM5060

The XL6007 regulator is a wide input range, current mode, DC/DC converter which is capable of generating either positive or negative output voltages. It can be configured as either a boost, flyback, SEPIC or inverting converter. The XL6007 built in N-channel power MOSFET and fixed frequency oscillator, current-mode architecture results in stable operation over a wide range of supply and output voltages. The XL6007 regulator is special design for portable electronic equipment.  Wide 3.6V to 24V Input Voltage Range  Positive or Negative Output Voltage Programming with a Single Feedback Pin  Current Mode Control Provides Excellent Transient Response  1.25V reference adjustable version  Fixed 400KHz Switching Frequency  Maximum 2A Switching Current  SW PIN Built in Over Voltage Protection  Excellent line and load regulation  EN PIN TTL shutdown capability  Internal Optimize Power MOSFET  High efficiency up to 90%  Built in Frequency Compensation  Built in Soft-Start Function  Built in Thermal Shutdown Function  Built in Current Limit Function  Available in SOP8 package Applications  Automotive and Industrial Boost / Buck-Boost / Inverting Converters  Portable Electronic Equipment #commonpartslibrary #integratedcircuit

Adjustable current limit high side switch IC, active-high enable, 2.8..5.5V, 0.2..1.7A, 89mOhm Ron, TSOP-6 USB power-distribution ROHM TSOP*6*1.65x3.05mm*P0.95mm*

The 1117 series of adjustable and fixed voltage regulators are designed to provide 1A output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.3V at maximum output current, decreasing at lower load currents. On-chip trimming adjusts the reference voltage to 1%. Current limit is also trimmed, minimizing the stress under overload conditions on both the regulator and power source circuitry. The 1117 devices are pin compatible with other three-terminal SCSI regulators and are offered in the low profile surface mount SOT-223 package, in the TO-220 package and in the TO-252 (DPAK) plastic package. #CommonPartsLibrary #IntegratedCircuit #VoltageRegulator

Integrated Automotive eFuse with Hot-Swap Controller – Automotive-grade integrated electronic fuse (eFuse) and hot-swap controller for power distribution, automotive ECUs, ADAS, industrial automation, servers, SSDs, and embedded power management. Operates from a 2.7 V to 26 V input supply (30 V absolute maximum) and integrates a 2.7 mΩ MOSFET capable of supporting up to 20 A load current with an adjustable current limit from 2 A to 20 A. Features 1.5% accurate load current monitoring, programmable inrush current control, adjustable overvoltage protection (OVP), undervoltage protection (UVP), reverse current blocking with external blocking FET drive, thermal shutdown, short-circuit protection, fault timer, auto-retry or latch-off fault response, and power-good/fault reporting for robust system protection. Specified for operation over a −40°C to +125°C temperature range and housed in a compact 24-pin VQFN (4 × 4 mm) package. #TexasInstruments #TPS259830ONRGER #TPS25983 #eFuse #HotSwapController #PowerManagement #CurrentMonitoring #InrushControl #CircuitProtection #AutomotiveElectronics #VQFN24 #EmbeddedSystems

Automotive Grade. 5.5V 2A Low RDSON Load Switch with Programmable Current Limit #ultralibrarian

5V 0.4A to 5A Current Limit Switch with 5.75V Over-Voltage Clamp #ultralibrarian