RF Schottky Diode – Series-connected Schottky diode pair designed for RF mixer and detector applications, with a 1 V maximum peak reverse voltage, 50 mA maximum forward current, and 75 mW maximum power dissipation. Specified for operation over a −65°C to +150°C temperature range and housed in a SOT-23-3 package. #Skyworks #SMS7630 #SMS7630005LF #RFDiode #SchottkyDiode #MixerDiode #DetectorDiode #RF #Microwave #SOT23 #DiscreteSemiconductor #EmbeddedSystems

Earth Leakage Detector PMIC 8-SOIC #commonpartslibrary #integratedcircuit #powermanagement

Capacitive Touch Proximity Detector 16-WQFN (4x4) #CommonPartsLibrary #IntegratedCircuit #Interface #Sensor #Capacitive-Touch #FDC2214

Earth Leakage Detector PMIC 8-SOIC #commonpartslibrary #integratedcircuit #powermanagement

IC PROXIMITY DETECTOR 8 MINIDIP #CommonPartsLibrary #IntegratedCircuit #interface #Sensor #Detector #TDA0161

Sensor and Detector Interface 5.5V 0.7mA SPI Interface 8-Pin SOIC N T/R #CommonPartsLibrary #IntegratedCircuit #Interface #Sensor-Detector

Optical Sensor 900nm Photo Detector, Logic Output Logic Radial, 3 Lead, Side View #commonpartslibrary #interface #optical #sensor

Optical Sensor 900nm Photo Detector, Logic Output Logic Radial, 3 Lead, Side View #commonpartslibrary #interface #optical #sensor

Optical Sensor 940nm Photo Detector, Logic Output Logic Radial - 4 Leads #commonpartslibrary #interface #optical #sensor

The NE555 devices are precision timing circuits capable of producing accurate time delays or oscillation. In time-delay or monostable operating modes, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle are controlled independently with two external resistors and a single external capacitor. Each timer has a trigger level equal to approximately one-third of the supply voltage and a threshold level equal to approximately two-thirds of the supply voltage. These levels can be altered by use of the control voltage pin (CONT). When the trigger input (TRIG) is less than the trigger level, the flip-flop is set and the output goes high. If TRIG is greater than the trigger level and the threshold input (THRES) is greater than the threshold level, the flip-flop is reset and the output is low. The reset input (RESET) overrides all other inputs and is used to initiate a new timing cycle. If RESET is low, the flip-flop is reset and the output is low. Whenever the output is low, a lowimpedance path is provided between the discharge pin (DISCH) and the ground pin (GND). Tie all unused inputs to an appropriate logic level to prevent false triggering. The output circuit is capable of sinking or sourcing current up to 200mA. Operation is specified for supplies of 5V to 15V. With a 5V supply, output levels are compatible with TTL inputs. Features - Timing from microseconds to hours - Astable or monostable operation - Adjustable duty cycle - TTL-compatible output can sink or source up to 200mA - On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. Applications - Pulse-shaping circuits - Missing-pulse detectors - Pulse-width modulators - Pulse-position modulators - Sequential timers - Pulse generators -F requency dividers - Industrial controls

MAXIM INTEGRATED PRODUCTS - MAX9924UAUB+T - Specialized Interface, Sensor Interface, Camshaft, Crankshaft & Vehicle Speed VRS Interfaces, 4.5 V #CommonPartsLibrary #IntegratedCircuit #Interface #Sensor #Detector-interface #MAX9924

Sensor Interface Cold-Junction-Compensated K-Thermocouple-to-Digital Converter (0 C to +1024 C) #CommonPartsLibrary #IntegratedCircuit #Interface #Sensor #Detector-Interface

RF Detectors LT5537EDDB#TRPBF DFN-8_L3.0-W2.0-P0.50-BL-EP_LT5581IDDB LCSC Part Number: C672617 JLCPCB Part Class: undefined Manufactured by ADI(亚德诺)

RF Detectors LT5537EDDB#TRPBF DFN-8_L3.0-W2.0-P0.50-BL-EP_LT5581IDDB LCSC Part Number: C672617 JLCPCB Part Class: undefined Manufactured by ADI(亚德诺)

15Bit 3V~3.6V SPI SSOP-20-208mil Analog to Digital Converters (ADCs) ROHS The MAX31865 is an easy-to-use resistance-to-digital converter optimized for platinum resistance temperature detectors (RTDs). An external resistor sets the sensitivity for the RTD being used and a precision delta-sigma ADC converts the ratio of the RTD resistance to the reference resistance into digital form. The MAX31865’s inputs are protected against overvoltage faults as large as Q45V. Programmable detection of RTD and cable open and short conditions is included. ● Integration Lowers System Cost, Simplifies Design Efforts, and Reduces Design Cycle Time • Simple Conversion of Platinum RTD Resistance to Digital Value • Handles 100Ω to 1kΩ (at 0°C) Platinum RTDs (PT100 to PT1000) • Compatible with 2-, 3-, and 4-Wire Sensor Connections • SPI-Compatible Interface • 20-Pin TQFN and SSOP Packages ● High Accuracy Facilitates Meeting Error Budgets • 15-Bit ADC Resolution; Nominal Temperature Resolution 0.03125NC (Varies Due to RTD Nonlinearity) • Total Accuracy Over All Operating Conditions: 0.5NC (0.05% of Full Scale) max • Fully Differential VREF Inputs • 21ms (max) Conversion Time ● Integrated Fault Detection Increases System Reliability • ±45V Input Protection • Fault Detection (Open RTD Element, RTD Shorted to Out-of-Range Voltage, or Short Across RTD Element) #CommonPartsLibrary #IntegratedCircuit #PowerManagement

RF Detectors ADL5513ACPZ-R7 VQFN-16_L3.0-W3.0-P0.50-BL-EP1.7 LCSC Part Number: C579160 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)