Buck Switching Regulator IC Positive Fixed 5V 1 Output 1A SOT-23-6 The LMR50410Y5FQDBVRQ1 (part of the LMR50410-Q1 family from Texas Instruments) is a synchronous step-down (buck) DC-DC converter designed for automotive and industrial power applications. It operates over a wide input voltage range of 4 V to 36 V and can deliver up to 1 A output current, making it suitable for converting higher, unregulated voltages into stable lower voltages (e.g., 5 V or 3.3 V rails). The device integrates power switches, control circuitry, and compensation internally, allowing simple design with minimal external components and a compact PCB footprint. Key Features Power & Performance Wide input voltage range: 4 V to 36 V Output current: up to 1 A High switching frequency: 2.1 MHz (enables small inductors) High efficiency with PFM (light load) and FPWM (constant frequency) options Integration & Ease of Use Synchronous rectification (integrated high-side & low-side MOSFETs) Internal compensation (no complex external tuning) Minimal external components required Small SOT-23-6 package for compact designs Protection & Reliability Cycle-by-cycle current limit Short-circuit protection (hiccup mode) Thermal shutdown protection Undervoltage lockout (UVLO) ±1% reference voltage accuracy Automotive & Industrial Capability AEC-Q100 qualified (automotive grade) Operating temperature: Ambient: up to 125°C Junction: up to 150°C Designed for rugged automotive environments Additional Features Soft-start for controlled startup Precision enable pin for system control Monotonic startup with pre-biased output Available in fixed output (e.g., 5 V) variants Typical Applications Automotive electronics (ADAS, infotainment, lighting) Industrial power supplies Distributed power systems General-purpose DC-DC regulation #commonpartslibrary #integratedcircuit #powermanagement #voltageregulator

Connector Header Through Hole 10 position 0.224" (5.70mm) 172065-0010 is a Mega-Fit® vertical PCB header from Molex, designed for high-current wire-to-board power connections. It features a dual-row, 10-circuit, through-hole configuration with a 5.70 mm pitch, making it suitable for industrial equipment, power supplies, automotive electronics, and other applications requiring reliable, high-density power distribution. The connector incorporates a polarized, shrouded housing and locking mechanism to ensure secure mating and prevent incorrect insertion. Key Features 10-position (2×5) vertical PCB header 5.70 mm pitch Mega-Fit® connector system Through-hole mounting for strong mechanical retention Supports up to 23 A per circuit Rated up to 600 VAC/DC 0.38 µm (15 µin) gold-plated mating contacts Tin-plated PCB termination Shrouded and polarized design with positive locking Operating temperature: -40°C to +120°C UL 94 V-0 rated housing material Compatible with Molex Mega-Fit receptacle housings for wire-to-board power applications. #CommonPartsLibrary #Molex #MegaFit #PowerConnector #PCBHeader #WireToBoard #ThroughHole #HighCurrent #IndustrialElectronics #PowerDistribution #Connector

Accelerometer X, Y, Z Axis ±400g 160Hz ~ 2.56kHz 16-LGA (3x3.25) The ADXL373BCCZ-RL7 is an ultralow power, high-g digital MEMS accelerometer developed by Analog Devices for motion sensing and impact detection applications. The device is optimized for battery-powered and always-on systems requiring continuous acceleration monitoring with minimal power consumption. It supports selectable measurement ranges suitable for shock, vibration, and activity monitoring in industrial, wearable, medical, asset tracking, and IoT applications. The accelerometer integrates embedded motion detection features, a FIFO buffer, and interrupt capabilities to reduce host processor workload and overall system power consumption. Engineering Specification Device Type Ultralow power 3-axis digital MEMS accelerometer Manufacturer Analog Devices Inc. Manufacturer Part Number ADXL373BCCZ-RL7 Measurement Axes Three-axis acceleration sensing Acceleration Range Selectable full-scale ranges supporting high-g measurements up to ±400 g Output Interface SPI digital serial communication interface Resolution High-resolution digital acceleration output with integrated filtering and signal conditioning Power Supply Requirement Operates from a low-voltage DC supply suitable for portable and embedded systems Power Consumption Designed for extremely low current operation during measurement and wake-up monitoring modes Embedded Features Integrated activity detection Motion and impact sensing FIFO data buffering Interrupt generation Wake-up detection functionality Sampling and Performance Programmable output data rates and filtering options for optimized noise and bandwidth performance Operating Temperature Range Industrial temperature range suitable for harsh environmental applications Package Type LGA surface-mount package Mounting Style Surface mount technology Application Areas Impact event recording Condition monitoring Asset tracking Industrial sensing Wearable electronics Portable instrumentation Shock and vibration monitoring Always-on motion detection systems #commonpartslibrary #integratedcircuit #accelerometer #sensor

The TGS2611-C00 specification defines the engineering requirements for a semiconductor gas sensor designed for the detection of combustible gases in industrial, commercial, and embedded monitoring systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure accurate gas detection, stable sensing characteristics, and long-term operational reliability. The sensor is intended for use in gas leak detection equipment, safety monitoring systems, residential and commercial appliances, industrial automation, and environmental monitoring applications. It utilizes semiconductor sensing technology to detect target combustible gases with high sensitivity and repeatable performance, enabling reliable monitoring and early warning in safety-critical environments. Engineering Requirements The gas sensor shall be manufactured using qualified semiconductor sensing materials and controlled production processes to ensure consistent sensitivity, repeatability, and long-term stability. The sensing element shall maintain reliable performance under specified operating voltage, temperature, humidity, and environmental conditions. Electrical characteristics shall provide stable output response, repeatable detection performance, and predictable recovery behavior following gas exposure. The sensor shall maintain reliable operation during continuous monitoring while minimizing drift and preserving measurement consistency throughout its service life. The sensing element shall provide dependable detection of the intended combustible gases while maintaining resistance to environmental influences and normal operational contaminants. The sensor shall exhibit stable response characteristics suitable for integration with embedded control systems and gas monitoring electronics. Mechanical construction shall provide adequate protection for the sensing element while allowing sufficient exposure to the surrounding atmosphere for effective gas diffusion. The package shall withstand handling, vibration, thermal cycling, and standard assembly processes without degradation of sensing performance or structural integrity. Workmanship shall be free from defects including contamination, mechanical damage, corrosion, package deformation, or structural inconsistencies that could adversely affect sensing accuracy or reliability. Inspection, validation, and testing shall be performed using calibrated equipment and controlled quality procedures to verify compliance with engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical specifications, gas sensitivity characteristics, qualification reports, inspection records, reliability data, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #GasSensor #CombustibleGasSensor #SemiconductorSensor #GasDetection #IndustrialSafety #EmbeddedSystems #EnvironmentalMonitoring #QualityAssurance #EngineeringDocumentation

Polymeric PTC Resettable Fuse 60V 500 mA Ih Surface Mount 2-SMD 500mA resettable fuse pptc The SMD050F-2 is a surface-mount resettable fuse (PPTC – Polymer Positive Temperature Coefficient) designed to provide overcurrent protection in low-voltage electronic circuits. It operates by increasing its resistance significantly when excessive current flows, thereby limiting current and protecting downstream components. Once the fault condition is removed and the device cools, it automatically resets to its low-resistance state, enabling normal operation without replacement. This component is commonly used in power supply lines, USB ports, battery-powered devices, and general electronic protection applications where space-saving and reliability are important. Key Features Resettable overcurrent protection (self-recovering) Surface-mount package for compact PCB layouts Low resistance in normal operation Fast response to fault conditions Automatic reset after fault removal RoHS compliant and lead-free Electrical Characteristics Hold current: 0.5 A Trip current: 1.0 A (typical) Maximum voltage: 60 V Maximum current: 40 A (fault current rating) Initial resistance: low resistance range suitable for minimal voltage drop Resistance after trip: significantly increased to limit current Thermal Characteristics Operating temperature range: -40°C to +85°C Trip time dependent on applied current and ambient temperature Reset time dependent on cooling conditions Mechanical Characteristics Package type: Surface-mount (SMD) Compact footprint suitable for dense PCB layouts Compatible with standard reflow soldering processes Applications USB and peripheral port protection Power supply and DC line protection Battery pack protection Consumer electronics Industrial control circuits Compliance and Standards RoHS compliant Halogen-free (depending on manufacturer variant) Meets industry standards for resettable fuses #commonpartslibrary #circuitprotection #ptc #fuse

JST PH Connector Header Through Hole, Right Angle 4 position 0.079" (2.00mm) The S4B-PH-K-S(LF)(SN) is a 4-position, single-row, right-angle (side-entry) male header designed for 2.0 mm pitch wire-to-board connections. It is a through-hole mounted, shrouded connector that ensures reliable and secure mating with compatible PH series housings and crimp terminals. This connector is commonly used in consumer electronics, embedded systems, power supplies, and industrial control boards, especially where space-saving and dependable connections are required. Key Features Connector Type: Shrouded male header (wire-to-board) Number of Positions: 4 pins (single row) Pitch: 2.0 mm Orientation: Right-angle (side entry) Mounting Type: Through-hole (THT) Termination: Solder Electrical Characteristics Rated Voltage: 100 V Rated Current: 2 A per contact Insulation Resistance: ≥1000 MΩ Contact Resistance: Low (typically ≤10–20 mΩ) Mechanical & Material Contact Material: Brass / phosphor bronze with tin plating Housing Material: PA66 (Nylon), UL94 V-0 flame rated Locking Mechanism: Detent lock for secure mating Shrouded Design: Prevents misalignment and protects pins Environmental Operating Temperature: −25 °C to +85 °C #CommonPartsLibrary #Connector #Header #JSTPH #MalePins #RightAngle #4pos

Slide Switch, SPDT, On-On, Through Hole, OS Series, 100mA # OS102011MS2QN1 ## General Description The OS102011MS2QN1 is a miniature slide switch manufactured by C&K, designed for low-power signal switching and control applications in electronic equipment. The switch features a compact mechanical design, reliable contact performance, and through-hole mounting configuration, making it suitable for embedded systems, industrial controls, instrumentation, telecommunications equipment, consumer electronics, and portable devices. Its robust construction ensures dependable operation throughout repeated switching cycles while maintaining stable electrical performance. The device is commonly utilized for mode selection, power control, configuration settings, and user-interface functions within electronic assemblies. ## Key Features ### Mechanical Characteristics * Miniature slide switch construction * Through-hole PCB mounting * Compact form factor * Durable actuator mechanism * Positive switching action * Designed for repeated mechanical operation ### Switching Characteristics * Maintained-contact operation * Reliable position retention * Low-force actuation * Stable contact engagement * Suitable for signal and control switching applications ### Electrical Characteristics * Low contact resistance * Reliable signal transmission * Stable switching performance * Suitable for low-current and low-voltage circuits * Consistent electrical operation throughout service life ### Contact System * High-reliability contact materials * Corrosion-resistant contact surfaces * Long operational durability * Dependable electrical continuity ### Material Construction * High-strength thermoplastic housing * Industrial-grade metallic contacts * Durable actuator assembly * RoHS-compliant materials ### Environmental Characteristics * Suitable for commercial and industrial electronic equipment * Resistant to mechanical wear * Reliable performance under normal operating environments * Designed for long-term service reliability ### Application Areas * Embedded Systems * Industrial Control Equipment * Consumer Electronics * Test and Measurement Instruments * Communication Devices * Medical Electronics * Power Control Circuits * User Interface Controls * Configuration and Mode Selection Functions * Electronic Development Platforms ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade Switching Component ## Manufacturer C&K ## Product Family OS Series Miniature Slide Switches #OS102011MS2QN1 #CKSwitches #SlideSwitch #MiniatureSwitch #ElectronicSwitch #PCBSwitch #EmbeddedSystems #IndustrialElectronics #ControlSystems #ConsumerElectronics #HardwareDesign #ElectronicsEngineering #SignalSwitching #PCBAssembly #ElectronicComponents #commonpartslibrary #switch #slide #spdt

RF ANTENNA Bluetooth, Wi-Fi, WLAN, Zigbee™ Ceramic Patch Solder Surface Mount The SWLP.2450.10.4.A.02 specification defines the engineering requirements for a surface-mount radio frequency antenna designed for wireless communication applications operating within the 2.4 GHz frequency band. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure efficient RF transmission and reception, stable antenna performance, and long-term operational reliability in embedded electronic systems. The antenna is intended for use in wireless communication devices supporting technologies such as Bluetooth, Wi-Fi, Zigbee, Thread, and other 2.4 GHz ISM band protocols. It is optimized for compact PCB integration while providing efficient radiation characteristics, stable impedance matching, and dependable performance in space-constrained electronic products including IoT devices, industrial controllers, consumer electronics, and smart sensing platforms. Engineering Requirements The antenna shall be manufactured using qualified conductive and dielectric materials with controlled production processes to ensure consistent RF performance, mechanical durability, and long-term reliability. The construction shall maintain stable electrical characteristics throughout the specified operating temperature and environmental conditions. Electrical characteristics shall provide efficient radiation efficiency, stable impedance matching, low return loss, and reliable signal transmission and reception across the intended operating frequency range. The antenna shall maintain consistent performance when integrated according to the recommended PCB layout and grounding practices. The RF structure shall minimize insertion losses and support reliable wireless communication while maintaining acceptable gain, bandwidth, and radiation pattern characteristics. The antenna shall exhibit stable performance under normal operating conditions without significant degradation caused by thermal variation or environmental exposure. Mechanical construction shall be suitable for automated surface-mount assembly and compatible with standard solder reflow manufacturing processes. The package shall withstand vibration, thermal cycling, mechanical handling, and environmental stress without degradation of electrical or structural performance. Workmanship shall be free from defects including cracks, contamination, plating irregularities, or structural inconsistencies that could adversely affect RF performance or reliability. Inspection, validation, and testing shall be performed using calibrated RF measurement equipment and controlled quality procedures to verify compliance with engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, RF performance specifications, impedance matching recommendations, qualification reports, inspection records, reliability data, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #RFAntenna #WirelessCommunication #Antenna #Bluetooth #WiFi #IoT #EmbeddedSystems #QualityAssurance #EngineeringDocumentation

Bipolar (BJT) Transistor NPN 40V 200mA 300MHz 350mW Surface Mount SOT-23 The MMBT3904-TP is an NPN general-purpose bipolar junction transistor (BJT) in a SOT-23 surface-mount package. It is a compact SMD version of the classic 2N3904, designed for switching and low-power signal amplification in a wide range of electronic circuits. It is commonly used in embedded systems, consumer electronics, and PCB designs where small size and reliable switching performance are required. Key Features NPN Bipolar Junction Transistor (BJT) Suitable for switching and amplification applications SOT-23 Surface-Mount Package Compact footprint for high-density PCB designs Collector-Emitter Voltage (Vceo) Typically up to 40V Collector Current Up to 200 mA continuous Low Power Operation Designed for small signal and low-power switching tasks High Gain (hFE) DC current gain typically 100–300 Fast Switching Capability Suitable for digital and pulse applications Wide Operating Temperature Range Typically -55°C to +150°C High Reliability Stable performance for general-purpose use RoHS Compliant Environmentally compliant manufacturing Typical Applications Signal switching in digital circuits LED driving circuits Small relay or load switching Sensor interface circuits General-purpose amplification stages 2N3904 SOT-23 #CommonPartsLibrary #Transistor #BJT #NPN #MMBT3904

2 Axis with Switch Thumb Joystick 10KOhms XDCR COM-09032 30.1mm from SparkFun Electronics #simplifiedFootprint

Connector Header Through Hole 5 position 0.100" (2.54mm) SWD header 1x5 2.54mm PinHeader 1x05 2.54mm horizontal The TSW-105-07-G-S is a high-reliability, through-hole, single-row pin header from Samtec’s TSW series. It is designed for board-to-board or wire-to-board interconnections in a wide range of electronic applications. Featuring a standard 2.54 mm pitch and gold-plated contacts, this connector ensures reliable electrical performance, durability, and compatibility with industry-standard mating components. Mechanical Characteristics Connector Type: Pin Header Mounting Type: Through-Hole Number of Positions: 5 Number of Rows: Single Row Pitch: 2.54 mm Orientation: Vertical Termination Style: Solder Contact Shape: Square Post Material and Plating Contact Material: Phosphor Bronze Contact Plating: Gold over Nickel Housing Material: Black Thermoplastic (UL94 V-0 rated) Electrical Characteristics Current Rating: Typically up to 3 A per contact Voltage Rating: Typically up to 500 VAC Contact Resistance: Low contact resistance for reliable signal transmission Insulation Resistance: High insulation resistance Environmental Characteristics Operating Temperature Range: -55°C to +125°C Flammability Rating: UL94 V-0 Applications Board-to-board connections Wire-to-board interfaces Prototyping and development systems Industrial and consumer electronics Compliance and Standards RoHS Compliant Lead-Free #CommonPartsLibrary #Connector #Header #TSW

Linear Voltage Regulator IC Positive Fixed 1 Output 500mA SOT-23-5 The TLV75533PDBVR is a low-dropout (LDO) linear voltage regulator designed to provide a stable 3.3 V output from a higher input voltage source. It features ultra-low quiescent current and high power-supply rejection ratio (PSRR), making it ideal for battery-powered and noise-sensitive applications such as IoT devices, portable electronics, and RF circuits. The device is optimized for fast transient response and stable operation with small ceramic output capacitors. Key Features Fixed output voltage: 3.3 V Low dropout voltage (typ. ~200 mV at full load) Ultra-low quiescent current (typ. 25 µA) High PSRR for noise-sensitive applications Stable with small ceramic capacitors (≥1 µF) Thermal shutdown and overcurrent protection Available in compact SOT-23-5 package (DBV) Absolute Maximum Ratings Input voltage: –0.3 V to 6.5 V Output voltage: –0.3 V to (VIN + 0.3 V) Operating junction temperature: –40°C to +125°C Storage temperature range: –65°C to +150°C Recommended Operating Conditions Input voltage range: 1.45 V to 5.5 V Output voltage: 3.3 V (fixed) Output current: up to 500 mA Operating temperature range: –40°C to +125°C Electrical Characteristics (Typical unless otherwise noted) Output voltage accuracy: ±1% Dropout voltage: ~200 mV @ 500 mA Quiescent current: ~25 µA PSRR: up to 70 dB (at 1 kHz) Line regulation: <0.05%/V Load regulation: <0.5% Pin Configuration (SOT-23-5) Pin 1: IN – Input voltage Pin 2: GND – Ground Pin 3: EN – Enable (active high) Pin 4: NC – No connect Pin 5: OUT – Regulated output Typical Application Power management for microcontrollers and sensors Battery-powered portable devices RF and analog circuits requiring low noise supply IoT and wearable electronics Protection Features Thermal shutdown protection Overcurrent protection Undervoltage lockout (UVLO) #commonpartsLibrary #integratedcircuit #powermanagement #voltageregulator

Polymeric PTC Resettable Fuse 6V 2 A Ih Surface Mount 1206 (3216 Metric), Concave NANOSMDC200F-2 – Surface-mount polymeric PPTC resettable fuse with a 2 A hold current rating. Designed for overcurrent protection in electronic circuits, it safely interrupts excessive current and automatically resets once normal conditions resume. Ideal for USB ports, battery-powered devices, embedded systems, and general consumer electronics, providing reliable, compact, and maintenance-free protection. #PPTCFuse #SMDProtection #ResettableFuse #OvercurrentProtection #2AHold #CircuitSafety #ElectronicsDesign

Fuse Holder 80V 1 Circuit Blade Through Hole General Description The 178.7017.0001 is a PCB-mounted fuse holder designed for cartridge fuses, typically used in power input protection circuits. It provides a secure and reliable method for mounting and replacing fuses in electronic assemblies. This component is commonly used in industrial equipment, power supplies, and consumer electronics where overcurrent protection is required. Key Features Designed for standard cartridge fuses (commonly 5x20 mm format) Through-hole PCB mounting for secure mechanical stability Reliable electrical contact with low resistance Easy fuse replacement and maintenance High-temperature resistant housing material Suitable for mains and low-voltage applications Mechanical Characteristics Mounting Type: Through-Hole (THT) Fuse Size Compatibility: 5 mm x 20 mm Orientation: Vertical PCB mount Housing Material: Thermoplastic (UL94 V-0 rated) Pin Configuration: 2-pin Electrical Characteristics Rated Current: Up to 10 A (depending on fuse used) Rated Voltage: Up to 250 VAC Contact Resistance: Low contact resistance for efficient conduction Insulation Resistance: High insulation resistance Environmental Characteristics Operating Temperature Range: -40°C to +85°C (typical) Storage Temperature Range: -40°C to +85°C Flame Rating: UL94 V-0 compliant Applications Power supply units Industrial control systems Consumer electronics Battery chargers AC mains protection circuits Compliance & Standards RoHS compliant UL recognized materials (depending on manufacturer variant) Notes Ensure compatibility with selected fuse rating and type Observe proper PCB layout spacing for high-voltage applications Follow safety standards when used in mains-powered circuits #commonpartslibrary #circuitprotection #fuseholder

RNMF14FTC8K20 RES-TH_BD1.8-L3.2-P7.20-D0.4 LCSC Part Number: C2584997 JLCPCB Part Class: undefined Manufactured by SEI(Stackpole Electronics Inc.)

Temperature Sensor Digital, Local -55°C ~ 150°C 16 b 6-WSON (2x2) The TMP117AIDRVR is a high-precision digital temperature sensor manufactured by Texas Instruments. The device provides accurate temperature measurements through an I²C-compatible digital interface and is optimized for applications requiring medical-grade accuracy, low power consumption, and compact PCB footprint. The sensor integrates a precision temperature sensing element, analog-to-digital converter, calibration memory, and digital interface into a single compact package. The device supports continuous conversion and shutdown operating modes, enabling efficient thermal monitoring in battery-powered and always-on systems. Internal calibration minimizes external component requirements while providing highly linear and repeatable temperature measurements across an extended operating range. The TMP117AIDRVR is commonly used in industrial controls, wearable electronics, healthcare equipment, environmental monitoring systems, battery management systems, consumer electronics, and precision instrumentation. Electrical Characteristics Supply voltage supports low-voltage digital systems and portable electronics applications. Ultra-low operating current enables long battery life in energy-sensitive designs. Integrated EEPROM allows programmable offset correction and configuration storage. Digital output eliminates the need for external ADC circuitry. High measurement resolution supports precision thermal monitoring applications. Low self-heating characteristics improve measurement stability and accuracy. Functional Features High-accuracy digital temperature sensing. I²C and SMBus compatible communication interface. Programmable alert functionality for thermal threshold monitoring. Continuous conversion and low-power shutdown operating modes. Integrated non-volatile memory for user configuration storage. Wide operating temperature range for industrial and commercial environments. Fast conversion timing suitable for real-time monitoring systems. Factory-calibrated performance requiring minimal external calibration. Package Information Package type is WSON with compact surface-mount footprint suitable for dense PCB layouts. Moisture-sensitive package designed for automated assembly processes. Lead-free and RoHS-compliant construction. Typical Applications Medical thermometers and patient monitoring systems. Industrial temperature monitoring equipment. Battery-powered portable electronics. HVAC and environmental sensing systems. Data acquisition and instrumentation systems. Server and embedded thermal management applications. Consumer electronics requiring precision thermal sensing. #commonpartslibrary #integratedcircuit #temperaturesensor

MAX-M10 RF Receiver BeiDou, Galileo, GLONASS, GPS, GNSS 1.561GHz, 1.575GHz, 1.602GHz -167dBm 921.6kbps Not Included Module The MAX-M10S-00B is a professional-grade, ultra-low-power GNSS positioning module from u-blox based on the u-blox M10 platform. It is designed for battery-powered applications such as asset trackers, wearables, IoT devices, and navigation systems. The module supports simultaneous reception of multiple GNSS constellations, providing high positioning availability, fast acquisition times, and excellent sensitivity even in challenging urban or weak-signal environments. It integrates a TCXO, LNA, and SAW filter to improve RF performance while maintaining very low power consumption. Key Features Multi-constellation GNSS receiver: GPS Galileo GLONASS BeiDou QZSS SBAS support (WAAS, EGNOS, MSAS, GAGAN) Concurrent tracking of up to four GNSS constellations for improved position availability and accuracy. Ultra-low power consumption: Approximately 25 mW in continuous tracking mode, making it ideal for battery-powered devices. High RF sensitivity: Tracking sensitivity up to −167 dBm for reliable operation in weak-signal conditions. High positioning accuracy: Typical position accuracy of approximately 1.5 m CEP under suitable conditions. Navigation update rate: Up to 10 Hz for responsive tracking applications. Integrated RF front-end: Built-in LNA (Low Noise Amplifier) Built-in SAW filter Integrated TCXO for stable operation. Supports Assisted GNSS services: AssistNow Online AssistNow Offline AssistNow Autonomous CloudLocate support for low-power IoT positioning. Communication interfaces: UART I²C NMEA and UBX protocols supported. Wide operating temperature range: −40°C to +85°C. Supply voltage: 1.76 V to 3.6 V. Typical Applications Asset tracking devices Wearable electronics Fleet management systems Industrial IoT Smart meters Drone and robotics navigation Personal navigation devices Timing and synchronization systems Package Information Package Type: Surface-mount LCC module Dimensions: 9.7 mm × 10.1 mm × 2.5 mm (typical module size) #Commonpartslibrary #RF #Wireless #RFreceivers #MAXM10S #uBlox #GNSS #GPS #Galileo #GLONASS #BeiDou #QZSS #NavigationModule #GNSSModule #GPSTracking #AssetTracking #IoT #IndustrialIoT #WearableTech #FleetManagement #DroneNavigation #EmbeddedSystems #ElectronicsDesign #PCBDesign #HardwareEngineering #LowPowerDesign #LocationTracking #Geolocation #RFDesign #LNA #SMTModule