Analog Devices Quad, Low Power, 12-Bit, 180 MSPS, Digital-to-Analog Converter and Waveform Generator analog devices DAC DDS *LFCSP*1EP*5x5mm*P0.5mm*EP3.6x3.6mm*

14-Bit 1 GSPS High-Speed Pipeline Analog-to-Digital Converter (ADC) – High-performance ADC designed for software-defined radios (SDR), radar systems, communications equipment, satellite receivers, instrumentation, signal intelligence, wideband data acquisition, and high-speed embedded processing. The Analog Devices AD9690BCPZ-1000 provides 14-bit resolution with a maximum sampling rate of 1 GSPS, using a differential analog input and JESD204B serial digital output for high-speed connection to an FPGA or other high-performance digital processing device. It supports an approximately 2 GHz full-power analog input bandwidth, programmable differential input termination of 50 Ω, 100 Ω, 200 Ω, or 400 Ω, an integrated voltage reference, differential clock input, and flexible JESD204B lane configurations. At 1 GSPS, typical total power consumption is around 2 W. The device also includes two integrated wideband digital processing paths, including NCO and cascaded half-band filtering, which can reduce the amount of data that needs to be processed downstream. The AD9690BCPZ-1000 uses a 64-lead LFCSP package (9 × 9 mm), operates over −40°C to +85°C, and is listed by DigiKey as active. It is particularly well suited for systems where a high-speed ADC needs to interface directly with an FPGA through JESD204B, such as the AMD Kintex UltraScale+ FPGA you provided earlier.

Power Management IC (PMIC) with Battery Charger – Integrated power-management IC for small single-cell lithium-ion battery systems, combining a linear battery charger, smart power selector, two 200 mA buck regulators, and three 100 mA LDO regulators. The Analog Devices MAX14745LEWX-T provides programmable regulator outputs, including 0.8–2.375 V / 0.8–3.95 V buck outputs and 0.8–3.6 V / 0.9–4 V LDO outputs. It supports I²C control, thermistor monitoring, power-on reset, voltage sequencing, and operates from −40°C to +85°C in a 36-bump, 0.4 mm-pitch WLP package. #AnalogDevices #MAX14745 #PMIC #BatteryCharger #LiIon #BuckRegulator #LDO #PowerManagement #I2C #EmbeddedSystems

LVDT Signal Conditioner IC – Converts half-bridge, 4-wire LVDT, and RVDT sensor signals into a unipolar or bipolar DC voltage proportional to position. The Analog Devices AD698AP integrates an excitation oscillator, voltage reference, synchronous demodulation, and ratiometric signal conditioning. It supports 20 Hz to 20 kHz excitation, up to 24 V RMS differential excitation, 0.05% linearity, and ±11 V output. The AD698AP is supplied in a 28-PLCC surface-mount package. #AnalogDevices #AD698AP #LVDT #SignalConditioner #PositionSensor #RVDT #SensorInterface #AnalogIC #Instrumentation

Power over Ethernet (PoE) Flyback Transformer – Surface-mount flyback transformer optimized for Power over Ethernet (PoE) powered devices, isolated DC-DC converters, industrial Ethernet equipment, IP cameras, wireless access points, IoT gateways, and embedded networking applications. Part of the Würth Elektronik WE-PoE+ Series, it is specifically designed for use with the Analog Devices LT4276 PoE PD controller and supports IEEE 802.3at (PoE+) power conversion. Features 38 µH primary inductance (100 kHz), 37 V to 57 V primary input, 12.5 V auxiliary winding at 30 mA, 1,500 Vrms isolation voltage, and operation over a 250 kHz to 400 kHz switching frequency. Built in a compact surface-mount package (13.46 × 15.00 × 12.70 mm), it is specified for −40°C to +125°C operation, making it ideal for high-efficiency isolated PoE power supplies in demanding industrial and embedded environments. #WurthElektronik #750310742 #WEPoEPlus #PoETransformer #FlybackTransformer #PowerOverEthernet #IEEE8023at #LT4276 #DCDCConverter #IndustrialEthernet #EmbeddedPower #EmbeddedSystems

Maxim Integrated PLL Frequency Synthesizer Single 23.5MHz to 6000MHz 32-Pin TQFN EP QFN-32 Maxim None MAX2871ETJ+ Unavailable Maxim Integrated MAX2871 ultra-wideband fractional-N / integer-N PLL frequency synthesizer with integrated VCOs, capable of generating RF frequencies from 23.5MHz to 6.0GHz. Features programmable output dividers (1/2/4/8/16/32/64/128), dual differential RF outputs with programmable output power from -1dBm to +8dBm, low phase noise performance, phase frequency detector up to 140MHz, reference frequency up to 210MHz, fast lock and cycle-slip reduction, automatic/manual VCO selection, on-chip temperature sensor with 7-bit ADC, 4-wire SPI-compatible serial interface, and operation from -40°C to +85°C. Suitable for wireless infrastructure, clock generation, microwave radios, RF signal generation, and test & measurement equipment. MAX2871 Search Keywords: MAX2871, Maxim MAX2871, Analog Devices MAX2871, PLL synthesizer, RF synthesizer, fractional N synthesizer, integer N synthesizer, 6GHz frequency synthesizer, RF signal generator IC, integrated VCO synthesizer, microwave synthesizer, SPI frequency synthesizer, dual output PLL, clock generation IC, wireless infrastructure synthesizer Hashtags: #MAX2871 #MaximIntegrated #AnalogDevices #PLLSynthesizer #FrequencySynthesizer #RFSynthesizer #FractionalNPLL #IntegerNPLL #IntegratedVCO #RFSignalGenerator #MicrowaveRadio #ClockGeneration #WirelessInfrastructure #SPIInterface #TestAndMeasurement #RFDesign #RFIC #PhaseLockedLoop

LTC4365ITS8-1#TRPBF TSOT-23-8_L2.9-W1.6-P0.65-LS2.8-BL LCSC Part Number: C688328 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

Monitors & Reset Circuits LTC2974CUP#PBF QFN-64_L9.0-W9.0-P0.50-BL-EP7.2 LCSC Part Number: C683902 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

Digital To Analog Converters (DACs) LTC2755CUP-14#PBF QFN-64_L9.0-W9.0-P0.50-BL-EP7.2 LCSC Part Number: C682665 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

Monitors & Reset Circuits LTC2974IUP#TRPBF QFN-64_L9.0-W9.0-P0.50-BL-EP7.2 LCSC Part Number: C683905 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

LTC4292IUJ#TRPBF QFN-40_L6.0-W6.0-P0.50-BL-EP LCSC Part Number: C687971 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

Digital To Analog Converters (DACs) LTC2754AIUKG-16#PBF QFN-52_L8.0-W7.0-P0.50-BL-EP LCSC Part Number: C682645 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

LTC4368CMS-1#PBF MSOP-10_L3.0-W3.0-P0.50-LS5.0-BL LCSC Part Number: C688384 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

LTC6811HG-2#TRPBF SSOP-48_L12.8-W5.3-P0.50-LS7.8-BL LCSC Part Number: C689570 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

Digital To Analog Converters (DACs) LTC2668CUJ-16#TRPBF QFN-40_L6.0-W6.0-P0.50-BL-EP LCSC Part Number: C682587 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

AC-DC Controllers & Regulators LTM8074IY BGA-25_L4.0-W4.0-R5-C5-P0.65-TL LCSC Part Number: C690771 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

Timer LTC6909CMS#TRPBF MSOP-16_L4.0-W3.0-P0.50-LS4.9-BL LCSC Part Number: C689661 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

DC-DC Converters LT8609AEMSE#TRPBF MSOP-10_L3.0-W3.0-P0.50-LS5.0-BL-EP LCSC Part Number: C673982 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

Signal Buffers, Repeaters, Splitters LTC4304CMS#PBF MSOP-10_L3.0-W3.0-P0.50-LS5.0-BL LCSC Part Number: C688024 JLCPCB Part Class: Extended Part Manufactured by Analog Devices